Just a question - why would you use an impact driver to drill a lock? Wouldn't a drill be a better choice? I would think that the impact driver would ruin your drill bits.
Yep, I recently learned that FUEL really just means it can squeeze out some extra power if you're using high output batteries. Which is cool, but if I'm ever using a power tool at its maximum power for an extended period I'm probably using the wrong tool hahahaha
I can think of several "outdoor" uses for a level. If you're trying to build any large structure like a cabin or fence it would certainly come in handy for setting posts. It's also good for getting frying pans level so your food doesn't slide to one side while it cooks. That's not to say this is a prepping video at all- its not. Just EDC
It largely depends on what I'm doing. It's easy to clip the whole thing onto my toolbag, nearby cabinet handles, water lines, or closet shelves if I don't want it on my belt. I like that because I can almost always clip it somewhere in arms reach while I'm working, and then I have a mobile tool setup that isn't on my belt at all if I'm on my back or working in a tight space. I personally don't like tool pouches because they're bulky and if I need to run during an emergency all my tools fall out
It's funny you say that- it's actually smaller length×width than my previous wallet which was just a traditional leather flip open wallet. As far as weight, it weighs about as much as my phone. It's not as bulky as you'd think, but the thing still feels like a little brick in the hand hahaha. Could probably knock someone out with my wallet 😆
If you only have a "plan" to make a tension wrench that means you've never made one. Which means you've never used your lockpicking tools (I didn't see a rake or comb tool) and that whole use case is rather theoretical. Don't get me wrong, its a good idea, but its not really EDC if there's no "every day" element to a very occasional use.
Lock picking is a hobby of mine and I'm in no way claiming to be a locksmith. That being said, I've experimented with different makeshift tension wrenches and have found that bobby pins are far superior to paperclips in shape and strength, and have successfully picked my front door multiple times with a bobby pin without trouble. Also I feel like I'm playing a Fallout game with the bobby pin which adds to the cool factor. The rakes and combs are inside the victorinox swisscard where the nail file typically goes, which I explained in the video. I have a seperate set that I use for practice and work. The everyday part of the lockpicks is primarily the peace of mind it brings everyday. If someone loses their keys I'll be able to save them or myself some money and a ruined day waiting for a locksmith to show up. I'm really bad about forgetting things, so losing my keys or locking them inside my house is a constant fear thats alleviated by a bobby pin and some rakes, so that's why they stay in the wallet. Its the same with firearms to a more extreme degree. People don't carry them everyday to use them everyday- its just for peace of mind's sake.
Not trying to be mean, but know your shit. The heavy duty clip on your flashlight is to also clip it to your ballcap visor. And the little square thingy in your Victorinox card is screwdrivers….otherwise the rest of it was pretty cool.
I know, but I cant imagine a universe where a screwdriver that small will ever be useful to me personally. I cant think of anything to replace it with (yet) so it lives on in my wallet. As for the pocket clip the reversable clip for my hat is a necessity- the flashlight in the mouth technique gets old and isn't the most sanitary hahaha. Glad you liked the video, and thanks for the comment
Thanks! There's honestly too many good small edc flashlights on the market right now to name them all. Try to narrow it down to what would work best for you by asking yourself things like "Do I care about strobe mode? Do I need a reversable pocket clip? How many lumens? Does beam pattern and CRI matter to me? Is shape important?" Personally, I would look into 14500 battery (AA size) flashlights or try the new streamlight wedge style flashlight that've been a recent trend if you're carrying it in a pocket. r/flashlight on Reddit is a really awesome resource that can help you narrow down the options too. I will say the wurrkos ts10 was so much fun to play with and its hilarious how bright the little thing gets. Not for everybody though
@@user-wd4ge2zh2c thanks for the suggestion got a rovyvon a1 I believe in purple for 22 bucks I think killer lil light meets my specs except the battery thing but that's ok.
I've been using it as my main drill since this video and it's still like new. Personally I find I like having only one speed, but I do have one gripe. It doesn't have the quick connect like the fuel models do where bits slide in without pulling up on the collet, so interchanging bits can be a little slow. It has a ton of torque for its size
@@wookiescookies Ive had mine a month. I have the Gen 2 & 3 M12 Fuel and the Gen 4 M18 Fuel. The compact brushless is my favorite of them all. I prefer the single speed simplicity as well, and even the traditional collet hasnt really been enough to be a dealbreaker for me. You can get a quick insert/ejecting bit holder if it means a lot to you, btw. But only question left for me is how well it’ll hold up compared to the fuels. I’m not that tough on my tools (residential and commercial mover) but I don’t baby them either, sounds like yours is holding up well!
it looks like there's strings on the things that hold your bits on the keychain setup. what is that part called and is it on amazon? I've seen the keychain bit holders, but not in that style with the string
Initially had regular key rings that came with the bit holders, but I wanted to keep the weight and jangling to a minimum. I ended up replacing them with replacement zipper pull strings. If you look up zipper pull replacement you can find them on amazon in a 5 pack for $12. Look for the ones with the hole in the rubber tab- that way you can attach as many bit holders as you like to a single big key ring. Keeps it a little less noisy
@@wookiescookies oh cool. thanks for the reply and congrats on making the jump over 500 subs since that was the gaol at the point of filming this vid. you should look into setting up an amazon affiliates account and posting links on your old videos. I've heard it adds up pretty well over time. I'm watching one of your newer videos right now and adding some stuff to my wish list
You'll wish you had that crunch on you if you run into a really tight bolt. Needle nose pliers aren't good on tight bolts. I tried to no avail to loosen a rusted bolt on my old bike using needle nose multitool pliers. Now I'm going to change my mutitool EDC to Victorinox Swiss Champ and Knipex Cobra pliers, or 4 inch vise grip pliers from Amazon. 😁 I wish more companies made vise grip / clamp plier multitools! They're so much better than needle nose pliers.
Very nice setup 👍 alot of stuff. I have a pouch I carry also in my pocket about the size of a wallet but I still carry a dedicated wallet too 😔 I need to work on it and try to combine them. Thanks for sharing!
To me, upgrading and modifying an EDC setup is the half the fun as you figure out what tools you like, better ways to organize or fit things into a space, or changing out tools for better ones. I like the modified swiss card. Gives me an idea to try and fit some leather stitching needles into a SAK in place of the toothpicks
Good question and thank you for the comment. The purdy painters tool has a metal striker on the bottom and that covers most of my needs day to day- it's taken a lot more abuse since I filmed this and is still holding up well. I have some additional tools in my tool box on my golf cart that come in handy and those include a 16 ounce hammer, a dead blow for vinyl, little sledge hammer (the pursuader), clamps, bolt cutters, pry bar, vice grips, various channel locks, and the list goes on hahaha. Typically I only need to grab one of those tools once a month or so, and storing them on my golf cart keeps the bag light.
It's a good bag that hasn't sustained any damage over my two years of ownership. Zippers still work like new and the handle is sturdy and comfortable. Tons of good sized pouches (many of which I don't use) so you can load it up with a ton of tools if that's what you're after. I really only have one complaint- I don't use the side straps so they can sometimes get in the way when trying to lock the organizer to the bottom of the bag, but if you intend to use them for a level or something that wouldn't be an issue. In fact I may just cut them off entirely. I do have my eyes on that new 15" structured tote bag, and if I end up buying that I'll make a comparisson video. I wouldn't recommend the packout backpack to anyone because it's pretty unstable and can be frustrating to deal with on a regular basis, so I've converted mine into an emergency "go bag" with extra tools and towels that might come in handy in emergencies like a water or gas leak.
Good afternoon, and of course! I do general apartment maintenance, but I'm exploring other trades as my career progresses and always looking for opportunities. I'm sure that explains the variety of tools I carry- For my property I'm the plumber, electrician, HVAC guy, appliance installer, painter... and the list goes on. Which I think makes all of these tools pretty useful for home owners. Apartment maintenance has a lot of drawbacks, so I'm looking into HVAC or something more niche and higher paying like power plant maintenance. Thank you for the comment!
Solid breakdown of your carries, mate! I especially love your keychain razor/prybar solution🤣 I felt that. Ive got something you might be interested in reviewing. How can I get in touch with you?
