The link in your discription is not working for osme reason. It say: {"message":"Forbidden"}. Any reason of why that is? I do live in the Netherlands dont know if that shut be an issue.
It's been wonderful watching Will's journey over the past few years from an excitable kid, to an accomplished engineer who is clearly confident in what he's building.
Of the mechanical masterpieces that have been dreamt up on this channel over the years could the Chang Li be the most entertaining? The Will and Edwin dynamic is awesome and a bit dangerous!
Guys. I want you to think about something. As a welder of 30+ yrs I keep seeing all you youtuber influencers doing the same thing. So whats the process of plasma cutting? Basically a superheated stream of air that is atomizing the media you are cutting and spraying it away from your kerf, thus seperating the pieces. Correct in laymans terms, if i had to explain it to a newbie? So have you looked under your table below the slag path? There is an electronic machine thats got a fan cooling it sucking in all that atomized iron and other ferrous materials directly into the case. Maybe its just me, but i have always kept my machines above my cutting/welding tables so I'm not blasting shavings or slag into them. They don't tend to work well when they short out.
Not likely they will see this comment, but you are 100% correct. This happened to my plasma like 15 years ago, got too much metal dust up in it and shorted the circuit board. Expensive lesson.
Ooooh that's a great point. I keep some 3D printers in the same space as my metal cutting equipment. I don't have much choice given my living conditions, but I will isolate and filter my printing spaces for now!
No drama and no clickbaiting. Like Rob Dahm really disappointed me today with his "I totally DESTROYED my RX-7!" on what looked like a burned out shell...he disassembled it for chassis upgrades...
Please use eye-protection you soon someone wont see much, and bet you rather be able seeing than hearing. Even if that sucks to. Yeah, I'm boring at partys to.
You should look for at least 7°angle for a U-joint, with both ends at the same angle and phase/yoke alignment. If they run straight, the needle bearings gets busted and if the angles or alignment is not correct, the rotational speed will change 4-8 times/revolution. Both ways it makes things vibrate.
Agreed on the two U-joints needing to have the same angle (plus correctly clocked joints), but could you explain what issue needle bearings have with no angle load?
You make a wild claim. Please back it up. I've never heard your claim about needle rollers. Makes no sense to me. Evidence time. Link an article please
Those two personalities and almost any adventure is a forsure hit. You guys do crazy stuff but stay humble and wholesome. May God Bless you and keep you safe.
This is one of the few channels that I can sit down and watch long videos from and be entertained start to finish. Love the projects! Keep up the good work.
@@1one3_Racing I'm 53 & still make stupid mistakes. Considering 2 years ago he didn't know shit, he's come a long way. That's a lot more than I can say about most kids his age. We could sit here and nit pick his flaws all day, like how will they get stuff out the back with the seats permanantly fixed? Maybe put them on hinges?.... point is... He's trying.
Ive only been watching for a few months now, but I have to say that your video quality is fantastic. The editing and cinematography combined with the content are premium in every definition 👌
Ethan and Edwin have such big hearts giving Will a job/opportunity to work with them on the channel and do his best at building cool shit. ❤ Y’all are great. Can’t wait for the monster chopper tests/send!
Love that a Wisconsin company is sponsoring you. Custom offsets is great to work with as a customer at least. My tires were delayed because of the manufacturer of the rubber. They took care of me very well and were very responsive with questions.
Since there's already someone following Will around to check for back pocket phones, maybe give that guy a torque wrench to check all Will's nuts and bolts too.. Loose nuts Willy is gonna hurt himself one of these days
The whole reason im learning all my skills building a retrofitted old EZGO golfcart, with an upgraded electric motor system, is because of this, and you guys. I love it and can't wait to see how you get this to become 4 wheel drive.
Its so nice working on new stuff. When I got my 17 tacoma off the show room floor, coming from a rotted out pathfinder and before that a 93 nissan pickup (litterally called pickup) it was so Premium! First oil change was I was like, wow I'm not getting rust in my eyes when i crawl under and touch anything.
I would like to see or hear steven more often. Or maybe see him learn to drive some stuff. But no pressure! i have a real lack of confidence in my driving skills on the small loader we hace at work. and dont even have my car driving licences yet. So i can really relate to him when he talks about his driving skills.
man I can't wait to see this 100 mile run. That's all I'm waiting for. This is the best thing I've seen on the channel since the beginning (just my opinion, and I'm a weirdo maybe lol).
Man that lift is going to make projects so much easier for you guys. Also I need some wheels for my jeep so I'll be checking out custom offsets! Thanks 👍
Saw the long box and just went "score, 2 post hoist!". The Ballancer is a score as well but the hoist is a game changer. Big ups on the air compressor as well.
You guys are awesome! The amazing things you have managed to achieve through this channel is nothing short of incredible. It’s so cool to see how much you have all progressed over the years too, and I wonder what will be accomplished in the next 10 years. I have to say though, you owe your loyal subscribers a lot for the continued support and it’d be nice to see you give back in some way, like free to enter giveaways or something. Even just little things like parts, machinery, tools or vouchers it doesn’t have to be thousands worth. You could also build an email list this way too, which you can promote through so in a way you won’t lose out. I think it’s something that’s often overlooked which is understandable especially with how hard you all work but it’s, in my opinion, a necessity at the level you guys are at. Thank you for all the great videos and I look forward to see what happens next on the channel!
Love the video, love the content: Will's growth as a fabricator has been amazing to witness. I will add that maybe he should do some research on how u-joints work, by making the front half of that shaft nearly straight, and the rear at an angle, it's causing inconsistent speeds as suspensions flex. U joints actually need matching angles front and rear to function properly.
Congrats on the Custom Offsets Sponsor!!! Ordered my wheels from them, and can't complain. Plus this was the video I been waiting on 🔥 "Places you can't even walk"
Loose Bolts Willy back at it again! Waiting for the inevitable day he or Edwin decide the shop roof is a premium jump ramp with no possible or foreseeable risk involved. I also appreciate how Edwin can turn “throttle” into a 3 syllable word. Don’t ever change, lads!
I bought Anthem wheels from Custom Offsets for my F-150. I bought 5 of them with Cooper ATS's that were delivered to my house with a new set of lug nuts and security lugs. It was a great experience.
I recently started listening to the Sent and Bent back catalog. At the beginning of this video I was amazed how well Will was being responsible and really knows what he is doing. Then they drove it without lugnuts and shhhheeeww classic Will.
Ethan is hacking a box apart with a rusty 3ft sword and says the phrase "clearly that's the best thing to do that with" to Will's hat solution. Oh the irony and how I love it!
easy battery mount is drilling a hole for a hook to go through on each side and then getting one of those rubber stretchy tie downs that have the metal hooks on the end. easy, cheep, and works pretty well.
I do believe your cods have dropped since the first attempt to go 100 miles, how exciting.. both you guys and the car has grown some balls, well done !
A rock-crawling, fully articulated trailer and tow vehicle. Torque is king. Winch on the trailer and on the front of the tow vehicle. Trailer wheels can be powered and braked. Trailer payload mounting points are also articulated, controlling the position and stabilizing the payload. Bonus points for an all-electric solution that can go at least 50 miles into a rocky mountain trail (another bonus for no less than a mile of elevation change from start to payload site), pull out a pickup truck from the bottom of a 50 ft. hill (at least 35 degree slope) and load it up onto the all-terrain trailer, then head out at night back to the starting point, arriving with power for at least 50 more miles of range while towing the payload, all below 32 degrees F.
Will's attempted egress during the rollover was hilarious XD he tried to get out the window, but gravity won. I think you guys are vastly underestimating what the average bear can endure. 25 miles and a gentle rollover? Yeah, when the chang-li gets "places bears cant even walk", that'll be impressive.
Oh no Edwin you bought a Ford? I feel so sorry for you that is going to be a huge nightmare. hopefully you will be able to get rid of it by the time the warranty runs out on it. once you get the four wheel drive under the Chang Li I think you see a noticeable improvement. it was tending to bury the nose in the deep snow. these guys have the life, I would gladly trade lives with them in a New York minute. that's the most fun you can have with your clothes on. this is why GHPC has always been and always will be my favorite premium YT channel for sure. keep up the great work guys.
Watching it bounce around in the snow, I feel like you should paint the top yellow and make it look like one of those Little Tyke cars 😂😂😂😂. The front grill with JANK on it made me laugh.
Came into my shift a few hours ago in a decent mood (as its my Friday and was expecting a nice easy day), then my day shift counterparts totally ruined it the moment I walked in the door and put me into an anti-Premium mood right away, but seeing the Jank-Lee cheered me up! Now to ease my mood and relax and watch some GHPC! Thanks for the always Premium content guys! PS..Will is totally me when I was his age lmao 😂
When Ethan's away the mice will play and nearly die.... It's starting to look like Ethan working with two 13 year old adrenalin junkies. It makes great videos.