This Channel has grown past our wildest expectations, and we Thank you ALL!!
As we move forward into this new norm, we call life it is now more important to be self-sufficient and as our Channel name states DIY so we will continue to try and bring the most informative videos that will enhance your life.
Thanks for all the likes and comments!
Disclaimer: Although we are professionals by no means are our videos meant for anyone who does not understand the dangers of anything seen in the videos on this channel. We are not responsible for any injury, loss of body functions, or death while trying to attempt something uploaded to this channel.
As an Amazon Associate, I earn from qualifying purchases.
We are Amazon Affiliates so please use our links it cost you nothing and we make a few pennies!
@@kampalamails6354 while the watch over all is good I believe the QC QA should be a tad better or the price lowered a bit....NH35A movements are cheap BTW as in like 30-45 bucks
have you tried 4S configuration, I have same system as you and I cannot decide on 4S or 3S1P config. The Renogy 40 amp controller can go up to 100V, at 4S I'm bringing in 86V which is under the 100max. 3S1P I bring in 62V I think, if I remember correctly. Battery charges faster at higher voltage and more efficient, but charges longer when running panels in Parallel. (charges earlier and later in the day). Have you tried different panel configurations? I'm using mine for an off grid shed.
I haven’t tried getting around 36+A from about 10AM to about 4 we have a lot of trees so didn’t want the system to suffer from shading at different times
@@Friends_and_fragrances this was just a shot in the dark to see if the market improved and obviously not LOL this was more to inform those who expect mor
@@KTZ_86 so we as the channel have many people working to make it function so I like to include everyone when I say we......the gloves were 2 reasons keep dust and finger oil out of the movement when I opened it and my hands were ashy AF at the time that was recorded 😜😂🍻
I've had Amsoil BP on my truck for 21 years with no such problem. Install the threaded nipple with permanent loctite and stake it in a couple spots and it won't happen again.
@@DIYKAI Ahh... I see so many watch channels wearing gloves... which makes sense if its a new Royal Oak and an investment that they want to keep 100% pristine... But then I see everyone else copying that when reviewing cheap watches, I think because they saw the other channel do it and so they think that is how a watch review should look... The way I see it, if the watch is stainless and its one you mean to actually wear, the gloves are kinda silly... unless you plan to wear them all the time when wearing the watch? haha
How is it a fake? It says steeldive on the dial, so It's technically a homage. I have the Willard version and it's a great watch in my opinion, and I wear it more often than my seadweller and seamaster.
This is a heavy watch so if you have never been in a gym this watch is not for you, plus you are changing the date in the danger zone, If you keep the time at 6,30 you could have a different outcome.. Also the bezal is lineing up, Stop whinging
First off the warning was for people to know it was a heavy watch....if you read the instructions the "danger" zone you speak of is not even mentioned for a 35 movement only a 36.....the bezel lines up in-between clicks and a small bump knocks it off....you could never dive with this........ Sounds like your a fan boi of steel dive
@@DIYKAI oh you definitely could dive it that watch, all you need to do is add +30 to the time or the other way round, so don't talk daft Secondly every movement has a danger zone
@@Andy-ys8sj what are you talking about crazy….this watch would have never survived diving as stated in the video the watch case back was finger tight water would have rushed in at any depth……and yes I know every watch has a zone where you make adjustments again I was stating what was in the instructions……trust me I own MANY watches and this was just another heavy pile of metal to show other what not to buy….thank for your comments
@@DIYKAI do you want honk it’s possible to be leaking into the turbo? I’m getting excessive pressure build up in my radiator and it’s pushing coolant into the reservoir. I’ve done a pressure test and combustion gas test already.
@@HanktheTank349 if your building pressure it would not be from the turbo....pressure test will only show you a leak.....you might have some head walk or a head gasket starting to go out....have you checked the torque on your head bolts I have seen them loose before
@@DIYKAI I haven’t checked the torque on them yet. I’ll look into that. I have to rebuild the turbo anyways, the bearing is making a high pitch noise… which is why I found your video. Thanks for your help
I have several steeldives and not a single one has had a blemish. You got 1 bad one, that happens with everything. I've gottwn shit seikos that should've failed QC. Return it and carry on. Not even going to finish watching the video.
They have to pay huge import taxes, which is why they want you to list it as $30.00 I've dealt with Chinese companies for years. 99% will replace your item. I've had customs destroy over $1,000 worth of products and companies ha e always made it right. If you would've done what they asked, you would've got your replacement.
Seems like watch is not new 😔. Many people buy new but after a time return it for every reason not for defective, and next probably the vendor sell it again, is peculiar behaviour of both parts the real victim is the next buyer sadly. This is the reason that many phsycal stores not accept returns in case of watches because is a very complicated theme, only if the watch is defective the warranty with the manufacturer is applied instead.
Loved the opening scene 😅😢 it’s what I was expecting…. It was a real surprise to see you continue. for others here that don’t know how funny this joke is. Try to find something even remotely related to CVT. I’ve been searching for this for what seems like half a year now. I’m sure they got a kick out of it too. That was great. I loved the content. thanks so much and great sense of humor.❤❤❤ The fact that dealerships won’t let people work on their cars anymore pretty much tells me that they don’t want my money from here on out. I’m sick of this and I really don’t see how they can continue to have customers if they continue to treat us like stupid people that don’t know how to fix things on her own. It’s just not fair. It really should be against the law. These are our vehicles and we should have the full rights to the entire instruction manual and the full capability to fix things if we choose to.🎉❤
@@stephenriggs1424 thanks 🙏 yea I thought some folks may get a kick out of it.... unfortunately many manufacturers are doing this to try and force you back to the stealership but we will always find a way 😁 Thank for tuning in!
It was either this or the 9’ x 17-1/2” black widow aluminum ramp 4 beam from discount ramps for 574$. I think I’m sold with this one after you mentioned the 2x4.
@@TBSWORLD77 yes....first the motor has been fine thank God we put around 25k hard towing miles on it so far.... As far as the product goes Sinister did reach out to us and sent us a new kit this one has not given any issues so far!
If I remember correctly going from the bottom was the easy way but if you move a few things and have small enough hands you can probably get it from the top
Bought ours new in 2021 Only issue we have had so far is something with antlers rubbed on it, likely got them caught in the ladder, freaked out, dented the side a little and broke a tail light. Otherwise, no issues so far! We keep it on some property we own and it has been a dream. I would recommend replacing the standard mattress it comes with and get a hybrid one. Super easy to maintain as well. Just follow the recommended winterization and maintenance guild provided and it will serve you well.
So we have since travel across the US with it and the only issues we have had so far was a leak in the shower (dealership couldn't even fix it) so we torn it all out and redid it all is good now. The passenger side seems to sit a little low we always had to use blocks on that side. Definitely replaced the mattress with memory foam 😀.
I have one chins 51.2 volt battery. It's 5120watt hours so the same as 2 zooms 200 amp batterys. I have a 48 volt 2500 watt power inverter. I have a hqst 60 amp charge controller and have 4 100 watt panels coming. Right now I have a 48 volt 20 amp charger. Charges at 1105 watts per hour.
