can you then split the bridge mono mode so 2 speakers have the higher output and just use a speakon splitter connected to the other end of the bridge mono cable? my speakers are for my pa, each speaker is plugged into its own channel (1,2) I bought a bridged mono cable ( can only be plugged on channel 1 for bridge mode on my crown just like yours) and want to now split this higher output signal to both PA speakers which are 8 ohm 15" jbl's
When you bridge, it cuts the ohms in half (which is how you get the extra power in addition to running both channels). But if you run two speakers on one bridge it will cut the ohms again, which in theory would give you even more power, but it definitely has a chance to fry your amp, because you’d be at like 2 ohms. You don’t need to “split” the speakon, you could just run a speakon from one speaker to the next through the plugs on the speakers to get the same effect as splitting it. Again, this has a good chance of melting your amp. Proceed with caution.
I just got a is300 and I have a code p0980. The trans fluid is over filled and I’m not sure if they put the right fluid into the car either. I’ve asked around about flushing it to see putting new fluid in and everyone says that I can mess the trans up. I’m just a little confused because that’s one of the things why the code is up
Putting the wrong fluid in can be dangerous for sure. And if you flush it, it doesn’t actually remove all the fluid since some of it will still sit up in the transmission. So you technically have to do multiple flushes to get it fully clean. But I mean, I see no issue in just letting some fluid out if the right fluid is in fact in there. Or flushing it and making sure you don’t add too much seems fine.
Hello How I can order the carburetor I have the same craftsman lawmower model 917.388222 hp 22 I can’t find the carburetor can you help please and thank you??
Thank you for making this video. Someone tried to break into my car and destroyed the lock cylinder. I thought I was going to have to take my car to the Hyundai dealership and have them overcharge me for doing this. I'm 74 years old, but I feel confident that I can do this myself thanks to your video.
Someone just did this to mine too. They removed the cover and took out the part the key goes into. They left everything on the ground. There’s no way they can make a quick mold of it right? Where they hoping to open the door using a screw after they removed it? I already a a broken window on the rear passenger side. They re-smashed my temporary fix. I think maybe the frame prevents that door from being opening now though. So I guess they tried doing that to my front door. Even weirder none of my stuff looked like they had gone through it, but they left a ton of paperwork from other cars I’m assuming they stole in the backseat. If they didn’t get in they throw it in the back window. I tried taking the paperwork to the police station and they said they wouldn’t do anything with it.
I mean, if you have pre-outs on your receiver then yes definitely you can. PA speakers are generally designed to be loud as opposed to home audio which is generally designed to have clarity. So depends on use case.
Ok I have another scenario if your PA speakers have speaker terminal, can you connect them directly to the AV receiver if your av receiver, does not have pre-out
The Bose bass module has high pass crossovers for the cube speakers. The speakers need to be hooked up to the output on that bass module. And then the receiver to the bass module. Otherwise the cubes could blow as they can not handle the lower frequencies. Probably should have not cut of the rca ends.
How does is RUN??? Other than than the distinct instake sound of course did you get even 1 HP?? As you probably know, even with those “heat shields” your just sucking warm air into your engine essentially!
There’s discussion about it in the comments. It works fine, I wouldn’t crank your receiver at max volume though cuz it’s technically slightly low ohms for a normal receiver
@@UCanFixAnything well that’s pretty awesome. I’m currently here recreating the setup my dad had when I was young. I’m trying to find a way to link my Bose Cinemate ii to my Pioneer SX-737 out of impatience/necessity. After much preparation, I purchasied the receiver…then I ended up needing to replace the cartridge & stylus on my Dad’s turntable as well. I got everything connected, ready to rock…only to discover my speakers are shot. I could kick myself! So now my piggy bank is empty, and the Bose are all I’ve got on hand. Wahhhh!!! 😭
I guess yours has the diagonal lines in the background also? Honeywell says that’s normal. I have there more expensive smart color background stat also, and it doesn’t have the lines. Maybe you sacrifice quality for the reduced price?
Excellent video, a question could you just place the speakers in a Receiver without having to place the Subwoofer I'm referring to the Bose subwofer? Do you think it would work that way?
@@UCanFixAnything OK, let's see if I understand, nothing will be connected to the Subwoofer, it's just buying the 5 speakers that your model has and placing them on the Receiver? Because what I want is not to have to depend on the subwoofer. I don't want it here, what model do you have?
Thanks for providing this video. I came across others, which were fine, except non had the orange wire I had. Thankfully i came across your video that explain the install as i needed it to. Thanks again, you're appreciated
Thanks for video I installed my new Honeywell thermostat this morning great instructions you provided very easy to install just following your instructions.
I have a lot of friends and mechanics telling me that 2.5- 3 quarts is too low but I searched it up and I see the exact same videos telling me it’s 2.5 quarts
I found this today anfter watching many other vids.This was the only one that covered all the wires I needed. Start to finsih I was done within 1 hour. Followed u to a T, and walla, my furnace turned on right after I confirmed settings. It had been out two weeks as we thought it was another part. Temps dropped to 18 last night so we ordered best buy thermo, came by noon. Found this vid and you have saved out buts. Thank you!!!!
Thank you so much this is the first video that I watch in the pass 6 months that actually shows all the steps for the intake installation no wonder my engine light came on thank you for showing where the sensors go🙌🙌🙌💪
Nice kit... I like the applicator for the 3" sanding disks.. it works great for wetsanding the paint (if needed) before paint correction.. definitely better than the alternative ( block-o-rubber)
At around 3:50 or so, it is stated that sometimes you need to push in the little button to assist with the wire going in. So, my question is, is it necessary to have the little "push in" plastic button? I've several of these models listed as used and many do not have the plastic piece. Are they still good to use?
Excellent stuff. Im getting an old bose lifestyle 18. And was wondering where I need to place the 5 single cube speakers. I noticed you have 3 spaced not to far from the tv but the 2 rear speakers right at the top corners. This is how I'd like to do mount 4 in each top corner and 1 just above the tv
Great video, What happened if I have an HVAC system with 2 thermostat. 1 control the heating and the other one control the A/C? I want to buy this thermostat, do i need to buy 2 of them?
You should be able to put them both to one thermostat. You’ll need to double check the wiring. You may not have a c wire with that setup, which may need to be remedied.
