These hoods are for aero brake levers. Unfortunately, I do not have an bikes or experience with non-aero brake levers. (I believe that's what you mean)
Why ones I have can only maintain 200+MB/s to some extent before it drop to below 100MB/s? My TrueNAS is latest version 24.04.2. I has a SSD in but this slow down still causing issues
I ordered new Mustang key Fob I received but back of it snake cobra logo I’m assuming Shelby fob Didn’t work now have to return it I’m so mad I ordered for 2016 Mustang GT I received with cobra logo on it it’s not working
Hi rufusthestuntbum07, the model listed is for the Exage Motion line of brakes. The one on the Centurion are the Exage Sport line. The model number of those are BL-A451/BL-A452. Hope this helps.
Good question. If you have multiple users of this device, you will have to go into the settings of the phone you want to use and connect it to the adapter.
any idea what would be melting the ground/negative cable on a pilot almost identical to yours?? Brand new battery, alternators fine, new starter all of the connections are tight. All of the wiring looks good but the ground keeps getting hot enough to melt the sheathing… Weird
Hi Snuffles, I've changed the batteries on numerous cars and have not had any major issues. Occasionally, I've had to enter the security code for my radio, adjust the time or re enter the presets for my radio stations. Not a biggie. I do have a video on a Memory Saver product that keeps power to your car during battery swaps, so it keeps your settings if you want to check that out. That said, all my cars are pretty standard, (Ford, Toyota, Honda) So, I can't speak for all cars, or high end cars.
Hi gabrielmaroto18. That's interesting. I've purchased several of these and they've all had one roll per bar. That's said, it's been a few years, and they could have changed their packaging. Please keep me updated on this. Thanks!
I bought a 2019 ecoboost and accidentally set up mykey. The car only came with 1 key. Will this method work if i purchase a blank key and program as the admin key?
@@BIsForBudget thank you. One last set of questions. Does the ruff surface of the folded down center of the seat cause any irritation or feel uncomfortable? It looks like it would, but it also looks like it would keep you from sweating. Thanks so much for your review and answers to my questions. I would really like to purchase these today.
@@JackieM-jt6en Hi, no issues with the folded down option. It has texture, but it didn't cause any itchiness or irritation. That said, I ended up going with the "up" option. It is softer and I like the look of the solid color.
got stuck with setting up the new NIC's IP address. For anyone else, my solution is listed below: 1. After installing the new network card, have both ethernet ports (integrated & pcie network card) connected. 2. Go to the network interface then reset the integrated's network settings 3. Copy over the same ip setting to the new (pcie network card), then save. 4. Test the settings and the pcie network card should have your pre-exiting ip addresses assigned to it. 5. Go to BIOS menu to disable the integrated LAN. 6. Boot as normal - this should now be using your pcie network card.
I have this. While I love the box, the locks are junk. For the price, I'd have expected much better. I'm fully expecting to have to replace them at some point. Nice vid. Thank you. 👍
Ok so i tried typing in the shell the same info and only the M/B ethernet showed up which is telling. Any advice would be biblically helpful at this point please. Many thanks in advance Regards Chris
Hmm.. that's odd. Is your TrueNAS box running Dragonfish-24.04.2 and have the same TP-Link NIC card? If so, try another PCIe slot. Actually, I have seen the ability to disable PCIe slots in BIOS. Maybe it was disabled in the past.
Fantastic video and the only one ive found so far. I added a usb 3 2.5gb adapter and it auto works at 1gb but not at 2.5gb. Do i need to do the same as you in this video? if so can you do another video showing step by step of how to get to each screen from boot. So from press F11, or F?? and so on as many of us do not know how to get to the screens showed so that in itself would be great as most of us are noobs trying to learn but there are too many how to vids with showing it done but not step by step monkey see monkey do guides. Please help us (me :) and if you understandably dont have time to do a video would you mind writing a short guide on how to achieve the same as you please. Kindest regards Chris
Well I have the same kind of adapter just a different brand. I have a 2 TB HDD I want files from a 2.5 but when connected to my pc it doesn’t even shows it is connected? Any idea why? Please help
Please confirm it's drive and pc you're connecting to is running the same OS. Do you have another laptop/Desktop you can plug the Hard Drive adapter and drive into? Worst case, do you have a PC that you can open up and connect directly with a SATA Cable?
Hi Tigerhawkprime. I didn't install any additional drivers. I just updated my instance of TrueNAS scale to the latest version (Dragonfish-24.04.2) and the drivers were already in there. It automatically recognized the TP-Link Nic. Just make sure that Networking is 2.5GbE from end to end.
Good question. With 2 Nics you can set up network teaming for redundancy/failover and Load Balancing. Its good for Network Isolation. You can also setup routers and firewalls For my VMware ESXi hosts, I like to have a separate nic for host management. Those a few things you can do with 2 nics off the top of my head. That said, for my lab, a single NIC served my needs. lol I am eyeing a Mini PC with two 2.5GbE NICs...
Have been using this for over a year on my Android phone in my vehicle. Yes, it does have hiccups, sometimes it disconnects, and sometimes, it takes a bit to connect. Such a minor inconvenience. With this said, it is still 100 times better than plugging in the phone each time and unplugging when you get out of the car. Just received a second one today to put in my wife's car. I hope to remember how to connect it. I remember it was a little more complicated when installed my Android version in my car. I watched your video so maybe I can use it to ease the process.
@@BIsForBudget Took me all of 10 minutes to get it set up the second one - used your video as a refresher even though it's Android. Took me longer to find double-sided tape to secure it!🤣
I personally dont have a graphics card in mine. However, it does have a PCIe (Gen 3) slot and if the graphics card has drivers for the OS you're using, I don't see why it wouldn't work. One word of caution, my T30 only came with a 290W power supply. So, I would look at the power consumption of the GPU you pick.
Please help me, everything works fine i get and find the harddisk "D" when i get in and go to "Users" and try to open my stuff there, its just only loading for a long time and nothing happens how can i fix that and what's the cause??..
So what do you do if you didn’t give power to the memory saver and are dealing with the Enter code problem with the VHF? I may or may not have just replaced it without the OBD-II cord/memory saver out of necessity
Hi elgs1980. There's a clip on the inside of the door that is used for outgoing mail. You just slip the outgoing mail into the clip which prevents it from dropping down into the box. That said, I've been using USPS Collection Boxes for years.
I have a 2023 Toyota Corolla LE non-hybrid 2.0 and and people at the AutoZone told me to get the H5 and I got it and it didn’t fit so then I got the h4 and it fit and worked on the car perfectly it seems like some people experiencing fitment issues maybe I can help by giving the make and year and model of my car
I haven't had a problem so far running the box 24/7 for 6 months. I'll keep you posted as to how things go long term. That said, this is for home/homelab use, nothing mission critical.
Hello guys, I have one problem. I have recently bought the cableexpert USB to IDE/SATA adapter cable, which was previously under gembird. I have tried it with 2,5" IDE laptop hdd - worked, then with 3,5" IDE and 3,5" SATA HDD with the external power supply from the box - worked, but when I connected to the power supply 2,5" SATA HDD it did not turn on. I used the external power supply from the box, I connected the molex-to-sata power cable as in the case of 3,5" SATA HDD, but it just did not power up.
@@kingjohnleo hello, well actually I took it to the shop and I made a reclaim. I will see what was the cause, but I presume it was the external power source.
I just got this exact 837 media tower on FB marketplace and was struggling to put it together until I saw your video. Your camera work, narration, and pacing are all excellent! Going to install the wall anchors now. Thank you!
Hi Brucehamp6859. The requirement for this process to work is to have 2 existing keys to program a third. From what I understand, to reprogram a car with a new set of keys, you would need to go to the Ford Dealership.
@@BIsForBudget I just paid a locksmith to come get into my car and program a new key fob and he told me that the old stolen key can still be used to get in and start the ignition, so I'm really looking for an alternative, because what you just showed in this video >I< could've done for probably 50 bucks vs the 460 I just spent. If you have any ideas/alternative routes I can take pls let me know, cos I'm already knee deep and he said it's going to be another 265 for another key that wipes the old one off.
@@brucekhamp6859 Hi Brucekhamp6859, I'm not aware of any alternatives beside going to a dealership and having them re-key the entire call. I'm sorry to hear you're in this situation.
