No video :(

$190 Amazon 4-Stroke Bicycle Engine Kit Install/First Ride NNKH

Подписаться 588 тыс.

Просмотров 301 тыс.

50% 1

On Amazon:
*4-STROKE BICYCLE ENGINE KIT: amzn.to/3xvL9RB
*ANBULL KIT I GOT: amzn.to/2VCb0do
*2-STROKE KIT: amzn.to/2Vqm0uT
Part 1: • $190 Amazon 4-Stroke B...
Part 2: • 1st Long Ride On Motor...
Part 3: • 97mi Motorized Bicycle...
After seeing ‪@ProjectFarm‬'s video on The four-stroke motorized bicycle kit, I just had to try one! This video is an installation overview and first ride/impressions. It hit 38mph going down a slight hill but cruises more around 32mph on the flats.
~PF's VIDEO: • Are 4-Stroke Bike Kits... `
~~~~~Help Support the Channel Below~~~~~
~Subscribe Here: www.youtube.com...
~Follow on Instagram: / nononsenseknowhow
~My 2nd Channel For Everything Else: / @nnkh2
~Shop on Amazon from this Link: amzn.to/2uDE6eT
~My Gear/Tools on Amazon: amzn.to/36S6J6s
*I get a small commission on any purchases made through the Amazon affiliate links on this page. Doesn't cost you any extra and helps me to continue producing content. Thanks!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Other AWESOME Channels You Should Check Out:
~South Main Auto Repair LLC: / @southmainauto
~BleepinJeep: / bleepinjeep
~Project Farm: / @projectfarm
~Chris Fix: / @chrisfix
~Andrew Camarata: / @andrewcamarata
~Humble Mechanic: / humblemechanic
~Essential Craftsman: / @essentialcraftsman
~EricTheCarGuy: / ericthecarguy

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 532

@mrpartridge8765 3 года назад

A 139QMB carb for a 49cc gy6 really wakes up that little motor. i upped the jet to a #80 and it has so much power the clutch slips even at high speeds. the bfg upgraded clutch solved that problem and I can go up hills with no trouble. my motor is on a schwinn scooter so there is no pedal assist. I cut the muffler off the pipe and welded on a briggs 8hp sausage mufffer and that made even more power.

@puttz2 3 года назад

Where do you find the upgraded clutch?

@christopherjacquez8605 2 года назад

@@puttz2 right I wanna know lol

@williamhaskellhaskell3162 2 года назад

Hi did you use the larger jet on the stock carb?

@AnthraxBird 2 года назад

@@williamhaskellhaskell3162 He said he used a 139QMB carb off of a 49cc GY6 engine.

@cardboardorigami 2 года назад

Share a video!!

@simms196 2 года назад

I had a similar bike engine kit, was a 49cc 4 stroke with 4g belt transmission totally silent. I rode for 3 years to & from work every day was awesome. Throughout that time I added a sick bike parts jack shaft & eliminated the spoke sprocket which gave me 7 gears. Also added lights mirror front shocks leather seat. Absolutely had a a great time & everyday was an adventure. Thanks for this video 👍

@daredevildare3641 Год назад

Did you ever have to change the belt if so where did you buy it

@simms196 Год назад

@@daredevildare3641 I don't remember ever changing the transmission belt. But the chains were somewhat high maintenance & only a problem if not lubed or worn out & stretched to the point of coming off the sprockets that's when they get kinked & better to just replace every few thousand miles.

@daredevildare3641 Год назад

@@simms196 how fast did yours go I am wanting to buy one to go to fishing spots and just ride on back roads did you ever have any serious problems or anything I seen some things of peoples engines locking up but I feel like it was probably lack of maintenance on their part

@simms196 Год назад

@@daredevildare3641 Mine went around 27mph

@JABRONIANGELOR 11 месяцев назад

how much was the fuel economy and how much did it cost in general the bike + the kit ? @@simms196

@gregstaton128 2 года назад

My brother put a 3 hp Briggs&Stratton on a bicycle 50 years ago....2 rear rims welded together for a belt drive set up.

@BEEBEE159 3 года назад

Great video. You did a really good job explaining everything. I'm 50 yrs old; and I'm thinking to get one of these. I refuse to grow old, still a kid inside. lol

@NoNonsenseKnowHow 3 года назад

Thanks Jason I appreciate the kind feedback. And that's awesome! I hope to be the same way when I'm 50. Good luck on it! Put it on a nice cruiser bike

@mmark8394 2 года назад

I'm 69 and just ordered One $180 aud , too scared to ride my road bike on aussie roads , a mental exercise, a slower intro to touring

@NoNonsenseKnowHow 3 года назад

On Amazon: *4-STROKE BICYCLE ENGINE KIT: amzn.to/3xvL9RB *ANBULL KIT I GOT: amzn.to/2VCb0do *2-STROKE KIT: amzn.to/2Vqm0uT ~Project Farm's Install Video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-CJV4TkxSfNA.html ~1st LONG RIDE ON THIS BIKE: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zU6LxvvLe4A.html

@patiencebristol8147 3 года назад

after I had my whole back wheel fall apart in the middle of a huge busy intersection I'll never use a rag joint sprocket again. I like the cnc sprockets that clamp on the hub. It's worth the extra $50

@NoNonsenseKnowHow 3 года назад

Wow what, yeah I could see that happening. Definitely not a great design

@tytraulich4987 3 года назад

Until that backs out cuz of loose screws. Find a free wheel with 12 gauge spokes and use a front brake maybe a drum

@derekpirie9188 3 года назад

The primary reduction drive is chain and is a 3-1 and is for the Pit and Pocket bikes on small wheels. Ideal is a 6-1 reduction like the T-belt ones. If you can fit a 56t rear sprocket, this should bring the ratio close to where it should be and ease the clutch and pedaling on hills. I have a 39cc OHV 4st engine outboard LHS by the rear wheel. it is a geared reduction of 6-1 and till have a 48t sprocket due to the engine size.

@Eternalfight87 2 года назад

That rear sprocket is such a pain in the ass, I use the adapter always now. I've built 3 of them, all 2 stroke. I'd like to try one of these 4 strokes one day

@hemansteve 3 года назад

Love these small engine jobs you can do with a bucket of odd tools. Great video.

@NoNonsenseKnowHow 3 года назад

@REPORODGE 3 года назад

@@NoNonsenseKnowHow where did you put the small fuel filter?

@zackhillyard4497 2 года назад

@@NoNonsenseKnowHow what kind of bike is that I have the moter but my frame is too small I am trying to find one with a bigger frame hole. Loved the video

@NoNonsenseKnowHow 2 года назад

Just an older mountain bike that I found at the flea market cheap. It's a large frame. I believe 21 in

@Syoudous 3 года назад

This is so cool and I never thought at all of this! You're a real troublemaker towards other people. Sweet idea and setup! Love this so much!

@cstott621 3 года назад

you got me laughing at yeah this thing feels like a death trap, but lets take off the governor.

@NoNonsenseKnowHow 3 года назад

Haha yeah I suppose contradicting actions. Grabbing helmet one second taking governor off other second

@mr.a5117 3 года назад

@@NoNonsenseKnowHow think it would be better with fatter tires

@BigChungus-no1ve 3 года назад

@@mr.a5117 Maybe cruiser tires.

@heavystarch100 3 года назад

Safer than a 2 stroke. Got the same Huasheng motor. Never pedaled mine once. Something aint right. I weigh 279 with a 44 tooth sprocket

@label1877 3 года назад

@@mr.a5117 Fatter tires would add rolling resistance. add weight and reduce speed.

@cliffmaxfield176 3 года назад

Great Video. My 2 cents scrap the rubber floppy disc grommet and chain tensioner. Upgrade first build. Two biggest headaches are gone.

@BuildBreakFix 3 года назад

The clutch in these need love out of the box. If you pull the whole Trans unit off you will hear it ping even now when you turn it I bet lol! I hear where the bell is pushed in they leave tons a casting crap and such in the hole. Clean it out un-crap up the bearings in it. Like everything made from the finest Chinesium! BTW! I love your crank removal approach! I would of used bigger hammer though LOL!

@NoNonsenseKnowHow 3 года назад

Thanks for the tips. Yeah I took the clutch off in the second video. Think I'm going to hone it out a little bit and check for straightness

@gta5grindzxb145 3 года назад

The belt drive transmission for these engines is very torquey. The one I had would almost pull up the front wheel.

@Levers103 2 года назад

Where do you find the belt drive transmission? Hyperlink?

@DEEQCODM 9 месяцев назад

😂😂👌

@bigrocc3925 3 года назад

get a small electric leaf blower and rig it to the air intake, you will hit 45+ for sure if that little head doesnt blow lol

@NoNonsenseKnowHow 3 года назад

Hah a yeah that sounds fun, but I don't think I trust the bicycle at 45 mph

@jasperdomacena6491 3 года назад

it needs a bigger sprocket so it can go up a slight incline without problems, and it can still probably hit 35mph but a much higher rpm. In the Country side of the Philippines a 125cc motorcycle with a cargo sidecar can literally carry ¾ of a ton of stuff up a steep hill with just a modification with the final drive ratio

@NoNonsenseKnowHow 3 года назад

Yeah I agree. This rocket the kid came with much too small

@theoldmanreed8818 2 года назад

Is your wife girl friend that heavy?

@gringoanon4550 9 месяцев назад

I bought a pair of saddlebags off of eBay, and used it on my small motorbike, but I thought that it would cover the motor on one of these as well, as I have just finished putting one of the two-stroke models on my mountain bike you just cut a hole in the saddle bag and it fits tightly over the petrol cap, then when the cap is on it locks the bag down and should hide the motor. They were pannier bags I think and cost around five bucks.

@XfireKeenmike 3 года назад

Disguise the gas tank to look like a tool bag with backpack fabric. Plastic sheet like a racing number decal to cover the engine.

@NoNonsenseKnowHow 3 года назад

Good ideas!

@umamifan 2 года назад

Where I live the cops won't care much. In fact trying to cover it up would look more suspicious lol and unless you can suppress the sound a lot they will hear it and think something's up regardless

@mmark8394 2 года назад

What about a rear luggage Rack with the tank in a bag With an extra exhaust Restrictor or baffle,knobs around here are labelled Dui, potheads or going Fast to evade someone =frantic noise , attracting unfair interest, go undercover don't speed in built up areas, good luck

@DirtBike101 Год назад

I got the same kit 3months ago…… works well hard to setup unfortunately I got my finger right in the chain and chopped 😅 my finger off and got surgery other than that be careful with it lots of fun 😂

@M.TTT. Месяц назад

Dayum!

@BEEBEE159 3 года назад

Put a basket on the back of the bike, and mount the fuel tank inside the basket, to hide it. The fuel tank will be concealed by the things you put in the basket.

@NoNonsenseKnowHow 3 года назад

That's a good idea!

@abrokendowncar 3 года назад

Except anyone can see the engine

@theoldmanreed8818 2 года назад

Mount the engine in the basket on the rear in the basket and use a 2 or 3 horse power briggs use screen for breathing holes and run exhaust out the bottom. Put fuel tank in front of handle bars.

@theoldmanreed8818 2 года назад

Tell the cop you dont entertain suspicions

@DavidHolmgren-vg7yz 4 месяца назад

I just installed the same engine on my bike and your video was a great help. Thank you very much.

@NoNonsenseKnowHow 4 месяца назад

Glad it helped

@MrPolymers 2 года назад

I was real close to purchasing a two stroke engine for my Bicycle. Then, my wife shot me down and suggested I pay the $550 for an ebike conversion. My first wheel was bent like a pretzel. Finally, got a good one. The advantage of the ebike. I don't worry about the cops as the thing is silent. The negative. I'm 225lbs and get about 15 miles just using throttle. Would not make a long distance tourer. I have a 143 HP Yamaha FJR for that. It is nice just to hop on and go.

@NoNonsenseKnowHow 2 года назад

Yeah the electric bikes are awesome! But definitely can't beat the range and cost effect effectiveness of the four-stroke bicycle kits

@BeerkegGarage 3 года назад

Project farm is my boy lol love his vids also. Thanks for the video

@antso9817 Год назад

new favorite channel , you should t up with VGG, aka Vice Grip Garage , pretty sure both you and partners will hit it off! love from NZ

@ianburit3705 3 года назад

Just another point, here In the UK these kits are Illegal to use on any Roads or paved side roads (UK LAWS) BUT, how about mounting the engines on a rear wheel carrier/ rack driving a dynamo to charge a battery feeding an electric motor that propels the cycle/ a battery propelled bicycle WITH peddles IS legal in the UK to use on Roads (highways) but lots of work - lol - just saying though as It makes a joke out of UK laws..have a great ride.

@jeremydickman6674 2 года назад

Electric kits $250. US, on ebay. Foldable solar panels, super cheap. If they made a better kit, you could get a electric front hub, electric rear hub. Could have 2/3/4 wheel drive bicycles, that charges itself while you ride.

@datadavis 2 года назад

Convolute EVERYTHING! 🤣

@fistofthenorthstar9010 2 года назад

Could you attach a generator to a electric bike ?

@The1stHomosapien 3 года назад

omg i bought this 4 strok ekit, recieved it today, so happy, then i realise ive only got the engine! no other kit. just the engine. which looks all perfect.

@NoNonsenseKnowHow 3 года назад

Oh damn! Well if you got it from Amazon, luckily they're really good about customer service.

@The1stHomosapien 3 года назад

@@NoNonsenseKnowHow no its from a ebay seller. Chinese based, but they have a storage in birmingham, i think.

@NoNonsenseKnowHow 3 года назад

Oh. Well yeah eBay is another story. A lot of time they put details and fine print like includes engine only

@barrykrajeski5598 3 года назад

@@NoNonsenseKnowHow I purchased my kit at a company BikeBerry.It cost me a little more but they are great and have a lot of neat stuff.

@theoldmanreed8818 2 года назад

@@The1stHomosapien Get on down to birmingham and rattle some doors and whatnot

@tysonkonken6184 3 года назад

That part where you yelled "Pretty quiet with no muffler"... hilarious! 🤣🤣

@theoldmanreed8818 2 года назад

But true it was quiet

@ridwanmujahid_2.020 2 года назад

Him: it really can't handle hills Me: [laughs in floridian]

@FranciscoRamirez-ql6et 2 года назад

I got a 2 stroke it took a while to get it going to get it right. First it’s chain then the guide but made chain really short. Did some adjustments. Runs like a champ

@robertjoseph5206 2 года назад

I paid 150$ for my 80cc motor kit off Amazon and let me tell you it runs really good

@cheesebeef4902 2 года назад

@Robert Joseph which kit did you buy?

@johnbaker3817 Год назад

A good ride is a river Levi It goes on forever and so does the scenery in the beauty

@johnmurphy9688 2 года назад

loving these videos. what a great channel.Always a new project going on. Think I'm addicted now. 👍🇮🇪🇺🇸

@Warbeast5593 2 года назад

Getting the wheels balance will help with the violent vibrations

@nb3channel 2 года назад

You should be able to start from rest by just twisting the throttle without pedaling. Also it should be able to handle hills without pedaling as well. I can see what you are missing is the choke switch, which is the white plastic that you didn't touch at all, and is left at the closed position all the while, that's why you're not getting enough power. You are supposed to close it when cold-starting the engine, and then open when it's already running, where the bike can be operated like a regular scooter. With the choke operational and you still have the same issues, then your centrifugal clutch is faulty.

@theoldmanreed8818 2 года назад

You are a genius

@craigmonteforte1478 3 года назад

I guess all in all it’s impressive that out of the box it worked without major Fabricating of custom parts ! You should install a set of Handle bars turned upside down like they used to do on the old Race Motorbikes

@conker33350 3 года назад

Looks like you could have slapped a bigger motor on that probably would have made it easier to take off without pedaling. But this is still very cool. Nice video.

@mikesbarn1858 2 года назад

If you look inside the ports you’ll see a skirt blocking 1/4 of them. I dremelled it to a ramp. I also jetted the carb and put a breather on the valve cover. Then I sealed the crankcase breather hole. Mine was governed by the size of the carburetor.

@NoNonsenseKnowHow 2 года назад

Did you notice a power increase? Honestly I don't really want this thing to be any more powerful or faster. I enjoyed the fact that it is mild and gets incredible feel mileage

@mikesbarn1858 2 года назад

I answer to your question my top speed is 36 after mods. We are flat with virtually no hills.

@davidhitchcock9340 3 года назад

Put an e-bike sticker on a make shift fleece or felt with resin... easy to stretch and shape....

@NoNonsenseKnowHow 3 года назад

Lol and yeah when I get pulled over I'll just point to the evike e bike and be like look it's an e bike

@KeaganLegit 7 месяцев назад

40 mph honestly sounds amazing, I'm gonna order a kit tomorrow and get the bike next paycheck

@NoNonsenseKnowHow 7 месяцев назад

Definitely pretty amazing! But be careful. Pretty sketchy on a bicycle going that fast

@KeaganLegit 7 месяцев назад

@@NoNonsenseKnowHow will do! Gonna get all the necessary protection too

@oldgrizzlygamer 2 года назад

I've always wondered what it would be like if you could install this with a 3 speed hub.

@Saddletramp1200 2 года назад

I have several thousand miles on mine. I do build motorized bikes for a living. There fantastic.

@PoisonShot20 2 года назад

Any videos or pictures? I love to see them. Ppl concern about speed, not fast enough, it's a bicycle for crying out loud, not a motorcycle! 🤣🤣

@Saddletramp1200 2 года назад

@@PoisonShot20 I have some but they are not quality. Saddletramp1200 on youtube.

@markmurrillo2028 2 года назад

Hello, I love the video I’ve had motorized bicycles before but never put a kit together like you did. I had a ATV quad in the past and there was a saddle bag that fit over the gas tank that might conceal your engine if you’re going to a place with a lot of cops you can try that To cover it up.

@kurtvanluven9351 Год назад

I prefer my 2 strokes. I expect to hit 60 on my 2 speed Puch build. But 38 is ok for the Chinese kits.

@tomv5988 2 года назад

Thought about buying on the install seemed to go smoothly. Guess it comes down to which bike is best for the kit. 4 stroke is probably best I mean straight gas right? no mixing with the oil or breaking it in?

@gerardjones7881 3 года назад

Install a bigger rear sprocket to lower top speed. It will make the auto clutch functional and climb hills . Mine does 24mph. Drill and pop rivet tank brackets to frame. Same with chain tensioner.

@BEEBEE159 3 года назад

What sized rear sprocket did you use; how many teeth? If it's not too much trouble, could you give me a link to the sprocket you used? Thanks.

@mmark8394 2 года назад

24inch wheel is the same But take out a few links

@chrisgoains 2 года назад

I don’t know shiitake

@mattrhoton9219 2 года назад

I think you have that backwards. a smaller rear sprocket would lower your speed but increase torque applied to the wheel.

@gerardjones7881 2 года назад

@@mattrhoton9219 nope. Smaller gear goes faster.

@JTVlogs.247 2 года назад

Wow mine doesn’t go as fast lol but mine is a lot of tq. Requires no pedaling even up hills. I got mine off Amazon and it’s the belt drive to chain

@martinlicht1969 3 года назад

Maybe having a belt primary with a CVT style transmission would make for smoother operation through the rpm range. Might get you up the hills too! Last thing I want to do, is pedal a bike with a motor on it uphill.

@kjohns1413 3 года назад

Do you know of one by chance? I’ve never seen one for the two stroke or 4 stroke kits but would be awesome.

@USA__2023 3 года назад

@@kjohns1413 pretty sure they sell the 4 strokes with torque converters on ebay.

@darkhorse2reign 2 года назад

super cool build. I'm a tinkerer and want to learn more about ICE. The ''death trap'' feel is likely from frame flex and that ''CHORK" Chinese front fork...super nasty build quality on that fork. Give some consideration to a SOLID steel high quality bike and transplant the engine.

@donaldhunt4 Год назад

Another awesome video! Now I know how a centrifical clutch works, thank you very much!

@tysonkonken6184 3 года назад

BTW, you never use lock washers with unlock nuts.

@NoNonsenseKnowHow 3 года назад

why

@dgb56bgd Год назад

CUTE. I’m a 66 YO AMERICAN, living in China…since 2005. I’m often AMAZED by some of their cool designs…but QUALITY IS ALWAYS QUESTIONABLE….which is why I originally came here. I’m a multi-layered Engineer, specializing in product development, manufacturing and quality assurance. They have a wide variety of MINI-EV designs (3 wheeled and 4 wheeled) that should be more widely available and used in the USA. Sounds like something I might undertake myself…MADE IN USA. Blessings

@ianmangham4570 10 месяцев назад

I love it ,just something so fun about bicycles with little motors/engines 🤟🤠🙏💯 let the fun begin 😀

@wompstopm123 2 года назад

i had 2 of those chonda engines the 1st one came with a bigger torque converter and would go about 25 mph max speed and would take off quickly, the 2nd had the small torque box shown in this video and topped out at 20 mph and would take a long time to accelerate

@drewsey5733 2 года назад

I’ve got one that will do 20 comfortably. Got a tach turns out that’s about 4500 ish rpm. I don’t like running it faster than that because it starts vibrating like a mf. I have a new rear sprocket coming thats way way smaller. A 28 tooth sprocket to be exact. So we’ll see how that goes.

@michaelcampbell9457 3 года назад

Might be a little labor intensive but I was thinking of creating a custom faring to cover the motor by cutting up a plastic barrel or something similar. Possibly a used faring from a motorcycle salvage yard could be easier.

@NoNonsenseKnowHow 3 года назад

That would be awesome!

@thesupremecmo1622 3 года назад

You should get a sprocket hub adapter for it would be A lot easier nine bolts could be a real pain

@NoNonsenseKnowHow 3 года назад

Yeah I was briefly looking into those. The bolts are definitely time consuming but it works good. Unless you have to swap outs brackets

@cumminsscout 8 месяцев назад

It would be so cool to have freewheel cranks and run the engine through the bike's derailer system to have gears.

@billwessels207 3 года назад

You just need your invisibility shield to disguise it Batman!

@pitapitabread 4 месяца назад

i've learned to also tighten all the screws, nuts and bolts that i can get to on, in and under the engine before i start it

@dronepilot260rc Месяц назад

I just got done ripping around on my 4 stroke build and it does 40+ mph couldn’t get my crankshaft to work so I’m just motor power only and it runs my 290# self around just fine 😅

@moofdoggmike 3 года назад

no nonsense skid lid! Smart!

@johngoodin3445 Год назад

It looks great. I’ve got to admit that I did a double take looking at that muffler setup. It’s the very first time I’ve seen one pointing straight down. I wish the community would share what bike apps they’re using on their phones. I tried searching Apple, all I could find were exercising apps. Are apps under Apple made for just cycles in general?

@Yardie1682 3 года назад

Get a 50 tooth rear sprocket that will solve your vibration issue for the most part

@NoNonsenseKnowHow 3 года назад

I appreciate the recommendation. I kind of like the 38mph top speed right now though. I took the clutch drum off and it looks to be pretty warped. Going to try to correct that first and see how it goes

@krabkrabkrab 2 года назад

Bicycles and motorcycles have top speed roughly 31mph times the cube root of the horsepower, provided the gearing is such that top speed is at the RPM corresponding to peak hp. 1.4kW = 1.88hp and the cube root is 1.23. 31x1.23=38mph, so that works out.

@xthe_moonx 2 года назад

i got same motor and 38 mph wow i can only get 30-32 mph. i removed the governor thing but didnt make a difference. how can i get this thing to do 38?

@Slenderman63323 Год назад

@@xthe_moonx you probably have a higher tooth rear sprocket which increases acceleration but reduces top speed

@catsbyondrepair 3 года назад

As long as you have a motorcycle license your good.

@NoNonsenseKnowHow 3 года назад

I thought under 50cc you don't need one.

@catsbyondrepair 3 года назад

@@NoNonsenseKnowHow most states classify them as mopeds under 150cc in most states you don't need insurance. But I would always have a motorcycle license. Cause cops will screw you if they want to my state especially.

@NoNonsenseKnowHow 3 года назад

@@catsbyondrepair got you. Yeah I mean I would just play the I didn't know card and hopefully that would work out. Of course I do have my motorcycle license though

@catsbyondrepair 3 года назад

@@NoNonsenseKnowHow then you are good

@austinkirkman5788 2 года назад

I have one of these and I have to help it pedal up minimal inclines. I’m lucky to get 15 mph on level ground at WOT. Transmission issue maybe?

@Moon-magic109 2 года назад

Love it, thank you for sharing

@loganm.5068 3 года назад

What's the purpose of changing the front sprocket? And is it possible to leave your old sprockets on, disengage the clutch, and ride it like a normal bike if you run out of gas?

@NoNonsenseKnowHow 3 года назад

To be able to put the longer crank shaft in for extended pedals

@jackmitchell123 Год назад

Very good. I built a 2 stroke version, kinda like it better. Has that awesome beehive sound, I have a big chrome expansion chamber on the thing so it looks pretty bad ass. I have been able to get some pretty good performance out of it with a high compression head, upgraded carb and exhaust. Sure is loud though!! It makes so much power now the clamped rear sprocket like yours has bent all the spokes!

@thaddeusgettys2726 3 года назад

I also dont like those clutches, you can get a go cart clutch off amazon for like $50-$70. They are belt driven and act like an automatic transmission. Ive heard they dramatically affect the torque and top end of a 4 stroke.

@NoNonsenseKnowHow 3 года назад

Yeah they are definitely kind of junky. Is that a direct bolt on to this engine? I'll have to look in to one

@thaddeusgettys2726 3 года назад

@@NoNonsenseKnowHow They really should, some of them have to have a small part of it grinded off to fit. But a lot of them come with that part already missing.

@utsaar Год назад

Is there an updated link for the kit? Amazon page is down.

@jerryanstey7058 3 года назад

I DIDN'T LEARN MUCH ,BUT NICE SHOW !

@jeeprenegade1985 3 года назад

I have a Chinese, stand up, gas scooter and the centrifugal clutch vibrates bad when taking off until it stops slipping. Maybe it's just the clutch slipping. Try taking off in a lower gear if you can.

@IntoTheLens827Live Год назад

WOW, Cool Engine. Good Luck With It!

@MoRzX3 Год назад

Just bought one 👍🏻

@franciscourena5636 2 года назад

**** RESPECT **** GREAT PRESENTATION

@JavierGonzalez-oe1qq 2 года назад

good job dude...You got really good presentation skills...was the engine conversion with it? Seems like a moped is much safer

@NoNonsenseKnowHow 2 года назад

Thanks man. And yeah mopeds are definitely much safer! This thing certainly kind of cool and gets incredible fuel mileage though. I did two other parts to this video as well.

@williamhaskellhaskell3162 2 года назад

Did the project farm build have a wobbly pedal sprocket also?

@theoldmanreed8818 2 года назад

Widen the pedal crank bearing retainer. For that pedal extension to make pedal crank bearings last

@theoldmanreed8818 2 года назад

Actually use tapered roller bearings on the pedal crank.

@dschaed 2 года назад

Great videos bro! I live at the shore but my sister lives in Hamilton. I definitely plan on riding there next time I’m out that way! I also plan on riding like you…not pissing people off on the trails, switching from the trail to road, etc. Have you had any trouble with the police or Rangers since this video?

@NoNonsenseKnowHow 2 года назад

Thanks man. And no I haven't had any trouble yet. Actually did a part three video where I rode it up to Manhattan. It's all my other channel though. link in the description

@jasonz7788 2 года назад

Great work Sir thank you

@user-rt7hv2mt7i 9 месяцев назад

A jack shaft put the drive to the 5 speed shifter gives you low to high speed

@misakiyoshida 2 года назад

loool I put a Predator engine from Harbor Freight on my fat fire Mongoose and went from Kenosha to Chicago before my pant legs burnt off...LMFAO!! 43 and did it cuz gas prices never had so much fun!

@drrrw Год назад

Would it be better for the hub at the back to be a modern disk hub for bikes and machine a sprocket big enough to sit on the disk brake holes to make it a better built sprocket? Maybe alignment issues would occur. Also your rockhopper looks the part.

@arksrandom5968 Год назад

The issue with a rear brake disc is the little amount of space you have available to actually put one in, if you DO however have enough space then you need a sprocket adapter for the rear wheel hub and then a disc brake adapter that can be bolted onto the sprocket itself

@niteshades_promise 8 месяцев назад

It's way better to use 6 bolt disc hubs. Sprocket+spacer+ disc=zero headaches. Don't forget loctite. 5 years zero issues.🍻

@patrickpalmer3374 3 года назад

Nice demo

@NoNonsenseKnowHow 3 года назад

Thanks my man

@hillock10 3 года назад

I think this setup is only capable of about 29 mph flat ground.

@NoNonsenseKnowHow 3 года назад

That's what I was thinking also, but if you see the second video, she was definitely in the 30s on flat ground no problem

@hillock10 3 года назад

@@NoNonsenseKnowHow I don't believe it.

@NoNonsenseKnowHow 3 года назад

Why would I lie? I'll do an update video with a more thorough display of its actual speed on actual flat ground in the future

@hillock10 3 года назад

@@NoNonsenseKnowHow It's not a lie, but an inaccurate measurement. GPS measurements can be off by 5mph. Do the test again with a calibrated speedometer.

@IPCRo 11 месяцев назад

@@NoNonsenseKnowHowdont forget the kit hasnt been broken in yey so it's Power is not at maximum.

@Mishakol1290 2 года назад

That bike frame has so much room for that motor good gosh lol

@Hunting_Grt_whiteNorth Год назад

I saw some unusual bicycle fairing kits that might suit your purposes. Ever consider 2x motors on a 3wheel or tadpole recumbent bicycle?

@chrisstokley7687 Год назад

engine is awesome.. transmission needs improved... belt 1 is ok ... bent easy when cheep chain stretched and jumped off.. note too self.. buy best chain before try break it in !

@tytraulich4987 3 года назад

The 2 strokes aren’t worth not. Not unless you get one from a builder which basically includes nothing of the original (not the case, not the bearings, crank (well unbalanced) Almost nothing. Maybe a piston if non reed. The 4 strokes are the way to go. Just don’t rot on them at high rpm for long periods

@NoNonsenseKnowHow 3 года назад

I agree.

@mmark8394 2 года назад

In your experience? Which is? Facts reasoning examples rationale attitude Over to you

@IPCRo 11 месяцев назад

@@mmark8394got a 2 stroke. Had problems with it after a month. I agree that it wasn't babied, but that kit had big carburetor problems and the acceleration handle just broke. My magneto failed, the spark plug boot just broke the metal part on top of it, one of the 3 nits the clutch was mounted on broke and my chain snapped 4 times. And in the end the engine decide to blow a gasket. But yeah, two stroke are reliable (if they are not turned on).

@JenniArmstrong Год назад

This would be great if it wasn't a complete kludge. That whole crank replacement thing is absurd, the rear sprocket on the spokes will 100% bend them and ruin a normal bike wheel, and the engine mount isn't going to work on so many bikes. Even though the center-o-gravity would be weird, IMO, this engine oughta go behind the seat, and the fuel tank belongs in the triangle where the engine went. Seems like you could share the main cassette with the regular chain, but ultimately this design needs a freewheel on the pedal crank to really be solid. And i've never seen one of those.

@jefferybye2169 2 года назад

Im surprised that the exhaust didn't flow out the back..thats weird

@AlternativeTactics 8 месяцев назад

ESOTERIC AGARTHAN ARYAN KNOWLEDGE: THE UPLOAD

@sokka1005 3 года назад

"Chubber. Chinese rubber." if you dont mind i'll be using that later

@jeanlawson9133 2 года назад

Cool did great,,,, really informative 😎

@kangaroobooks1010 3 года назад

You got it! 👌

@hillock10 3 года назад

More research on this kit is it may come with a 3:1 cheapy gearbox which could give about 37 mph and almost no torque. Very poor gear ratio. Belt drive would be much better.

@MyDIYAdventures 3 года назад

That’s awesome!😃

@knowitalls8079 2 года назад

Seen a lot of other videos that the 4 stroke did 18mph idk about to 37 maybe 37kph lol

@dehoedisc7247 3 года назад

The centrifugal clutch is Not where you show it in the transmission case, but at the engine itself, and by using a small rear sprocket, you have gotten the top speed high and the engine bogs down at lower RPM.Beginner.

@NoNonsenseKnowHow 3 года назад

yeah, found that out when I took the cover off. It's still in the case regardless. The point of the video was to use everything that the kit came with and see what it does. Maybe you missed it the point of the video

@dehoedisc7247 3 года назад

@@NoNonsenseKnowHow Maybe you missed the point that viewers are able to comment on the videos and that they are almost certainly going to express an opinion regarding the content of your project.

@NoNonsenseKnowHow 3 года назад

I wouldn't even call this a project. It's an Amazon bicycle engine kit that I slapped on a bicycle.

@dehoedisc7247 3 года назад

@@NoNonsenseKnowHow Your non-project looks very much like a half million other 2-stroke rattlers/smokers and it is often entertaining to see how the next one gets built, about 98% just like the others. And once in awhile, someone gets a new idea and it gets even more interesting.

@IPCRo 11 месяцев назад

@@dehoedisc7247who hurt your little brain?

@brandonlamontcooper8141 Год назад

thank you my friend

@craigbuckley7343 Год назад

Cool vid....def wouldn't hurt some mods

@dkpopatop6251 3 года назад

Wtf. How the hell do the people making videos like this go miles and miles. No matter what i do within a few miles sometimes blocks my tensioner fails and pops my chain off. Heres a edit on this comment, since the original posting i found out that the metal engine mount plate was wider then the cast iron pieces so every time id throttle up the whole engine would rock on the plate, i fixed that along with better bolts on the tensioner, so far so good

@NoNonsenseKnowHow 3 года назад

It's definitely a junkie chain tensioner setup

@dkpopatop6251 3 года назад

@@NoNonsenseKnowHow every chain tensioner ive tried,, so thats like 4 junkie chain tensioners

@dkpopatop6251 3 года назад

@@NoNonsenseKnowHow im tried the spring loaded one and like 3 different other ones. The only one i haven't tried yet is the arch style. I can't tell you how many bolts ive stripped or broke trying to stop it from moving or the biggest problem is the wheel itself sliding out of place

@NoNonsenseKnowHow 3 года назад

@@dkpopatop6251 you put the tensioner on the bottom correct?

@dkpopatop6251 3 года назад

@@NoNonsenseKnowHow yeah. Ill get it all set everything looks good and in line, ill make sure the slack is good and ill start out riding with things going good then the tensioner wheel slips down. Its frustrating I've stuck so much $ into it already