Hey man, what about Terriermon Assistant? Has the same Alliance digivolve inherit, and gives something +4k! Do you find that extra 4k just isn't really needed?
Probably better off with the terrier ex6 search and inherit of alliance. Dp isn’t really needed could be good for your lvl 4s if you are wanting to swing with them
I love how every toxic fan told me they created magnax to counter aggro decks like miragegaoga but this video literrally explains that the only decks that can beat magna are the same aggro decks like mirage and anything with dp reductions which is already good even if magna did not exist! Maybe they can use the banlist to balance decks instead of making broken cards that hurt the game more than help it since most decks can't naturally out magnax!
EX06 Lopmon isn't good at all, pay 3 (or using it with double typhoon) is not worth for just a draw, is better to run the ex4 terrier, you get extra search for 2 cards and also have the inhe of evo by alliance. I don't know how it works for you only running 4 lv4 with alliance, for me I needed to cut at all the ex6 turuiemon and put the ex4 turuie to get more alliance on low levels. The Wendigo is really good to do more search or remove floodgates. And as suggestion, because is what I see most of the times in my locals, against magna giant missile is way better, mostly because you want to see it on your security. Heavens judgement don't anything to magna if is on sec.
EX6 Lopmon is good for triggering EX6 Shu. Play it for three, play it off of an effect, and suspend itself to go up the line. It’s more situational but it’s a give and take. Sometimes you won’t be able to Alliance and getting “an effect that suspends one of your Digimon” would be better with EX6 Lopmon. I do get where you’re coming from. It can feel underwhelming and like a brick at times. I’ve been enjoying it at 2 in my list. I like EX4 Terriermon, but whiffing on tamers hurts. (I’m running four EX6 Shu-Wong and two BT1 Mimi.) At the end of the day, I’m glad the deck has enough support for various builds now. I’m running some Panjyamon for instance.
Running more St17 Lopmon means more Alliance stacks. And each use of Alliance activates the ex4 effect to digivolve because it isn't once per turn. Really helps accel your towers and greatly hit Sec
If I'm not mistaken, playing out the ACE ragna out from under something with the delay from the new Legends Arms option, would *NOT* trigger Overflow. At no point does the piece with overflow leave zone to my knowledge, since the delay is a replacement "if xxx WOULD happen, do this instead", and digimon doesn't really use something like the stack in Magic the Gathering, it seems like overflow shouldn't be an issue here
@@SpideyPlaysTCG I'm so happy to see legend arms getting real support :') I started the game this past year with the failure that was the starter deck and have been waiting for ex6 so long. I just want to make sure to squeeze every last bit of power and value possible out of what it has now lmao
@@SpideyPlaysTCG also i think you have a point on the counter. I have searched and can't find a ruling so far saying that it NEEDS to blast dna with one of the cards in hand. It's less likely to ever come up but would be nice to know if you can do it normal with both megas on the board and the enemy for some reason swinging into that. Keep me posted if you hear anything on it!
This is correct. I want to add to this a little bit. -Overflow will not activate so long as the card with Overflow is either in the battle area, or underneath any other card. If it moves from under a card to the battle area, or vice versa, Overflow will not trigger because those spaces are considered "safe". Underneath a card can be either a Digimons sources, a Tamers sources, or even an in-raising Digimons sources. So, in this case of Ragna Ace being tucked underneath a body and then played back out with the Options Delay effect, Overflow will not activate, as Ragna Ace never left the safe spaces where Overflow doesn't trigger. -In the future we are getting an Omnimon Ace that could be run in the Royal Knights deck. There are some interesting interactions here. If you play Omnimon Ace and then it gets sucked underneath Yggdrasil BT13 in raising, Overflow will not trigger because it was moved underneath another card which is a safe zone for it. Now, if that Omni goes to trash after popping Yggdrasil, or somehow another interaction sends it from your in-raising sources to anywhere else besides in play or under another card, Overflow will then trigger. -If your Digimon in raising is an Ace/Overflow Digimon, and it somehow leaves raising and goes to hand, trash, deck or security, Overflow will not trigger. This is because the card was never in play, therefore Overflow was never "turned on". However, if the Overflow card is in the sources of the in-raising Digimon and then goes to any of those other places, it will trigger Overflow because it moved from underneath a card to one of the non protected spaces.
Overflow: as this card moves from the battle area or under a card to another area, lose x memory. Overflow will not trigger if ragnaloardmon is played from underneath a source because it started in the battle area and ended in the battle area.
To answer your question, the way the card is worded you have to have one on the board, say Durandamon, and one in hand being BryweLudramon. You have to use those two, and it has to be one on field one in hand. Otherwise, you can regular DNA with both on field only during your turn. Hope this helps!
This is the type of deck that really benefits from the upcoming Gem Memory Boosts. Not being able to run either Training/Memory Boost reliably really hurts this deck.
I'm testing the deck in this days, mine plays 12 rookies (same as yours but x4 ludo bt3) i play only x3 ragna cause i bricked a lil too much when was 4 😢 X2 salvation cause you don't wanna see it at the start of the game and 1 laplace, also i play 1 emperor and x4 black memory boost. I'm still testing 🤔
Ragna was pretty good in bt3. Was tier 2 but could certainly beat tier 1 decks of the time. Searching wasn't very prevalent back then so it had that advantage. I ran red base with the rookies, LV6's & Ragna only. using the st greymon and LV 4 & 5's from the omni deck at the time for cheap evos. Good times.
@@ashesfall9530 really because you have plenty of ways to get raid and ragna has it itself. It is still a viable card since it can make your lower lvls gain raid without having to use hand effects. If i take option cards out ill probably put a copy of it in.
Cause trident arm ends your turn, and you wanna have the lv6 when the opponent must Attack, so the lv6 Evolution would probably be the last thing you do in the turn before you pass. At least this Is the reason why i play laplace's demon 😊
Awesome video! I think you may want to bump up the Ladydevimon BT-11 from 2 to 4 because you will trash your Lvl 5's often from demimeramon's draw effect.
what do you think of starter deck nyaromon? that way you can have access to BT16 salamon over the ST one. also i dont get why people play blackgatomon over the bt11 devimon it literally gets rush as well and is searchable since it is a fallen angel
The nyaro is good. The base is think you can play around with to fit your play style i just think with the amount of lvl 5s you run the demi is great to dig in deck. Lol you aren’t even lying devimon is probably the better option. Ill try that out. Id only say is that devimon has a requirement for you to be able to get rush.
@@SpideyPlaysTCG yea i definitely see the value in the bt15 demimera what with 14+ lvl5s and do true the devimon most of the time it summons off maste so it will always be live
My very first time playing Digimon was Sunday, there is a lot to take in with this game and I feel Imperialdramon is a very advanced deck to learn. I think if you had gained 3 memory and used Partition at @5:50 you probably had game that turn by using DNA and attack.
You should design these in multiple pieces per hex. There should be the "housing" with slots in them that allows you to slide in whatever condition or value you're wanting for that face of the hex. It will save you filament, there will not be a "bad" side of the hex either. Plus you can swap the faces to whatever you want them to be down the road or just glue them in if you like them as is.
As someone with a basic 3d printer still in the box, this has got me wanting to pop that bad boy open and get to printing cool stuff like this lol thanks dude
Welcome to 3D printing lol. Try insetting the numbers/numbers and printing them separate then pop them in. Make sure and test your tolerances so they will fit in the cut out in the block, it’s how I make mine. And also the sides are flat when you do that.
These are so nice! I first saw something like that in CardProtagonist's channel and thought they were a really nice way to keep track of DP bonuses, keywords, etc.