You must be a brother from another mother. I swear are on the same page. Same bow, color, equipment, arrow saw, Jimmy Big Tine, etc. lol. I own just about everything Pnuma Outdoors makes. Outstanding gear for the money. Their light rain jacket is the best in my opinion.
@@KargerOutdoors by the way, that Mach 30 set up is sweet. I have almost your exact same setup, except I have GAS strings, run an Option 8 sight, and a Nock On Checkmate quiver. Didn’t care for the post sticking out on PSE’s.
You can use the existing tetra scope mount , just go to home depot and find the proper thread / head bolt , no need to spend another $40+... Ive done it to 2 of them . Side note , 3/16 is smaller than 1/4 😊
Something to consider is having your bow hand fingers unwrapped off the grip before you draw. As you have pressure on the string from the release holding the bow in your hand all you need is have your index finger lightly wrapped around the grip. That way you aren’t repositioning the bow after you have come to full draw. Which is a conscious unneeded thought late in the drawing process. That minor hand movement of moving your fingers is possibly interfering with your setup in the early part of the draw. Just saying. GOOD LUCK 👍👍
as far as the break down and break away you touched on, joel turner (shot iq) says when you break down it means the shot break is a surprise.. idk how true that is, its just something i ran across in the last week. hope htta help keep up the good work
Im a new archery, been watching everything i can but most importantly shooting a lot. Ended up going with the Prime Ronan, draw cycle feeks so smooth and feels good in hand. God bless@keegansulin8508
You have the handle side in the wrong way. It’s adjustable to be able to move it up and down and you have it so it can move side to side. It goes in the exact same way the draw side goes in. Just so you know. Lower the grip a little bit and the bow won’t tip back either. And you really want them to be all the way in. I seen a guys press in a shop and it was all bent to shit because he didn’t have them in all the way.
As for the tear, check spine it will tear one way for under spined (pulls left) and over spined (pulls right) (just check that?????). I have to do 6 click left to shoot Kanetic Pearce arrow (400 spine) out of my SR 6, just those arrow and ONLY it that bow. It's right on the line for spineage but pulls left which is OVER spined But I'm not!!!!! Even Lancaster were puzeled? HEATED CHAIRS and CUP HOLDER'S Then put up a big screan and play TAC shoots!
Measure the arrow from the NOCK VALLE to the INSERT. My saw is the same when you try and lock the screw down it moves 1/16 shorter Just talked to Archery dezign for a draw board set. Put a shop vac on the dust tude and if you can send the air out side? the dust IS VERY BAD. Look at a scale, both for draw weight and arrow weight. and a fletching jig ( Bitezebuger REALY GOOD) and a vice wide limb. and your set
I got an EZ green from my achery dealer, he has 4 at least. The one I got from him came from a Rep. Any way WOW ti works great I had a Bowtech BTX 28, still have a Bowtech SR 6 a Mathew's V3 and a new Hoyt RX 8. The press works VERY WELL with all of them even the wide limb bows, just take your time and lpace the finger's well and press away. I watched you with the draw board attachment, I'm thinking about one are they worth the $ and I guess it make things easy for one person to do some things? ie: timing and some other things? But the one's that mount in the press GOOD???
Awesome 👏 thanks for the advice. I personally am really glad I got the draw board👍 and In my opinion the one from ArcheryDezign is well worth the $. I had a btx limb failure and haven’t had a bowtech since. But I do like the newer ones 🤔my wife just ordered the carbon one and am excited to see her with it. .. here’s a link to the limb failure.
SHIT THAT HAD TO SUCK Ihave had a run with nock failure's in Gold tip GTO nocks Have switched to Easton micro 4mm I shoot 80+lbs so the last failure cost me $250 damaged the cables Thanks for the reply good to hear from out therein RU-vid Space@@KargerOutdoors