TRS rail will not due to the top rail having a different mounting system. All barrel kits and liners will function the same as they did in the M3, so they will all work! We have not tried the bag rider yet but will shortly
Ok got it. There are two different transparent covers for the magazine in the package, both with different heights... One is way too high for unknown reason
The thicker one is for the Panthera / Dynamic / King platform. The purpose is they allow more space for bigger slugs with using the same style magazine. Glad you got it figured out though!
Nice video. I put a set of FX rings on my CZ 457 Synthetic .22. When i used regular mounts, I couldn't adjust the POI of my bullets upward onto the bullseye. At first, I cut some shims out of a coke bottle for my rear mount ring and that got me on the bullseye. But i didn't like it. So I put on a pair of FX No Limit rings. Worked like a charm on my CZ, so I figured i'd put a pair on my Ruger American .22 rifle. Encountered a problem, the top of the Ruger's barrel is not flat like that of the CZ. No way I could get the FX rings, with their flat bottoms, to grasp the Ruger's 3/8 rounded dovetail. So, I took a round bastard file and carefully filed a rounded area into the surface of the bottom of each FX mount. After doing that, the FX rings mounted on the Ruger with no problem. Later I learned that a 11 mm dovetail on a rifle is flat, while a 3/8 dovetail is rounded. I used a spark plug feeler gauge to set up my FX mounts. Both rifles are tack drivers - now.
Not very often do I thank God for the Internet 🤣 Got a new bottle adapter for my Maverick from you guys. Not only did the Belleville springs fall all over the place, but it’s impossible to see that “block o-ring” in there. Got everything back together meticulously aligned greased and perfectly… except that o-ring! PPSSSSSSSSSSS!!! I have o-rings but they aren’t individually labeled, so no idea what size to look for! Had to get it out of the old bottle adapter to see. What a PITA!!! Amazing after angrily stabbing around in there for 15 minutes trying to get it picked out, I hadn’t chewed it all up! 😂 Probably could re-use it if I had to. DO NOT START THIS PROJECT without some good hooked picks… Just don’t do it! You’ll be sorry.
I lay back on my bed hold the rifle up in my hands so that it makes it easy to reach inside the regulator slot/reciever then take a brass safety pin to take out the O ring in the reciever.
I have bought the mount and I can’t get a clear video. Now I know it’s because of lens , so I have to modify it. What a crazy thing, the mount is not cheap. Where can I get the 12mm lens? Anybody can help me.
fx impact my one kidney maybe I won't even pay the entrance fee to Brazil lol I'm just saying much success to everyone, a card-carrying fan and I'm happy for everyone
I also sent them a note .. At this prioce it should be included . The instructions also on the Amp Regulator bear no relation to whats on the gun . There is no knob over the bottle attachment.Setting the Macro Power adjuster etc is also a bit weird as mine came from the factory set at 16 ?? Just give us a simple setting for best accuracy with a named pellet and that will do me
My Mk2 just threw a fit and dumped all its air at my face... stripped but cant find the culprit, as fast as I fill with air, it comes out the barrel port.. any ideas?
This couldn’t be more timely. I have these in my cart. What the symptoms are of needing to check them would be helpful. TedsHoldover suggested it might be causing a problem I was having with maintaining a zero issue.
I own a Benjamin Marauder semi auto airgun. The manual shows how to de-cock the gun by pulling back the charging handle while pulling the trigger. But, the manual doesn’t explain how to re-cock the gun. How do I re-cock the gun?
I’m not sure I understand. I was going to buy FX Impact Mark 3 but it’s really expensive in Canada. I found a really good deal on a Mk2. I’m not clear on a few things. Does the Mk2 come with dual regulators from the factory like the MK3 or do you have to upgrade it? Does the addition of a power plenum 720 cc produce more consistent shots and more shots or does it have to be in conjunction with a dual regulator?
Could you do a video or explain the differences between the standard smooth twist x liner, superior x liner, slug liner and the heavy liner? And when you need to use them? I cant find any information on this so i would appreciate some help please. 🙏 Thank you
Something is wrong unless you are shooting an extremely poor (ballistics wise) bullet very far in a storm. Check that the scope is level with the gun/rail.
