My high flow probe does not clear all the way and it is align like you said. WHAT SHOULD I DO? Align the probe looking at the hole or make the probe flush. I install a .22 cal liner with the dual port from huma and with 150 bars with the 34 grain slugs I couldn't get to 950fps which is weird because this gun with the .30 cal barrel do 1000fps with 140 to 145 bars in the rear reg with 44 grain jsb.
Your barrel is sitting too deep if you can't get a mag in. Take out your barrel, put in the mag, and reseat your barrel. Test your magazine movement and tighten. You should be good to go.
@@nategoodwin3329 thanks, that was exactly the issue. But I created a bigger issue. I found the bolt that tightens the barrel and set it right. That particular bolt doesn’t have a wider head so I kept tightening it until it damaged the bullet probe underneath it, now I have to replace it.