Tina Greens

I have enjoyed the caravan channel now i have found this and another thing we have in common. Wondering if you would be willing to service and upgrade my spectrum for me. Obviously happy to pay. Thanks Tim

Hoppe Ferry

mic is bad, music is too loud

Brown Maria Johnson Helen Hernandez Anthony

Gonzalez Linda Gonzalez Joseph Hall Mary

Jika saya menggunakan port FAN1 yang di beri splitter dua cabang, apakah alarm berbunyi untuk semua fan atau salah satu fan?

Great info

I ordered from Amazon, came in 20 days, no schematic, no parts list. Where might they be?

2024 Just received this board and if not this video .... You helped me A LOT with this video!!!

I bought a pwm controller but it makes so much coil noise in my fan..

Input ampere recruitment this zfc39 temperature controller circuit?

Thanks.

Brilliant, thanks. Turning off my PC to wire mine in now 🙂

Disclaimer for anybody into this: Your TV will most probably not dig S-video input. If you are way into LCD territory, go ahead, you will be fine, but if your idea is to hook up a tiny CRT, forget the mod. Most compact CRT's with SCART do ONLY RGB and composite input! So this is only suitable for them 20 inch and larger stereo behemoths breaking your spine with over 35 kg of glass.

Bonjour pour retire L'ancien polarisant je peut aller franchement ou il ya plusieur couche a pas retire !?

Thanks. Very helpful.

This is perfect for me. As a stupid yank, I have an NTSC commodore 1702 montoir that accepts a 50hz display just fine, but it will not accept PAL. With this and an RGB -> NTSC adapter, I can connect it up just fine.

We have one but don't see a logo on the back at all. Are they all made by the same manufacturer?

i have just bought a 12m rascal telescopic mast and its abit like your one but doesn,t have the base bit but im sure i could make one being a welder haven,t put my 7 band cobweb and rotor on it yet just waiting to get better weather but yes it does weigh a ton 73 good video from m7byf. oh mine got the guys and level on it aswell its sick

Is there a EU reseller for this?

Do you think share the project file😅?

Very well done! You put a lot of love in your building actions. Enjoy listening to the magic of shortwave. Much love, Matthias DL1NDG

Thankyou!!

Lm 567 3. Ncu pinden sonra direk hoparlore mi bagli ses ordan mi cikiyor yoksa ardinodan mi amfi devresi var mı

I did the R60 resistor MOD and got 18 volts on the 12 volt rail. I used a 1/4 watt resistor. I`m hoping it needs to be 1/2 watt, Just waiting on it arriving. It`s nerve racking stuff.

Looks like the same insulators I use for starter motors. I might try that. The white strip stuff,

Thank you, I picked one up on a whim, and your video was the first I find when I started looking for a manual to figure out the dip switches.

thanks for the video regards Allan G6TMO

Muy buen proyecto y muy bien presentado, muchas gracias, me animaste a hacerlo! LU3MKH 73

404. That’s an error. The requested URL /host/0B8Ql_9-ygoisczg4STFicFZPWEE/WB7FHC-Decoder-Sketch.html was not found on this server. That’s all we know.

If you have a wooden house, there is no difficulty nailing an ethernet cable along the celing or door frames. A pair of Mikrotik routers with a directional antenna could transmit it wirelessly on an unlicensed low frequency.

Where do the 12v power supply come from I have a HP all in one with the CPU fan is always running flat out this would probably work well with this PC. Regards Ed

Can this be used to control 12v dc car air conditioner compressor for variable speed?

Cool things for the Speccy!! Do you know if this will work ok on an issue 2 and 6 boards? Thanks for sharing

fatamorgana you look at see.

Awesome I wish I could have heard what you were saying.

Did the link to the sketch change?

Hi, 6 months on is this still working ok? Also, what fixings are used to affix the module to the board? These sorts of kits are always devoid of proper screws to secure.

Is it possible to modify the temp sensor to allow the trigger to start a something like 88° C and be full speed at something 100°C ?

Thank you for this!

I have this and just got my KX3 out for the first time in about 5 years, I was again amazed how perfect this bag is, everything I needed to get on the air, including random wire antenna, paddle, and even USB cable to update the KX3's firmware was all in the pouch so I was good to go. This really is genius for the KX3.

You should investigate using a "dead cat" wind muffler on your mike. Yeah, that's what they're called!

You daa man... thank you.

Спасибо за видео! :)

The only ones I can find now cost 30 dollars :/

Looks like the link for your sketch doesn't work.

Hi, can you advise where you got the ram checker on the blue circuit board from. Thanks.

Can i use this controller to control a speed of a 12v water pump/ 2 wires/ or i should search another controller?

Didnt know you were in to retro gear as well as you're Caravans Dan.