Тёмный
Mr. Lucky Racing
Mr. Lucky Racing
Mr. Lucky Racing
Подписаться 1,1 тыс.
Mr. Lucky Racing is a Race Team out of Northwest Missouri. We have a Race shop/Transmission shop in Plattsburg, Missouri. Mr. Lucky Racing Transmission’s LLC Specializes in Drag Racing Transmission’s!!! Go Check Out Mr. Lucky Racing Transmission’s LLC on Facebook!!!
We:
Drag Racing!!!
Work on Race Cars!!!
Street Car Builds!!!
Show you the behind the scenes of our work we do!!!
Future Plans For The Trans Am!!!
12:22
Год назад
Комментарии
@JaredTowler-fp9bg
@JaredTowler-fp9bg 6 дней назад
How much that is my dream car and it's a manual so it's perfect how much
@mr.luckyracing7112
@mr.luckyracing7112 6 дней назад
@@JaredTowler-fp9bg this was my dads car when he turned 16 i don’t think there’s a number in the world he would sell it for
@JaredTowler-fp9bg
@JaredTowler-fp9bg 6 дней назад
@mr.luckyracing7112 oh ok I understand
@RobC2201_
@RobC2201_ 13 дней назад
had to like & subscribe 2min in & i'm hearing all the Urban classics on the radio in the back 😆
@rileyenia9388
@rileyenia9388 17 дней назад
Unless you got a motor pushing 400+ hp headers just add more headache then it's worth on thirdgens it's so tight
@fbombcamaro434
@fbombcamaro434 Месяц назад
Heads are too small. Maybe 620HP at 7000rpm - despite you didnt share the cam details. Good Ported 245 AFRs, with a good matched intake makes 670hp 7500rpm.
@13bfc
@13bfc Месяц назад
Htf did this guy skip the part about the clutch pedal & master cylinder?
@weedeaterjoe
@weedeaterjoe Месяц назад
TRUMP!!!
@nickclevenger5329
@nickclevenger5329 Месяц назад
I can't wait to see this weekends video. I monitor the RU-vid channel. Very informative, and love watching the cars go down the track. It's always a pleasure lining up with you. You guys rock. Let's do it again soon. Be careful
@mr.luckyracing7112
@mr.luckyracing7112 Месяц назад
Always a good race lining up against you guys! One of my favorite finals i’ve been a part of!
@nickclevenger5329
@nickclevenger5329 Месяц назад
@mr.luckyracing7112 You and Josh had a great final last week in the 6.0 index. Keep it up.
@gregharraman8837
@gregharraman8837 Месяц назад
You got it, Lucky. Great racing
@mr.luckyracing7112
@mr.luckyracing7112 Месяц назад
Thank You
@noedominguez9051
@noedominguez9051 Месяц назад
Great job Señor Mr lucky Racing, all the way from Mexico.
@mr.luckyracing7112
@mr.luckyracing7112 Месяц назад
Appreciate the support!
@bfromthed
@bfromthed Месяц назад
Cam and nitrous
@mr.luckyracing7112
@mr.luckyracing7112 Месяц назад
We got her sent off to get bored .30 over!
@TheRoguelement
@TheRoguelement Месяц назад
Bro luv the effort but jesus christ will you throw a gallon of some other color on your bird ...
@mr.luckyracing7112
@mr.luckyracing7112 Месяц назад
Yellows my color😂
@ericsellers9506
@ericsellers9506 2 месяца назад
You breezed rightt over the pedal swap..
@Drew_peaballs_128
@Drew_peaballs_128 2 месяца назад
Awesome videos mate! Just found your channel. Gday from Australia 🇦🇺
@mr.luckyracing7112
@mr.luckyracing7112 2 месяца назад
Thank you!
@noedominguez9051
@noedominguez9051 3 месяца назад
Great job señor lucky racing.
@mr.luckyracing7112
@mr.luckyracing7112 3 месяца назад
Thank you
@scotthartman7185
@scotthartman7185 3 месяца назад
Lets not tell the cam specs or anything…..
@don_dota
@don_dota 3 месяца назад
Nice video 👍🏿
@wes6374
@wes6374 3 месяца назад
Aaaaaaaah, I like it, so Aaaaaaaaah, nice.
@mr.luckyracing7112
@mr.luckyracing7112 3 месяца назад
Thank you for the support!
@charlesbreazeale6494
@charlesbreazeale6494 3 месяца назад
What fuel you running I'm running e85 in my truck
@mr.luckyracing7112
@mr.luckyracing7112 3 месяца назад
We Run C16
@noedominguez9051
@noedominguez9051 3 месяца назад
Great job señor lucky racing congratulations all the way from Mexico.
@mr.luckyracing7112
@mr.luckyracing7112 3 месяца назад
Thank you very much!
@fbombcamaro434
@fbombcamaro434 4 месяца назад
Thats not how you set valve lash....
@coreyboley7526
@coreyboley7526 4 месяца назад
What about the torque arm?
@mr.luckyracing7112
@mr.luckyracing7112 4 месяца назад
I can’t quite remember but i do believe we used the original one
@jayarmitage9609
@jayarmitage9609 4 месяца назад
Your video would be much better without your face being on camera. Try holding the camera more on your project.
@fbombcamaro434
@fbombcamaro434 4 месяца назад
Would help if you are bit more specific. What total timing do you run? What are the cam specs? Thing is flying!
@mr.luckyracing7112
@mr.luckyracing7112 4 месяца назад
We Kinda Jump Back and forth with 34-37 degrees of timing.
@williemoon7522
@williemoon7522 4 месяца назад
i am about to do the same thing with my 73 pinto .. it has a 4.3 with turbo 350 .. i have a trans from a v8 camaro with flywheel and everything ,, are the flywheels the same size and same tooth count ,,
@mr.luckyracing7112
@mr.luckyracing7112 4 месяца назад
Yes they should be. That’s really neat. Good Luck with your project!
@user-zu2ed6ye5w
@user-zu2ed6ye5w 4 месяца назад
I dont install the studs first, too easy to scatch heads !
@TransAmDrifter
@TransAmDrifter 4 месяца назад
Finally some American that has more brains than the rest.
@kimberlymcgee1546
@kimberlymcgee1546 4 месяца назад
Is this the same motor ass the big tire 70s Camaro?
@mr.luckyracing7112
@mr.luckyracing7112 4 месяца назад
Yes it is!
@kimberlymcgee1546
@kimberlymcgee1546 4 месяца назад
@@mr.luckyracing7112 that motor is really impressive I got a 79 Malibu I’m building and imma save up for the next few years for a Ohio crank shaft short block seems like yall got a good combo just gonna put a plate kit on mine try to go like 5.70 on a 28 10.5
@mr.luckyracing7112
@mr.luckyracing7112 4 месяца назад
@@kimberlymcgee1546 Our plan this up and coming season is putting a plate on this car!
@kimberlymcgee1546
@kimberlymcgee1546 4 месяца назад
@@mr.luckyracing7112 that’s badass can’t wait for the videos to come out
@mr.luckyracing7112
@mr.luckyracing7112 4 месяца назад
@@kimberlymcgee1546 Appreciate the support!
@rickstrandberg6398
@rickstrandberg6398 4 месяца назад
Any day of the week I would trade a stack of Pontiac for a pace truck!
@charlesarvidsson410
@charlesarvidsson410 4 месяца назад
how mutch cost the engine ?
@mr.luckyracing7112
@mr.luckyracing7112 4 месяца назад
I believe all the parts came out to about $15-16k
@christopherlaub4069
@christopherlaub4069 4 месяца назад
How much for the TA
@mr.luckyracing7112
@mr.luckyracing7112 4 месяца назад
I’m asking 7,500 for it
@christopherlaub4069
@christopherlaub4069 4 месяца назад
How much
@mr.luckyracing7112
@mr.luckyracing7112 4 месяца назад
Asking $5,500 For It
@kirbymoot3165
@kirbymoot3165 5 месяцев назад
What’s the part number on the exhaust
@mr.luckyracing7112
@mr.luckyracing7112 5 месяцев назад
This exhaust actually isn’t available anymore you can still get the Hooker Arrow Chamber Muffler- #7-21505HKR But as far as headers this was all purchased back in the early 2000s and that’s when my dad had them on his first car!
@DohcJames
@DohcJames 5 месяцев назад
Porting ups the compression eh?
@mr.luckyracing7112
@mr.luckyracing7112 5 месяцев назад
I meant to say Milling up the compression
@Aph87
@Aph87 5 месяцев назад
looking at dirt from tire on rear bumper with fresh paint on it lol
@mr.luckyracing7112
@mr.luckyracing7112 5 месяцев назад
Oh i didn’t paint the whole car just where it was sun baked. I’m buffing places like that out. Just didn’t get around to it since I was letting the paint dry
@itsDripsy
@itsDripsy 5 месяцев назад
Lost me at stupid looking bird😪 good luck with the paint job still my man
@mr.luckyracing7112
@mr.luckyracing7112 5 месяцев назад
Those stickers aren’t meant on these 4th gen’s. Meant no disrespect by it just leave those stickers on the 2nd and 3rd gen’s.
@roycervantes1341
@roycervantes1341 5 месяцев назад
Love the Trans am , Yeee !!
@mr.luckyracing7112
@mr.luckyracing7112 5 месяцев назад
Thank Buddy
@roycervantes1341
@roycervantes1341 5 месяцев назад
Yeee Yeee 🙂
@jaypisme2343
@jaypisme2343 5 месяцев назад
What did the old motor run?
@jaypisme2343
@jaypisme2343 5 месяцев назад
That’s 650 horse power
@mr.luckyracing7112
@mr.luckyracing7112 5 месяцев назад
I was just telling another guy that we dinoed the motor alone at like 760 or something i wanna say
@jaypisme2343
@jaypisme2343 5 месяцев назад
@@mr.luckyracing7112 that’s just the et calculator it could be off I put in 3000 pounds and a 6.10
@mr.luckyracing7112
@mr.luckyracing7112 5 месяцев назад
@@jaypisme2343 Oh yeah with me in it car weighs about 3200 but that motor has now gone 5.99
@milesczechowski2154
@milesczechowski2154 5 месяцев назад
Now did the transmission lines from the automatic fit directly to the 5 speed ?
@mr.luckyracing7112
@mr.luckyracing7112 5 месяцев назад
So we had a parts car that we got the transmission and eveything from. Had to use the lines as well!
@roycervantes1341
@roycervantes1341 5 месяцев назад
Yeee Yeee 🙂
@goodbonezz1289
@goodbonezz1289 5 месяцев назад
Sounds great
@mr.luckyracing7112
@mr.luckyracing7112 5 месяцев назад
Not bad for a 305! New Motor Being Built For Her Right Now!
@FORCFED
@FORCFED 5 месяцев назад
Awesome 😎💪💪 miss your guys videos 📸 Goooooo Mr. lucky 😎
@mr.luckyracing7112
@mr.luckyracing7112 5 месяцев назад
Thank you!!!
@lewisfoltz6306
@lewisfoltz6306 6 месяцев назад
What cam is in that 434 and what is your final timing?
@mr.luckyracing7112
@mr.luckyracing7112 6 месяцев назад
It is Erson 112 Cam and we play with cam timing anywhere from 2 degrees advance to even sometime 4!
@lewisfoltz6306
@lewisfoltz6306 6 месяцев назад
@ .50 duration? Solid or hydraulic?
@mikeupham963
@mikeupham963 6 месяцев назад
What you want is a 9 bolt 3:08 rear end. Australian 9 bolt rear ends are tough as nails.
@mr.luckyracing7112
@mr.luckyracing7112 6 месяцев назад
Yeah this is just what we had at the time… Better then a one wheel peeler!
@user-mj4cy7mp1m
@user-mj4cy7mp1m 6 месяцев назад
Prprprprprprrrrpprprprprpprprprpprprpprpprprrrrrrrrer
@javonsumpter9678
@javonsumpter9678 6 месяцев назад
Did you machine the block too put aarp studs in?
@joedobbins870
@joedobbins870 6 месяцев назад
Stud girdles are useless!
@mr.luckyracing7112
@mr.luckyracing7112 6 месяцев назад
They do help the rocker arms last longer by putting the load across all of them and not putting stress on each individual rocker.
@carlosjuarez7449
@carlosjuarez7449 7 месяцев назад
I took my brand new 76 transam and dropped a stick in it
@mr.luckyracing7112
@mr.luckyracing7112 7 месяцев назад
Badass!
@randyj9965
@randyj9965 7 месяцев назад
What does it weight?
@mr.luckyracing7112
@mr.luckyracing7112 7 месяцев назад
About 2600 without driver