I just picked up a 212 greyhound for 75 bucks brand new. They don’t sell them anymore and are built better than the new predators that they sell. I like them though
This one is the coolest yet!! The rear axle was really bent before I don't think it got any worse after the "EPIC" jump!! I bet Isaac it'll be fine's whole life flashed before him!! lol!!Wuuuuu doggie!!!! Looks like it ever so lightly reached 30MPH. Would have gone faster if you would have let it!! Nice catch guys!! Keep on cart'n!!
you could see the axle bend when you first started it at the beginning of the clip and it looked to be bent in about the same spot. I think you overpaid by about $10 dollars because of the bent axle. Give it a V8- and it'll be fine
My thoughts exactly I've cleaned carburetor a lot worse shape than that I'm sure. Parts cleaner would be the best but you can still do it by hand that's why they make carburetor cleaner. I have had a few carburetors that were too far gone but you can get one from China for twenty thirty dollars.
axle was bent at the start. mod it for more suspension travel. Use a bigger axle. Adjust front end so the steering isnt toe-ed in so far, you will have less bump steer. Also the single a-arm front is hurting steering performance.
I still can't believe I bumped into you guys at Krispy Kreme during mustang week in Myrtle Beach that was super sweet a true pleasure guys keep up the good work !
I've watched several of your videos, but after watching the one where you ran over the bush, I had to subscribe. You guys remind me of myself, you must be Texas boys.
get another axle and put a third bushing i the middle , jump that thing it was made for it . It is just you are heavyer than a 12 yr old . And " it'll be fine"
+Isaac it'll be fine do you think I should open header my Tecumseh 6.0 horsepower on a similiar kart but it's getting blow by and is losing power by the foot that it moves
It's a Murray!!!!!!!) my first mower was a Murray, probably still running, mowing grass somewhere. Don't know about there new products, but there old stuff is tuff as nails !!!!
Ya the axle was bent already, noticed that when you were swapping engines. Fenders be good too, you will tire of getting constantly splashed. I foresee a bunch of messy trails in your property lol.
Today I Got a go cart I found on the side of the road for free that had sat in a paddoc for 3 years to start with a bit of fuel and $5 worth of fuel lines. I'm excited to shred around the neighbourhood
You guys need to get one of those big red manco full suspension go carts. They are so much fun. And you can swap the shocks out for the rear shocks off of FourWheelers. And it makes the suspension a beast and it's a straight bolt on no welding or cutting. I used to have one growing up. Had a 15 hp suburu motor and headlights ext. Elec start. With a 40 series converter.
They are called a manco XTK 713. Look them up. I know where u can get one. But it is down here in lasvegas. It already has swapped over all the shocks off out 4 of the same Polaris trail Blazer FourWheelers from a junk yard so I could put one on each corner. And that thing sat so high and had like 13 inch of suspension. Those karts are badass with a pair of bigger fourwheeler shocks.
LMFAO seeing the cat bolt! And I love cats. Got his or her heart rate up. You just added 1 life to that cat with one simple (and awesome) 3 second rev. I am so glad you caught that on the vid. Anyway! On to the nuts and bolts of this feature.
@@Someaussiewavz i was 15 years old when i made that comment. And it still stands. It's still fucking clickbait. "hey we bought this chassis for $200...here's an entire engine we put in, plus whatever it didn't have." its stupid
that axle was that bent up from the beggin when you had it running on starting fluid. it was the first thing i was looking for. them always have bent axles bad disign fun toy.
Speaking of build offs, You and Ike should do a build off but this time you both your own chassis start to finish, Then test them based on a series of different challenges. It’s one thing to build chassis that’s already there, But a true build off is building your chassis and then the rest
great go kart find and fun video! The axle was definitely already bent before the motor swap. Of course....those jumps didn't help either, lol !! Keep up the great work guys !
I have never had much luck with Tecumseh engine's, always have carb problems, you can dig an old Briggs out of the pond, flush the oil, and it will run!!!!
The things got compression and it's got spark and runs on ether all I need is that float needle to slide up and down so I can get gas in the bowl and the bolt holding the ball is actually the jet clean that out at the run like a champ
reminds me of the yerfdog kart i had , gave 50.00 for it. needed a bowl on the carb , we took it to the lake bottoms and rode for miles. really funn hitting a big puddle in one lol
@11:44 Spotted a creeper trying to sneak in and steal the carburetor off of the new predator. You can see that he suddenly realizes that he is being filmed and sneakily crawls back to his natural hiding spot on the side of the garage. @12:24 Thinks he's behind a two sided mirror.
I watched the rear axle before you changed engines, the axle was bent as bad before you changed the engine.... also looks like the deck the engine sits on might need to be welded?
