Hey, Mr. Dado! Great job on the app! Great stuff! Can you tell if you or someone else on the community is working on a standalone Watch version for the Android ecosystem (Galaxy Watch, Wear OS)? Thank you for your always awesome contributions and spearheading advancements! Legend!
I set field weakining to 10a, my engine accelerates even when I let go of the accelerator, and to stop it is necessary to brake, or if I'm driving, it continues accelerating but has no power, is this common?
@@EBIKESBR at 10A it’s not common, no. My best guess is that it’s a result of a poor motor calibration but your best bet is to ask about it in the VESC project discord
@@surfdado wasn’t sure if it was something that you did to your personal board. Or for the whole community. It seemed like it was only for your board in the video. Thank you for the fix!
Thanks so much, Dado. Great work, as all stuff you do. The feature I’d add in the standalone mode is the ability to select one of the favorite presets. I use the default one and a custom one with a very aggressive ATR for steep hills
This would have been huge for me at multiple events now. Riding around on my board late at night, my phone could very likely be dead, but my apple watch always has power. I've rode my board multiple times in those situations not knowing how much more battery I had.
What battery cell type in settings do you recommend for Pint X stock battery? (They appear to be Samsung 30Q 3000mAh/15A) TiA! Answer: Select Sony VTC6, which has same specs.
@@surfdado there’s no flashlight on my paid version though. Is it maybe a button or switch I need to click first? There isn’t any icon there where the flashlight should be
@@joemcclinton did you load custom LCM firmware with your ST-Link as described in my video? Are you running a recent float/refloat package and have set LED to external module in Float Cfg-Specs? All must be true for this feature to be enabled/working
I wish I saw this before I did mess with stuff. Can you please make a video of how to reset a gtv kit back to "factory" tune as Tony sent it out with? I'm having trouble
My board just recently made a weird noise the motor jerked and it stoped moving I did a handtest and the motor jerks. It still comes on and the only error code that came up was duty cycle tilt back should I do motor detection
Awesome!! Posi sensor got rid of most of my false starts (and landings after a trick) and I could never go back. I've been Euro-posiing every sensor ever since, and now with vesc it's just a software toggle. This takes it even further and feels the most natural! 👌
@surfdado I got the vesc program connected to my makerbase84200 it is using a thumb throttle connected by wires on a escooter ran into a issue don't no what cause or how to fix I full throttle it it clunk spin motor shaft a quarter turn or less red light comes on I slowly creep the throttle to a certain point the motor spins green light comes on it spins I let the throttle go while the motor spinning accelerate full throttle it again it still spins green light on it has no point we're give it a little acceleration while motor spin it goes slower neither it just at 1 fast speed and the throttle is weird it has no good response I go at least half way throttle be fore motor move so I have 3 problems speed of motor max 2 acceleration motor from throttle 1 throttle response sensitivity not correct
