yes it does or should, its a global chipset

for just load balancing you could get something as simple as a B One if you have a small office or as big as an SDX if you have hundreds of users. Routers are scaled based on stateful throughput, bonding throughput, and number of users. Then you would want to think about number of WANs and if you want 1 or more 5G.

Its a bigger topic on which features you use, but I think it can. I'm biased toward Peplink in so many ways though.

Technically traded with cash on top

I would say that all three carriers covers 90+% of the country. Starlink would add the other 10%. Single carrier would not cover 90%.

any luck?

@@brandonfrancken5955 yes, lol, was frustrating af, but eventually figured it out... 4090 can only push 4 monitors @4K/120Hz... but the samsung has a game mode that needs to be turned off for the monitors to drop the framerate, once that is done it works like a charm giggled like a little school girl when i finally got my sim running on trip 55'', it is awesome

go to set Game Mode: OFF

@@jscockpit lol cheers, yeah figured it out eventually thanks

@@jscockpit you should post some game play please

It's best to tether another device like a cell phone or max adapter or send them a br1 and wire it in

Most Wi-Fi mesh solutions, support bridge mode and so basically it treats it like a wireless access point off of your router I know for a fact the orbu products do So a lot of times when I'm running with mesh networks for installs, I'll set up the peplink router as the controller of the network put the mesh in a bridge mode and connect it into the peplink routers lan port that will allow you to extend your wireless network and keep your mesh while having all the benefits of a peplink router

The most powerful antenna for bad coverage areas in my opinion is the Maritime. 40g I know it sounds crazy, but it's built for boats and is incredibly powerful. You could use extension cables to get the antenna out of your building. It's pretty pricey but it is by far the best antenna. The other option would be the mobility 42g which I recommend over the mobility. 40g if you're in a bad coverage area, it's much less than Maritime. 40g but it depends on your coverage area and if you can get these antennas outside and mounted to your the wall of your building. The other option would be a directional antenna aiming towards a cell tower like the iot 20g and there are other brands that make really good directional antennas.

Thanks for sharing

Thanks we like it too

🙏

There are lots of differences mostly in the ecosystem and bonding. Peplink has 18 years of bonding experience making them one of the 4Runners in the technology. Outside of amazing technology, we also have a very robust ecosystem that covers Enterprise infrastructure access points, switches and cellular devices and the cellular vices have one, two, four and up to 12 5G modems creating the most robust, reliable internet possible. Additionally, our in control cloud management platform is incredibly user-friendly and does not require a partner or cradle point to add and remove devices or manage your infrastructure. All of our products are perpetual in licensing, which means they will work forever and you can download firmware forever for the life of the product. If you do not choose to pay for a warrantee for a peplink device, you simply lose access to the cloud management platform, but you can still manage the devices locally, configure them locally and have full use of most of the features and capabilities.

We do signal telematics accessible in InControl2. I have a training video for InControl2.12 available

Never

If you click on the wan that you're using for the starlink then scroll down to the bottom and you'll see the health check settings Each wan can have its own individual health check options

Sorry trying to fit a lot of content in a short amount of time, I'll try to slow down next time

There is 0 chance we would ever install a mikrotik on an enterprise or business network.

@@WestNetworksLLC You have to be more open minded on other brands other than yours.... Mikrotik routers are beasts and they are used by many ISPs and in corporate networks.

I evaluate almost every brand and try to be as agnostic as possible when making judgment, that being said, I find them to be absolute jokes of a device. I respect many brands but that particular brand in my opinion is cheap garbage. I respect anyone that wants to use whatever they want to use and don't judge but there is zero chance that I would recommend Mikrotik for any of my customers ever. I take pride in evaluations of different brands and products as well as respecting each product for its capabilities and usefulness. Even though we mostly sell peplink, it's fun to look at other products and see how good they are, as well as where they fit well in certain networks. Mikrotik it's cheap garbage with no Enterprise support and is used for cheap unsupported deployments.

Why?

Yes if you synergized another peplink device to the Dome like an older one, it would become part of the Dome and therefore the Sim injector on the lan would be able to provide it sim cards. It's important for peplink to share interface performance specs, but that is why we have router performance specs as well. That being said, the router performance specs are based on standardized testing, we have seen scenarios where the peplink can perform better or worse than the stated spec under unique situations. I had a customer one time push 900 MB per second over an mbx with speedfusion but it's only stated or rated for 500 megabits per second.

Glad you enjoyed it

Ip pass-through which allows the first DHCP client to receive the public IP or CGNatted IP from the cellular is available on the b15g

So the funny thing is ipsec will not work over starlink however, if you bond it using speed fusion then you can run your ipsec if you need to inside the speed fusion tunnel. Peplink sd-wan supports starlink and works very well, especially if you enable FEC has a means of mitigating packet loss.

@@WestNetworksLLC Thank you Peter!

There's technically no limit with the exception that you have to have an available WAN port and active care plan

Thank you! You can find good options on Amazon. "Aluminum Heat Sink 150mmx93mmx15mm/ 5.9x3.66x0.59"

No software, just a Windows PC and using Nvidia spanning

Are you in a static or mobile application?

@@_cashflo_empire2523 Mobile but not in motion the campground we take our 5th wheel to has bas reception. If we use our omni we get great upload but horrendous download. If we hook up our poynting directional and point at any one of the towers we get good download but really bad upload

No, you would not want to mix directional and omnidirectional on a 4x4 mimo connection. You would want all of them to be directional or all of them to be omnidirectional.

Thank you! Yes, in this particular case it would be better to replace due to the overall power of the B1 5G over the 20X.

There is more throughut on the ne B one 5g/ B One and an additional physical Wan port.

Yes, we run them all in 4k with the 4080 and 4090 testing

I know this is heavily late but at the wan is failing PING test then I would check to make sure The starlink is active and potentially the DNS servers are accessible. This is a pretty standard Health check mechanism which works really well for starlink

APs are not worth it

The peplink ap one ax is a great way to extend Wi-Fi 6 connectivity. I use them in my house, at my office and at many other businesses around the country.

It's the ping pong conference table from upliftesk.com

Honestly we let Nvidia make that decision so those are just stock options It was sort of a nightmare to get set up cuz the screens kept going into their smart mode. But once we got them into HDMI and we're able to create the content we were so happy it was there. We just left it. The screens are huge so after we created the video we just split it up into three individual screens and gave them to employees.

We've connected 20 plus starlink terminals before with the 2500 EC and epx routers

That might work but not really the purpose of the video

Happy to help!

Glad it was helpful!

Unfortunately, it's already taken apart so we wouldn't be able to answer that with a measuring tape. However, I guess you could do the math

I know that's a popular game. One of my friends loves that game and has been playing it for a long time. Maybe the next video series will try to do Star citizen a few extra games.