Hello! I invite you to watch my series of videos about repairing the SilverCrest Solar Power Bank SLS 2200 B1. There are a total of four videos: 1.- ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GVqS2vNvNlU.html 2.- ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-J6YQtLY1v7E.html 3.- ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MVjrMfqTZak.html 4.- ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QerkAQrO1VM.html If you’re interested, feel free to subscribe to my channel and click the notification bell on RU-vid to be notified of each new video I upload. Thank you very much for your attention, and I hope you find everything very interesting. Best regards, Ketk Aiball.
I bought a K23 4k camera. Huge scam! The camera hardware WDO c22 is used in dash cams. The user interface was also cheated! It cannot record 4k /30 fps/! /max 1920x1080/ Video image stabilization is only in photo mode, even then it is not effective. Photo resolution is only 5200x3800, not 9152x6864. The bit rate is extremely slow. Actual value approx. 20-25 Eu. but it\'s better for the trash. How do they compensate? And they say, let me prove that they sell shit!
I just wanted to say thank you very much for your excellent video. When my Meridian F80 died last week after a power cut I was really upset as I have had it from new and use it a lot. After watching your video I was able to dismantle it with confidence and repair the faulty fuse. It now works perfectly. Thanks again, Jeremy.
Great device have it for years started my 1.6 cc Astra no problem whatsoever on the package it says what size Engine it is designed for definitely not for large size engines, be weary of these ‘electronic’ experts and their narrative, they are like a rash and are all over RU-vid, like all electronic devices Keep the Guarantee Lidl is terrific when it comes to getting your money back, I’d give it 10 out of 10!.
Just seen how much these go for second hand. Made my eye's water 😬 As a Ferrari fan, owning something like this to add to my Ferrari memorabilia would be insane. But nice to see you managed to save it from going to the tip just because of a faulty fuse.
In use traveling the Tomtom Go 510 left us alone more than once! I still use it because it is a good backup for distances and map details but still: It might have issues: not starting for hours, demanding a computer connection while abroad. And then there is NO alternative rather than stopping and buying a new one on the trip. Cheerio! Never use it without mobile phone-Google-backup!!!! ... then it takes hours (more than an hour!) for updates... I would never buy one again! Also funny is that when I program a route it does route it backward without me changing anything. So when I want to use it again for the same trip one year later it only directs me back home from the destination. Very funny! I could only delete the route and program it new. Hell yeah, that saves life-time! FCK Tomtom!
Can you say me if there is a diode in the black socket which plugs into the bank to prevent the battery from receiving 14V from the alternator once the vehicle is started? If not then I will connect directly with 2 clamps to my old RC Lipo batteries
Hi there great video. Do you know where i could get a replacement aerial for Ferguson Radio Model 3188 1978-80. It was my mum's. Im in UK. Thank you in advance
thank you! after about 10 build videos yours is the only one that shows the “shorting” of JP2 and JP3. mine came with smd’s on the two JPs and wasnt sure if i leave them there and short or remove them and short, or leave them and not short. so again tks.
I used to use an Epson ET-2550 ru-vid.comUgkxciSwynMJ7PnUvvx11rewiu-yFBkZTl53 , an early model of the ink tank style. It worked well, but had one nuisance that drove me up the wall; if you didn't put it in high quality print mode you'd get a streak across the page. I'm happy to say I have yet to see this with this printer. The print quality has been fantastic so far, the set up was super easy. All in all I'm very happy with this printer.
Hi there, got my E520S from Banggood and it was DOA: almost no lifting off (30cm on max power), constantly sliding etc. Assuming bad IMU (MEMS gyro), it has chinese BOSCH clone MPU-6886 (LGA24 chip marked "I66"). If you still have the remains, may I ask you to send me just the red mainboard? I will refund your postal expences... Thanks)))
I've got one of the silver ones, the first ones I guess it is, it was working well at first but then I noticed that, even though the tyres have air in them already, it would always start at zero every time I wanted to pump up the tyres, is this usual? It also seems to take a long time too 😕
Mine is silver and has started reading high pressure 299 psi a lot of the time, other times in the 70-80psi range. When it sticks high you can't get the pump to turn on because the highest it can tag in 299psi
better test the caps with an esr meter!,i built mine from the 5 transistor esr meter project from the eev blog forum,tests at about 100 millivolt so ok for in circuit testing of caps.
span said the company is not seeking to sell its shares to the government or to other investors in a way it doesn’t have the financial resources it needed in a bid not just in terms the stock of the stock market 📈 or stock exchange 📉 or other securities related issues that have not yet emerged from its recent slump in stock market 📈 value but also the fact the company was in trouble with the stock exchange because its share 🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇵🇰🇰🇵🇰🇵🇰🇵🇰🇵🇰🇵🇰🇵🇵🇰🇵🇰🇵🇰🇵🇰🇵🇰🇵🇰🇵🇰🇰🇾🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸