$72 Mud Mower Build!! 

Thanks for the shout out! Can't wait to see what the cub cadet turns into! Im sure you will come up with something that fits it well

Same machine I did for free 3/4 rear pully and front was 2-3” it ran 57 mph lol Same exact mower as airens to the bolt !

Oh man I love how it has that little bubble sound at idol!

Love how you got fans on in your garage and I have the heat on in mine! 😂

Man my dream is a v-twin lawn mower with a sidepipe that has only one muffler under the chassis and then straight pipe out the side then i would pulley FLIP not swap it and then basically i would be happy. Im still pretty young. But i had a lawnmower but the rod snapped after the 4th day of driving. I have to say it was F U N while it lasted. Ive been searching a lawnmower since.

SUBSCRIBED!! Great video! I'm about to retire and I have 5 grandsons, 1adventureous granddaughter and 12 mowers out back. If only I could figure out how to combine the two. 🤔 I think you gave me an idea!

Good find, that is cool!

Lt1000s are a good platform for modifying. My racing tractor is an lt1000

Hi Chud. It's Raymond on my dad's account. Thanks for the shoutout!! I am wondering what kind of fuel you use in your mowers. If you don't use premium, I've found it's a good idea to because it helps keep your carburetors clean.

awesome!

When briggs and stratton made the vtwin mufflers pop off with 2 bolts they were just screaming straight piped it.

On those mowers you can run a 5 inch front pulley max without mods. I also think it needs a gas pedal, and I see a missing front axle bolt at 32:40. Pretty sick build! I need to make a custom exhaust soon...

I guess you'll have to go to Wisconsin to buy belt , (you know with inflation in all)

Hey chi’s 327. What about a turbine powered race mower

What a cool build! With time and work ethic, i hope to do things like this too! I've gotta learn what im doing first lol - also - how do you get the speedometer on your phone?

I got a older john deere 111 that im making into a mud mower, engine runs strong but the carb is junk, i was thinking about putting a atv style carb on it, would you have any suggestions or advice on it?

I am wondering why you don't weld up the differentials to make your mowers positive traction?

the bad starter was a vanguard unit.

I love vtwins but the extra weight does make them handle differently.

I have a like new starter off a 24hp vtwin if you need it?

Where do you find your lawn mowers?

#TRUEFAN

My mower only runs on choke please help 😅 kohler 19.5 magnum v twin

Have you ever took you're mud mowers at a gas station before

The name of the new mower should be rusty

I think I'm first!

“Papa, why is that man mowing the sand?”

I love your mower build videos there my favorite one's.

I think you are officially 'the mower whisperer'!

I was wondering what kind of pulley setup do you have for mud mowers I dont really want to go too terribly fast

Nice to see hard work and patience rewarded.

I had no idea you were in Callahan, I have family that lives up there. I am in Jacksonville, just down the street from you. So many RU-vidrs here in Jax/Callahan.

I have LT2000 that I drive through woods

That sucker sounds like a Beast id ride the wheels off with you if i lived around you id bother you every day hey lets go ride Mud Mowers and ride some wheelies 😂😂

Do you have any master chiefs in your fleet? That would be appropriate with àll the Navy and Coast Guardsmen in Florida.

My first lt1000 with a vtwin had a rear gas tank like that.

I beat pullys off just like that.

Could you do a video on replacing the ignition tbh I’m going in to this blind just wanted to make my first project I also wanna learn how to install a battery

I haven't read the comments but I seen the end of the video you talking about the mini bike I may be way behind but build that thing come on brother lol

Your mud lawnmower tractor sounds awesome with the powerful v8 engine power 😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎

If you don’t mind saying, how much does your tire changer cost? Because it looks really handy

LT Johnson and the new mower looks the same a bit similar what do you think of the both

My last name is bender. It is german. Would you please call is Spc Bender?

With the shape my mud mower is currently in it probably will be like $200 lol

That thing is a beast! Great video chud!!

Sup Chud 👌

Absolutely love these videos. Hopefully, I can get that good at repairing engines Cause right now I suck.😂

Do you find that your axle seals leak when running higher speeds?

I was just wondering why you always run the straight pipes. Is that something you need to do on a mud mowers. It just seems really loud to me. Thank you! Happy New Year my friend 🎉

How do you make them go faster without swapping the engine

I got the same mower LT 1000 that burns oil really bad blows smoke bad any idea what it is? I Don’t use it anymore would be nice to fix it

The gas pedal and cable is mounted correctly on a 24hp intek. But the governor takes much of the fun out of things 😂. I like your method of bypassing that nasty governor. My question is , is it OK to disable the governor and leave that steel deal spin its ass off with no arm ?

I love tractor / ag tires❤❤

How do I fix my mud mower if I start it and then I let go of the clutch and it’s a neutral and the belt spins around with the pulley how do I fix it?

All you need now is driving lessons

You are most welcome you are very clever❤❤❤❤❤❤❤❤

You should build a Craftman Dyt4000 as a mudmower build but make it able to go in super deep water. Snorkle,raised Exaust and seal the transmission and seal engine, be a good test

Carrollton where? I'm 30 mjles.frkm Carrollton Ga -USA...I have 2 LT1000's, one named Cain, and one Abel. Abel is a stock mower, waxed pretty, 17hp, present from my pastor. Cain is a legendary bastard, deck removed, dozer blade from an old water heater and bedframe angle iron, angled and liftable with the deck arm, atv tires 22" and similar up front, 75 lbs of barbell weights bolted to the rear plate, 18.5hp briggs, and the 22" tires full of water and isopropyl for winters here. The cheap chinese LED's in front aren't impressive, but with 110' tree canopy and a bazillion leaves, i can push them into 8' high rotpiles that are 6" by fall, push gravel, dirt, and mulch all year. Wish i had your 6" pulleys; i never need my lower 3 gears!

Hey chud it’s been a while since I’ve commented but I’m still a huge fan have been for a while. I love the projects and I can’t wait to see the next build. Also red s10 update?

That’s some bad stuff and love the mower video 🤟🏼

That broken WD40 can 😅 I know we've all been there.

YES, WE WANT TO SEE MINI BIKE

Yes on ReStore in the mini bike😮

where do you get that tractor tires ?

I need some tires

Thanks so much for the shout out!!!!!

@chud327 nice video! Stoked to see this V twin run so good! Im hoping the one for blue sounds and runs like this one you have.

So you went from a 9" pulley to a 5" pulley and the belt was 95" and you went to a 90". So if you take the inches you took away from the pulley and take them away from the belt the math should be: 9-5=4 and 95-90=5 with the inch shorter. So when i pulley swap mine with a 3" rear, i should probably use a 88" belt. Because 9-6=3 and 95-6=89 and you had to use an inch shorter.

you need to find a deck with it

You should build like lawnmower that pull for wood with or a trailer. And some how make a four wheel drive lawnmower

I didn't know you went to Oconto WI. I live there. That's pretty cool.

Just found your channel, had to subscribe. Always wanted to build a tractor. Your video was very inspirational.

Just wanna say you sound like a really down to earth good guy, keep up the good stuff man

Do a mini bike video

How do you find all these mowers for so cheap

I had a friend years ago that built drag mowers, his nickname was rattle trap

Nice mower

@chud327 So you only did 2 things to make it faster? 1.cut the muffler off. 2. changed the pulley from a 9" - 5"? I have 2 LT1000 a 16hp and a17.5 hp intec. Would really like to get a set of them tires but have no clue where I can even find them? are they 4 wheeler tires?

Awesome bud! Keep it up man, you made me get back into the hobby lol!

Very nice❤❤❤❤

Fix the mini bike

reminds me of my lt1000, just like lt johhnson but not as nice, and has a v twin

You should lock the diff

Mud1000!

what size is the front tires you put on?

I wish I had a chud 327 sticker for my mower

You help me out with stuff that I did not know

How is it going

Where r u it looks like it's still nice out there here in northwest Michigan we got Abt 7 inches of snow

🦃🎄🎄⛄☃️

So what is the top speed?

Awesome video Thank you for the video

Luv ur vids bro keep up the good work

Nice man

Awsome gas throttle setup and it idols great.

If you build that mini bike, you will have to call out Isaac, Charles and John, and race them at Mini Mayhem!

Sweet mower! What do you think of those front tires? Im thinking about ordering a set for my mower just wanted to hear opinions on them first haha

Work on the mini bike!!!!!