Тёмный
Michael Borquez
Michael Borquez
Michael Borquez
Подписаться
I hope to provide the best in free entertainment for my fellow youtubers. I post everything from "how to videos" to "funny videos" so stay tuned. I hope in the coming year to increase content to at least 1 video per week, take care everyone.
Fan Ejected Dodger Stadium Pushes Security
0:46
2 месяца назад
Coleman B200RSV Engine Swap 224cc Predator
1:08:24
6 месяцев назад
Coleman Minibikes Stage 0 1 2
3:46
4 года назад
Комментарии
@jackofalltrades123
@jackofalltrades123 День назад
I keep hearing the term "flagship". What does that mean?
@elbacanreal
@elbacanreal 5 дней назад
Have you noticed the motor/ inerds of the tool taping against the case when you move the tool back and forth??
@rschilling78
@rschilling78 6 дней назад
Thanks.
@EdnaCarroll-x7d
@EdnaCarroll-x7d 10 дней назад
Young George Robinson Jeffrey Wilson Melissa
@gasisthepastendoil
@gasisthepastendoil 10 дней назад
.... I took off the box on a 2013 Camry And I couldn't find any restriction
@DavidPerez-fi7pj
@DavidPerez-fi7pj 11 дней назад
Thank you sir , helped me out with my car 9 years later
@BrianStewart-sb9mq
@BrianStewart-sb9mq 13 дней назад
I've got one it's about 7 months old and the battery is leaking and it won't charge
@Sunshone7311
@Sunshone7311 13 дней назад
Call them, they’ll replace it.
@My-shampoo
@My-shampoo 15 дней назад
I know I’m late to the vid but how fast does it go with the new motor?
@Sunshone7311
@Sunshone7311 12 дней назад
I weigh 225 and it goes about 39.
@smshing_lee
@smshing_lee 15 дней назад
Cushions are needed but they are little stiff/thick. Bad supplier control.
@octagon_009
@octagon_009 16 дней назад
You made that look so easy 😂, ill be replacing these speakers soon. They dont even work any more. Perhaps its just the head unit that going. It deserves new speakers anyway. Cheers!
@Vidar93
@Vidar93 16 дней назад
I have used just about every tool brand under the sun and have found great ryobi tools and terrible Milwaukee or DeWalt tools. I personally think that dewalt makes the best benchtop plane you can get for the price and even more so if you swap the head for a helix cutting head. But as far as cordless powertools I have seen and personally had more issues with dewalt than any other brand..
@coloradomountainman8659
@coloradomountainman8659 16 дней назад
Have gotten rid of almost all my DeWalt tools. Been highly satisfied with Milwaukee quality and their huge selection of tools.
@quantumfoam2843
@quantumfoam2843 16 дней назад
DeWalt is terrible. Milwaukee is the way to go.
@nolsyAU
@nolsyAU 10 дней назад
the latest gen milwaukee impacts have plenty of their share of problems currently too
@cmdsandiego
@cmdsandiego 16 дней назад
Cushion pads to avoid vibration break the plastic cover. Maybe you removed the cracking noise but later you will find a crack in the cover
@rileyjohnson1032
@rileyjohnson1032 16 дней назад
He knew it was a cushion pad, I don’t know why people have so much faith in the manufacture like they never mess up
@Sunshone7311
@Sunshone7311 16 дней назад
The cushion is against the wire harness, not the motor. The motor doesn’t move in the casing. There is no contact on the harness, I’m not concerned.
@1891kmk
@1891kmk 13 дней назад
@@rileyjohnson1032o idk maybe because they engineered the product genius
@andresmith8739
@andresmith8739 5 дней назад
@@1891kmkthe same engineer that forgot to put a screw where this issue is? Every other dewalt drill has a screw in this location
@Sunshone7311
@Sunshone7311 17 дней назад
I have a follow up fix to the issue. Check my videos, it’s a short
@victorfeliciano6094
@victorfeliciano6094 19 дней назад
over all what is yr best pick?
@Sunshone7311
@Sunshone7311 18 дней назад
For the price and quality, Milwaukee when it’s on sale. The Dewalt does feel beefier, time will tell. I hope they bring the price down.
@KeepitReal-wn4zj
@KeepitReal-wn4zj 19 дней назад
Great video, what program are you using that shows the schematics?
@Sunshone7311
@Sunshone7311 19 дней назад
Honda’s software, it’s expensive and a subscription.
@newtlab
@newtlab 22 дня назад
Большое спасибо что показали внутренности 👍👍👍👍
@michaeldominguez4912
@michaeldominguez4912 25 дней назад
My question concerning the feeler gauge movement in the rocker arm: how do you determine what is too loose if there is space for wiggle room anyway?
@e.miller8943
@e.miller8943 26 дней назад
AT 80,000 mile my 2015 Accord started leaking around the valve cover. I had to replace a sticking PCV valve which was causing the problem. When the PCV goes out pressure builds and causes the leak.
@kevinsteele8613
@kevinsteele8613 26 дней назад
They are expecting you to take it to the dealership and have it changed by them for $200
@senorpepper1
@senorpepper1 28 дней назад
I'm having issues with the dab radio signal which is apparently an issue with this model. Do you think it's possible to upgrade the antenna, maybe fit an external antenna in the slot on the side which would give the antenna some protection?
@ZeroFallout1
@ZeroFallout1 28 дней назад
My only gripe with the tool is its price. Yes, it's faster than than Milwaukee but not worth the price hike. I'll stick with my dcf 850.
@joshuawick5382
@joshuawick5382 29 дней назад
I noticed that you jacked your car up from the engine. That’s the proper way to do it! Also, I see that you use Honda genuine parts! That’s generally the most ideal way to do it!
@33kingmajor16
@33kingmajor16 29 дней назад
Heavier? It’s like 3 pounds ? 🐱
@Sunshone7311
@Sunshone7311 29 дней назад
When competing, you want to match or better your competition. It’s heavier and the balance is too heavy.
@Sunshone7311
@Sunshone7311 29 дней назад
*top heavy
@georgedavall9449
@georgedavall9449 29 дней назад
@ 07:56. While I applaud your ingenuity, and ideas, and think it might actually be a cool feature, but in the end, not easy to do, and not practical in the long run. Maybe You can come up with something, Patent it, and then make money off whomever brings it to the market? Hmmm… I like the newer style batteries, with the rubber moulding on them, but geesh DeWalt, would it kill ya to make a DAMN 4 segment, or even better, 5 segment battery check!?! The white lights are easy to see out in bright Sunlight, but the silly 3 segment is like DATED! Come on DeWalt !!!
@georgedavall9449
@georgedavall9449 29 дней назад
Return it, Simple as that, but good luck dealing with Acme!
@stretch8390
@stretch8390 Месяц назад
Hmmm, seems like a pretty huge job. Thanks for being the guinea pig for us.
@deluxepressure
@deluxepressure Месяц назад
A lot of bitching and moaning need more lights more light, oh batteries so heavy. But I need more power. I’m not even a Dewalt fan if it was made in America, it would’ve been even more expensive because somebody has to pay for employee insurance! That’s why I stick with my Milwaukee, precise and compact
@THEBEARDEDTOOLGUY
@THEBEARDEDTOOLGUY Месяц назад
The battery with a Base LIGHT NICE
@MrBostonBilly
@MrBostonBilly Месяц назад
If it's got a defect take it back get another, mine was fine and works fabulous getting another for the shop
@Sunshone7311
@Sunshone7311 Месяц назад
@@MrBostonBilly I don’t give a passes, Dewalt needs to tighten their QC.
@georgedavall9449
@georgedavall9449 29 дней назад
I agree, but I will say, good luck with returning anything to Acme Tools! They tried to fark me over one time, and that’s all it takes for me. And I will add, while I am glad to see tools made In ( other than China ) I have had QC issues with ones Made in Mexico. Not all, and I am not knocking Mexico, just speaking from experience.
@georgedavall9449
@georgedavall9449 29 дней назад
@@Sunshone7311 This may be true, but they wont know if people don't offer feedback, or send the stuff back?
@marcusmorgan6820
@marcusmorgan6820 27 дней назад
I've bought 3 of these and they've all had that gap in the handle, casting..
@THEBEARDEDTOOLGUY
@THEBEARDEDTOOLGUY Месяц назад
Mine was great did a live UNBOXING with it and i THINKING about Turning it into a 3/8 ANVIL in and getting another one just have to do my RESEARCH i get BORED FAST and it has CO$T me about $10.000 in Cordless power tools and OPE
@minhdaubu2363
@minhdaubu2363 Месяц назад
A lot of people say It tends to automatically switch to lower speed mid way when driving large fastener. Can you test to see if it does that?
@Sunshone7311
@Sunshone7311 Месяц назад
Will do
@THEBEARDEDTOOLGUY
@THEBEARDEDTOOLGUY Месяц назад
It down shifts into 2 speed but only under HEAVY LOAD I don't like the HEAT the 860 puts out when you really work it Hard
@minhdaubu2363
@minhdaubu2363 Месяц назад
@@THEBEARDEDTOOLGUY if the that’s not in the spec and not intended by Dewalt then that’s defect.
@gdu370
@gdu370 Месяц назад
tighten the screws
@Sunshone7311
@Sunshone7311 Месяц назад
Screws are tight, it’s a casting issue.
@slingin_tires
@slingin_tires Месяц назад
That doesn't qualify as a defect
@Sunshone7311
@Sunshone7311 Месяц назад
Name me one Dewalt tool that does that. I’ve never seen it and it’s most certainly a manufacturing defect.
@slingin_tires
@slingin_tires Месяц назад
@@Sunshone7311 I mean it certainly doesn't affect the performance at all
@Sunshone7311
@Sunshone7311 Месяц назад
@@slingin_tires ​​⁠It’s a $200 tool, this isn’t from Harbor Freight. You pay more so you don’t get things like this. I would like Dewalt to see this video.
@andresmith8739
@andresmith8739 5 дней назад
@@slingin_tiresevery other dewalt drill has a screw where this gap is
@nickp3270
@nickp3270 Месяц назад
mine came out of the box with the gap too!!! im so glad it wasnt just me lol its been driving me crazy
@Sunshone7311
@Sunshone7311 Месяц назад
@@nickp3270 Glad to hear he wasn’t just me. It’s not right and Dewalt should recall them.
@nickp3270
@nickp3270 Месяц назад
​@@Sunshone7311 agreed obviously im not glad yours was messed up lol i just thought i got the only one like that also they should have put a specialized mode like dewalts precision mode on this impact because its impossible to use on any delicate work the milwaukee is able to do delicate work with the trigger alone
@Sunshone7311
@Sunshone7311 Месяц назад
@@nickp3270 I had a typo in my reply, hope that didn’t come off wrong, lol. “He” should have been “glad to hear “it” wasn’t just me.”
@thehegt
@thehegt Месяц назад
Hi , may i know how much is the brakes and rotors cost to complete the job
@JasPlun
@JasPlun Месяц назад
I prefer Honda GX 200 engines I am not a fan of the Predator just my personal preference. I have an older Kawasaki FR 691V on my older mower. I have been tempted to try and put it on a Mini-Bike ha ha! I am afraid it will stick out the sides too much though.
@mtso1122
@mtso1122 Месяц назад
May I know how to identify the common wire?
@jdreynolds29
@jdreynolds29 Месяц назад
Thanks for the walkthrough , full of valuable information
@leonardchizoba389
@leonardchizoba389 Месяц назад
How much can one get these cars now?
@Legalize_Meth
@Legalize_Meth Месяц назад
You should see the Cummins oil filter it’s in an even worse location
@bowwow7505
@bowwow7505 Месяц назад
TY, who knew? Not me
@fatmirsejdini5992
@fatmirsejdini5992 Месяц назад
What a tiny oil filter. I remember them being bigger on the 3rd gen
@cindel8486
@cindel8486 2 месяца назад
My Goodman doesn’t have a capacitor connected to the blower, should I be concerned or is that typical normal? So far I haven’t noticed anything else with my unit.
@lylereinier4989
@lylereinier4989 2 месяца назад
For gods sake people. If you take your time and give the filter time to drain bit by bit as you remove it! You don’t get oil all over the place or on any part of the truck. As for the sway bar or cross member big deal, it cleans right off.
@Thuglyfee_
@Thuglyfee_ 2 месяца назад
My 2015 Honda accord exl was totaled & fixed almost back to new. I don’t have the intake resonator on due to reconstruction. It can’t fit now. Is my car still fine to drive? The air box filter is on but the circle part is open. Do I need to close it? Also I can’t find the name of the ac line with the blue cap.
@georgemariahogan2693
@georgemariahogan2693 2 месяца назад
I totally agree with you. This is the absolutely worse vehicle to change oil in I have ever had. Just did it yesterday 2019 Ram Longhorn 1500. I did manage to fill the filter up with oil and get it back up there without spilling it but it sure sucks to take it off. Thank you for the video and your patience. Take care and enjoy your Ram
@jayvlog9841
@jayvlog9841 2 месяца назад
where u gona rising mount
@BP8599
@BP8599 2 месяца назад
Great video. Very well done and thoroughly helpful. Thank you.