Тёмный
Dakemp
Dakemp
Dakemp
Подписаться 1,4 тыс.
Here at Dakemp RU-vid channel we thrive to bring our subscribers original Nissan S chassis, D chassis and all around automotive content! If you enjoy custom turbo setups, dangerously high mileage turbo turds you have come to the right channel.
WILL IT START? Neglected Nissan Frontier
23:17
3 месяца назад
My 1986 Nissan 300zx Wasn't Very Happy..
25:40
3 месяца назад
Worlds Cheapest 240sx Hits the Racetrack
13:16
3 месяца назад
Turbo Charged S13 Head Gasket Replacement
29:56
4 месяца назад
Nissan D21 Engine In My S13 240sx (Install)
11:04
5 месяцев назад
Turbo 240sx Hits The Dyno
15:26
6 месяцев назад
TURBO 240sx First Start | Worlds Cheapest 240sx
18:06
6 месяцев назад
Worlds Cheapest Turbo 240sx | Interior install
17:01
7 месяцев назад
Worlds Cheapest Turbo 240sx | Engine Install
17:10
8 месяцев назад
Worlds Cheapest Turbo 240sx Drift Build!
15:17
8 месяцев назад
New Interior Install - 1986 300ZX
18:53
8 месяцев назад
Daily Driving My 1986 Nissan 300zx
22:05
9 месяцев назад
Turbo Nissan Hardbody Destroys Transmission
17:10
9 месяцев назад
WILL IT RUN? | Nissan D21 Hardbody
16:51
9 месяцев назад
Turbo D21 Is Ready For The Track!
12:01
10 месяцев назад
Street Drifting In Mexico
12:42
10 месяцев назад
Drifting My Turbocharged Mini Truck
10:12
10 месяцев назад
Custom Drift Brake | Nissan D21 Hardbody
20:23
10 месяцев назад
THE BEST ENGINE IN THE WOLRD?
19:00
11 месяцев назад
Drifting in New Mexico | Whisky Garage Round 4
18:28
11 месяцев назад
Комментарии
@dank5015
@dank5015 14 дней назад
I wish you had a million subscribers, appreciate you!
@blqnk6270
@blqnk6270 15 дней назад
Dude you have ALL the problems my 1986 300zx has LOL! I just got the exterior done but my power steering and interior are yuck! Perfect video man, thank you and I'll do a DIY job due to your video!!
@matthewschota6907
@matthewschota6907 15 дней назад
Do you know if 240sx ka rods and pistons will fit in ka24e hardbody motor?
@karmafarbus160
@karmafarbus160 22 дня назад
tubing shortage in Nevada right now , Biden's America
@jasonoverton6537
@jasonoverton6537 Месяц назад
I'm doing the same build on a 93 coupe cool to see your doing the same thing
@garystrange1131
@garystrange1131 Месяц назад
Do you have any d21 parts?
@lil-man
@lil-man Месяц назад
Hey!! I made the same kind of bed for mine!!! Totally cool
@josemauriciomorales7687
@josemauriciomorales7687 Месяц назад
Did you have to get diferent engine
@ggsgarage7054
@ggsgarage7054 2 месяца назад
What kind of clutch was yu using
@Kiwismakemytongueitch
@Kiwismakemytongueitch 2 месяца назад
I have an 85 that was basically gutted besides the carpet and back seat but idk where any of the harware goes to all the interior parts it’s just in ziplock bags
@jameschilders9353
@jameschilders9353 2 месяца назад
subbed to this channel now glad I found it keep going dude!
@UNEXPLAINABLE_NIGHTRIDER
@UNEXPLAINABLE_NIGHTRIDER 2 месяца назад
Damn u still rocking the old distributor
@Clayton-markisich
@Clayton-markisich 2 месяца назад
Where are you located?? I have one that I bought from a buddy but there’s a few things wrong with it
@AngelWingrc
@AngelWingrc 2 месяца назад
Do you need wheel spacers?
@gabel4277
@gabel4277 2 месяца назад
This makes me think very hard on getting a z31
@Dakemp240
@Dakemp240 2 месяца назад
Everyone should experience the difficulties of the z 😅
@PDofLA
@PDofLA 3 месяца назад
Awesome! Now that you have a forklift, I can send you my spare KA to turbo for me. 😂
@Dakemp240
@Dakemp240 3 месяца назад
😅 if only the damn thing would move
@nikibobby
@nikibobby 3 месяца назад
First to the comments.
@AndrewBaker-xt3dv
@AndrewBaker-xt3dv 3 месяца назад
Hell yeah love it brother. Got a 96 Hardbody myself
@Viking8888
@Viking8888 3 месяца назад
Not an LS dude. Go RB26! Although the LS is probably cheaper and you can get parts at the corner store! 😉🤪
@Allussion
@Allussion 3 месяца назад
I love my z31 and my frontier haha
@ka.powered8328
@ka.powered8328 3 месяца назад
If it doesn't cost too much I think u should rebuild it... And then run it till it dies
@twotone20048864
@twotone20048864 3 месяца назад
You have something else going on if your fuel economy is that low. I have 6 of them and I have never gotten below high teens. I average in the upper 20s. Also, a VG is a difficult engine to blow up. Unless you intentionally do something to kill it, it probably won't die.
@Dakemp240
@Dakemp240 3 месяца назад
I'm sure the O2 sensor isn't doing the right things anymore, and I keep the rpms rather high. Also I agree.. it will never die
@lucionsrandom5195
@lucionsrandom5195 3 месяца назад
If that fuse blows again, check for continuity to ground on pin 36 of the ECU. (While still plugged in, backprobe it.) The 02 wiring made me think of how these cars use common grounds for a lot of things, and the MAF happens to share that common ground.... And you removed the air filter and it ran fine... Not to mention, these are self cleaning MAF's, which is probably what kills 90% of Z31 batteries that don't drive often.
@Defensedefumer138
@Defensedefumer138 3 месяца назад
A bad maf had me chasing problems for like a month. I swapped it out got it running great, then LS swapped it. I liked the VG but that LS has so much bottom end torque. I don't regret it.
@Dakemp240
@Dakemp240 3 месяца назад
I think I'm leaning towards an LS too.
@julesvideoarchive
@julesvideoarchive 3 месяца назад
Been missing the Z content I just bought a 1985 300ZX Turbo and was watching the 300zx vids here before I bought it now I'm glad they're back!!!
@darkmoonblade1329
@darkmoonblade1329 3 месяца назад
I'm happy to see a z31 video. My shitass wants to see a vq35de put in it 😅. Can't really go wrong with an ls motor tho. Hope to see more Z content in the future!
@lukeschofill9158
@lukeschofill9158 3 месяца назад
Love the z content
@robsan9156
@robsan9156 3 месяца назад
Please don't LS it! Rebuild the VG 👍
@Dakemp240
@Dakemp240 3 месяца назад
A difficult situation fs
@alexistecca408
@alexistecca408 3 месяца назад
So glad she’s back man you inspired me to fix up my 300zx glad your still updating us on it
@trevorhume2554
@trevorhume2554 3 месяца назад
the stock ECU cannot hand the amps the aftermarket fuel pump draws and will short the ECU. You need to do a Fuel Pump Relay Mod on these cars to not short the ECU.
@Dakemp240
@Dakemp240 3 месяца назад
I say let it burn😂
@lawrencehayden753
@lawrencehayden753 3 месяца назад
Drop the tank yes
@Grainsauce
@Grainsauce 3 месяца назад
Just curious why was CVT used for power steering fluid, is it better than ATF?
@Dakemp240
@Dakemp240 3 месяца назад
Only thing I had haha
@Grainsauce
@Grainsauce 3 месяца назад
What are your plans for the head, were you using a MLS headgasket before also?
@Dakemp240
@Dakemp240 3 месяца назад
No, they were both OEM gaskets. We are checking the block for cracks this week.
@ka.powered8328
@ka.powered8328 3 месяца назад
Man I love your little shop!
@Sputnik360
@Sputnik360 3 месяца назад
Loving the turbo single jingle content.👍
@alexistecca408
@alexistecca408 3 месяца назад
Miss the 1986 Nissan 300zx 😢
@Dakemp240
@Dakemp240 3 месяца назад
She's coming back next week! She's not happy...
@alexistecca408
@alexistecca408 3 месяца назад
I got one for $500 from my brothers friend and I was trying to do the same as you bro put in a turbo and fix maybe the seats hopefully she comes back another time for a video 👍🏽🔥
@nezzyboiiproduction5529
@nezzyboiiproduction5529 4 месяца назад
First like first comment
@iiXtcy
@iiXtcy 4 месяца назад
Do the 350z wheels bolt straight on ?
@Dakemp240
@Dakemp240 3 месяца назад
Yes, they need 1.5" spacers to fit right
@darkmoonblade1329
@darkmoonblade1329 4 месяца назад
Always come back to this playlist and re watch these videos. I have an opportunity to buy a 1986 slicktop manual z31 for $600, i want to, but it's intimidating for a first project car 😅.
@danielthecaraddict6389
@danielthecaraddict6389 4 месяца назад
Bring the Z back!
@Dakemp240
@Dakemp240 3 месяца назад
She's back on Monday! 3/18/2024
@ka.powered8328
@ka.powered8328 4 месяца назад
What kind of impact gun were u using(the yellow one) and how long have u had it? And did u ever have to replace any batteries on it?
@Dakemp240
@Dakemp240 3 месяца назад
I think you're talking about the 20v brushless Dewalt impact. She goes all day with one battery
@ka.powered8328
@ka.powered8328 4 месяца назад
Man I was missing a video from u...
@PDofLA
@PDofLA 4 месяца назад
😄👍 Same!
@cesarcorujo-ce9vu
@cesarcorujo-ce9vu 4 месяца назад
New sub 😎🔥💯 buying my z31 next Thursday taking a look at it today after work 👍🔥🥰 red
@gabel4277
@gabel4277 4 месяца назад
👍👍👍
@julesvideoarchive
@julesvideoarchive 4 месяца назад
This dude has fuckin discipline yo. "new problem. lets fix it :)" nice mindset fr
@quadaddiction4511
@quadaddiction4511 4 месяца назад
Awesome video bro
@loganjones7761
@loganjones7761 4 месяца назад
How’d you get the ujoint back onto input shaft?
@PDofLA
@PDofLA 5 месяцев назад
That was fun till.......... well........ the ending sucked! 😫 Hopefully you share the reason for the excess pressure with the rest of the class.
@Dakemp240
@Dakemp240 4 месяца назад
I'm sure most know why😅 will spill the beans in the next video
@darkmoonblade1329
@darkmoonblade1329 5 месяцев назад
such a love hate relationship with the z31, I both love and hate how it looks
@Dakemp240
@Dakemp240 5 месяцев назад
Haha, agreed.
@orionkyle2922
@orionkyle2922 5 месяцев назад
I’m doing the same thing but I’m not turbocharging it do I still have to get it tuned?
@Dakemp240
@Dakemp240 5 месяцев назад
Nope! No tune necessary.