Тёмный
The Eclectic Mechanic
The Eclectic Mechanic
The Eclectic Mechanic
Подписаться 196
I am a mechanic who has a large amount of knowledge and hobbies that I wish to share with the world. If you like seeing how things get fixed or or want to know how to fix something, I might be able to help you out! If you are curious about how to fix or do something, even if it isn't on my channel, let me know in the comments of one of my videos! I would love to help you out and it just might be the inspiration for one of my up coming videos! Please subscribe and hit the little bell icon on the subscription box! See you in my next video!
Комментарии
@TITANONICEvibes
@TITANONICEvibes Месяц назад
Mine ran with jumper for year and half
@josejosejose33
@josejosejose33 Месяц назад
My symptoms on mine is that I charge the battery and a day later the battery dies..it doesn't hold a charge..everything is fine I even got it a new voltage regulator..
@paulmoritz2240
@paulmoritz2240 Месяц назад
May want to check the output voltage of the stator. (Test before the regulator) you’ll want between 30 and 50 volts.
@samsnephew3209
@samsnephew3209 2 месяца назад
"Any who", are you Canadian or Californian?
@noelbates9101
@noelbates9101 3 месяца назад
Stupid! Video on how to change brake pads…but it shows nothing. Just talks about it.
@paulmoritz2240
@paulmoritz2240 3 месяца назад
Perfect. Just the way I want. You will not in the video that I said… “it is just like changing the pads on your car and there’s plenty of videos on RU-vid on how to do that…” I saved me time. Now move along Karen.
@scottb.6888
@scottb.6888 5 месяцев назад
Looks like you gave some blood on this job!!!
@piotrnarowski5543
@piotrnarowski5543 7 месяцев назад
Rodak
@pauljay2305
@pauljay2305 Год назад
Was it the low or high pressure switch? I work on mostly indigo Manitowoc machines and I have a condenser fan motor short cycling
@paulmoritz2240
@paulmoritz2240 Год назад
I think it was a pressure switch, solely dedicated to the fan. Clicks it on at a certain pressure and off at another.
@Genervidious
@Genervidious Год назад
I know it's a long shot since the video is so old but I need some advice on my machine. It's the same unit. It powers up, runs water for a few mins then stops and the "Service Light" comes on. It doesn't seem like the evaporator is getting cold. I've cleaned the front filter and the coil. I'm not quite sure where to focus my attention. Any advice would be great.
@paulmoritz2240
@paulmoritz2240 Год назад
Sounds to me like you might have a refrigerant issue. You might be running low on refrigerant in the system if that is the case, your regular refrigeration company will be able to get that problem resolved for you. Basically any company that can service a walk-in refrigerator will be able to service this unit.
@M3TA1UPY0URA55
@M3TA1UPY0URA55 Год назад
I have the same gator and cannot find the damn voltage regulator. Does anyone know if it is hidden under the starter? It’s nowhere along the frame, hood or under the seats.
@Supanova70
@Supanova70 Год назад
On indigo ice machines the purple wires is for HPC not fan cycle.
@pauljay2305
@pauljay2305 Год назад
I have an indigo self contained unit with a short cycling condenser fan motor only not the compressor. So it’s the low pressure switch failing?
@danoverton4297
@danoverton4297 Год назад
Thanks for posting. I did not have to take the starter off for this, but I did drill some holes in the frame to take the bottom two screws of the cover out.
@AladinThSv
@AladinThSv Год назад
Next time would you please remove the music.. because people might want hear your voice more than the music And would be very good to have the microphone wireless ($20) at your ~neck You explain very good I'll say 10/10
@outdoororiginal4364
@outdoororiginal4364 Год назад
This video was made by another RU-vidr .. Paul Moritz. Not sure if you got his permission to use it but you may wanna make sure he is ok with it. Jus my opinion tho.
@Taronlusin
@Taronlusin Год назад
Thank you, I have a same problem.
@chocolatespecialist1
@chocolatespecialist1 Год назад
Just installed Sealight LEDs on my 04 Tribute. Pretty simple, only issue is my high beam light doesn’t come on my dash now. Not a big deal though
@jamessullivan9081
@jamessullivan9081 9 месяцев назад
Just bought the same brand…is it the H4 bulb for 04 tribute? I have an 04 tribute as well
@rauldarioruizcorrea576
@rauldarioruizcorrea576 Год назад
Gran ayuda
@jakereal3604
@jakereal3604 Год назад
That’s what I need on my Ebike here in NYC 👍🏼👍🏼 Lololol
@paulmoritz2240
@paulmoritz2240 Год назад
That I believe!
@speedtek808
@speedtek808 2 года назад
The reason the headlights don’t function properly is because the Mazda is common positive and switches ground. So you would have to make a relay harness to fix the problem. The signal from the fog lights is feeding back to the led bulbs.
@paulmoritz2240
@paulmoritz2240 2 года назад
Well, don’t have the car anymore so I don’t have to worry about it 😁
@kennethjohnson6248
@kennethjohnson6248 2 года назад
didnt show you compressing the piston
@paulmoritz2240
@paulmoritz2240 2 года назад
And? Pretty sure I said in the video that it is similar to working on vehicle disc brakes… so if you know how to work with car calipers…
@fahlvfaust677
@fahlvfaust677 2 года назад
Self healing?
@fahlvfaust677
@fahlvfaust677 2 года назад
Self healing?
@paulmoritz2240
@paulmoritz2240 2 года назад
They do take quite a pounding from arrows time in again. So, hard to say For sure
@michaeljenkins1324
@michaeljenkins1324 2 года назад
Can you please do a video of the installation of the interior led please
@paulmoritz2240
@paulmoritz2240 2 года назад
Unfortunately my dad no longer has the tribute.
@mos8541
@mos8541 2 года назад
those clips are horrible pieces of engineering,
@ricksebrell8094
@ricksebrell8094 3 года назад
I’m hearing squeaking when I’m driving slow,it stops when I touch the brakes,is this a brake pads problem?
@hanshoogendyk2203
@hanshoogendyk2203 3 года назад
Not much usefull info at really, was looking on how to fit rear pads And piston retracting, but in the end Nada
@paulmoritz2240
@paulmoritz2240 3 года назад
Use a c-clamp to compress the pistons in. In regards to the pad fitment, I figured with the bolt holes that would be pretty obvious. Not really a useful comment. I was looking for better questions and I kinder approach but in the end… nada.
@prestonthomas1256
@prestonthomas1256 3 года назад
Where do the clips go ?
@theeclecticmechanic4810
@theeclecticmechanic4810 3 года назад
I don’t remember if this gator had any clips for the pads.
@JD-ml7cg
@JD-ml7cg 3 года назад
Any negatives since the upgrade?
@tylerlarson5205
@tylerlarson5205 3 года назад
Do you know the part number
@theeclecticmechanic4810
@theeclecticmechanic4810 3 года назад
I don’t, but the link to the bulbs I used is in the description of the video.
@downtownwhiting4498
@downtownwhiting4498 3 года назад
Great advice
@BradHudsonhudson
@BradHudsonhudson 3 года назад
What symptoms was your gator having with the old stator? I have a tx turf gator that's giving me issues I've tried just about everything. The gator runs fine cold when it warms up you hit throttle and it's dies like its out of gas runs good full throttle. Things I've done new coil , new carb new fuel pump new gas lines new starter solenoid new pedal switch, adjusted cables new filters. Any idea what's going on?
@theeclecticmechanic4810
@theeclecticmechanic4810 3 года назад
You know this gator did that to me too. Idk what it was, but I know that sometimes if you just give it a quick choke when you hit the gas it revs right up to speed. You might need a new carb. Start with putting some seafoam in the gas tank.
@leroywarren9175
@leroywarren9175 3 года назад
How do you bleed the breaks after replacing calipers and replacing the breaks?
@paulmoritz2240
@paulmoritz2240 3 года назад
I blew there are little bleed nipples on the calipers that you can loosen. If you loosen those I believe that opens them and allows you to pump the breaks and bleed them.
@muhammadadnan5338
@muhammadadnan5338 4 года назад
Sir. Please i need to help. I have icetro ice making machine. Power on frist start pump on 3minut after water pump stop. Compressor and condenssor fan not working. What is the problem . Pls explanation thanks
@theeclecticmechanic4810
@theeclecticmechanic4810 4 года назад
Davoodadnan Davood your cooling system is dead and as a result your ice machine is dead. Probably not what you want to hear but that is not worth the time or money to repair.
@flattrain5834
@flattrain5834 4 года назад
When is somebody going to put a real horn on their bike
@theeclecticmechanic4810
@theeclecticmechanic4810 4 года назад
Flat Train I actually did put a P1 and 2 bell on the same bike once upon a time. Also if you search for Nathan air chime on a bicycle, there is a guy who did put a k3 on a bike. Complete with engine and air compressor.
@flattrain5834
@flattrain5834 4 года назад
Yeah, I saw the k3 one. I’m talking about a bicycle, not a motorbike. I’m putting a p3 on mine soon
@moto-rambler
@moto-rambler 5 лет назад
Thanks for the Gator videos -- keep 'em coming! What were the symptoms that lead you to replace the stator?
@theeclecticmechanic4810
@theeclecticmechanic4810 5 лет назад
motorambler hey there! I appreciate it! I wish I still had access to said gator to do more videos with. Basically the battery was not being charged by the engine and the engine would run but the battery would not start it. The headlights were dark even with the engine running. Basically behaving similar to a bad alternator on a car.
@compoundbowpro8175
@compoundbowpro8175 5 лет назад
Great looking content. Presume you did a lot of your very own video coding.
@theeclecticmechanic4810
@theeclecticmechanic4810 5 лет назад
compoundbowpro I actually didn’t do anything fancy at all. I just used my phone as my camera and the basic iPhone iMovie app to put all of my videos together. Thank you so much for the compliment!
@openedmind5619
@openedmind5619 5 лет назад
Will it work with flexvolts?
@theeclecticmechanic4810
@theeclecticmechanic4810 5 лет назад
Opened Mind I have not used the flex volt system myself but if they fit like The 20 V batteries and go down to 20 V then yes they should.