Building a Free Murray Mud Mower 

I'm not sure if you know this, but you're sitting on a gold mine with that tractor. It has a peerless 820 transmission. These transmissions can go for as much as $700 new! And they are extremely heavy duty

I think major Murray is my favorite mud mower now! It looks so good

I think I like the colonel more honestly just a bedder looking body but major is definitely on the come up great work as always chud🤙🏻

locked back axle sounds good, pear that with a bigger front pully for better belt grip and speed! your on-to a winner

Thanks for the video nice tractor you build are can't wait for the next video

That thing sounds mean! Great video! Can't wait to see more!

We finally get to see major Murray in action!

Awesome chud! That came a long way! Now time for pulley swaps front bumpers and light bars!

Really nice good job on this mower keep up the good work

It's just too much fun. Cool cool builds

Usually open headers usually sound awful. But something about this one sounds so good

Great videos Chud327

Nice build- enjoyed watching

I think both mowers need custom gas pedals as well. And if you ever want to unseize an engine spray PB blaster in the spark plug holes and then turn the flywheel nut with a breaker bar. This method has worked great for me. I think I remember the Troy bilt was a 17 hp too. Great video!!

These videos are so relaxing

Another great video chic 327 keep it up buddy😎

been watching you for a while, finally had the drive to pull out my craftsman YT3000 over the summer and get it running. mice ate the ignition wiring, cleaned that up put a 5 inch pulley on the trans and some nice 19 inch sunF mud tires on the back (14mph top speed with gas pedal). makes a nice trail cruiser. AND i can still mow with it

I think dual stacks coming out the hood would look awesome

Nice video

HEY CHUD, ITS LONNIE. LOVE THE NEW MOWER BUT COLONEL CRAFTSMAN IS STILL MY FAVORIT MOWER ON RU-vid.

Good looking mower

I like the potential in this one 👍

Great build my friend!!

Dude has a Huskee in the background and I wanna see content on that

I know this is a old video but I salute what you do brother and I am definitely a subscriber 💪🏿💪🏿💪🏿

Love the rev's at 17:40! Also that's a nice Tractor! I don't have even close to as much of a tractor as that (I've got a little MTD Transmatic Transaxle 14HP Tractor), but I kind of want to turn it into a mud mower like yours. Just need some better tires, weights, and determination! Hope that tractors doing well for you. Looks like a beast!

This guy is interesting to watch idk what it is but you do some very good work keep it up man

Your videos are so cool

That troybilt ought to be really kickin but kinda strong

Open header Vtwin engines sound friggin amazing. Don’t get me wrong it’s really loud, but put some ear muffs on and have fun lol.

i made my 454 big block joun deer waching ur videos thanksw for the inspason

Just so you know the transmission in that tractor is EXTREMELY EXPENSIVE and the engine as a whole probably has enough power to be a 4x4

Does Major Murray have a Peerless 820, I know that was common in those machines?? Something a lot of people get confused about, the seat safety does not play a role in starting the machine, it's the clutch safety, the seat safety is only for the mower deck.

That cool

i wish i had a lawn mower like you

Just a suggestion how about making major Murray a 4x4

I’ll watch your videos really want to build one thanks

Intro: ghost ride my mower while pulling another mower. Chud: gotcha

You should do dual stacks out of the hood and a metal seat like CC.

Let that read...'.good.'

Bad ass!!

My Brother gave me an old V Twin Western Auto mower and I've watched every gas pedal video I can find but I'm not as swift as I was 20 yrs ago. I'm just not getting it. I'm a diabetic and on disability so my one good eye don't see too good. I use to build Hot Rods in my younger days but I saw a video of a Rat Rod Mower and fell in love. Then I saw one of your Mud Mowers and I have a New Passion. Could you do a more in-depth one on a pedel for a V Twin carburator. Talk SLOW cause I don't listen very fast 😂. LOVE your videos Bro.

I have a 1993 Murray 46209 that looks a whole lot like Major Murray, same square hood and same color. Has a Tecumseh engine and a Peerless 930-033 transmission. I need to pull the deck lift control and the blade engagement control levers off as I no longer run the mower deck

I’ve decided this is what I am doing to my craftsman with a 26 hp Kohler engine

I can’t wait to see it back and re built, maybe you can put a rear rack on it?

You just has to get those tires muddy didn't you ? This is morphing into a fine looking machine !

Would be awesome to have a dual tractor exhaust setup. Two mufflers on each side with the rain flaps

Great livestream! Keep it up!

U Should invest in some Kenda executioners for that thing would look great

Chud its me mud_man u need a light bar like my poulon

i love the hood

Have you ever had any garden tractors?? I think you should buy a few of those. The bigger models have yanmar diesels in them

If you want that motor to idle low pull the idle spring off but not the governor spring .pulling that spring off makes them idle like a Harley

Make an offroad course!

darn, that sounds like a v8!

have any of your mud mowers needed 20x8 tires? i can't find any 20x8 tires anywhere

Harley tailpipes on a v-twin could be cool.

Question: Could you replace the drive gears and belt for a set of gears and a chain similar to a bicycles?

Nice video, but i am missing the gopher...😄

i have one of those double barrel carbs. but the intake wont fit my vanguard. my only virtical v-twin... witch has a broken beyond repair carb. but i am not without plan! gonna 3D print carb addapter to take one of my spare oppy carbs!

I just got my lawn mower fixed I had to get a new starter.

Is that axle positraction? Real ood job!

Would look really cool with more aggressive tires on the back

Can you tell me if a 1979 cub ih 81 with a manual 3 speed is good for mudding pls??

The Black Padded seat would be a little better.

what about a winch?

Was that carb from the Briggs in the old huskee? Sounds like you got it dialed in.

Have you went out to the Osceola national Forest yet I know they got some good trails to ride and you could camp out there would be a great video when you get time

Where can you get rims, to up your tire size. My son has 18x8.50-8, wants to go up to 20 on GTX 46. Thanks in advance

yeeeeeeyeee

Ohhh poor oppy

Ive got an alco concord ride on which i want to pulley swap, but i cannot because of this locking mechanisim for the mower deck which has been taken off.

Make a grader/plow blade for any mud mower that you haven't pulley swapped yet It can't be pulley swapped because it needs that lower gear ratio

What kind of mower is this I can not seem to find one

DO it desert Tan

When are you going to paint the rest tan?

I've got a 17.5 horse john deere d105 with the variable pulley transaxle runs as fast as my zero turn stock and I'm just curious if I pulley swap from the 3 or 4 inch it has on the motor to an 7 or 8 in just how fast it could run

My motor blew. Can I put a push mower motor on it?

Is that white lawn mower in the back a statesman

Did you lock up the transaxle?

What model murray is it

I've got a murry super bee I'm wanting to speed up and drop low

How did you get it for free

What is the color that you painted the rims with

I have a craftsman lt 1000 with a Murray Briggs 18.5 opposed twin .. I need ideas

What is the model number of that rider?

my name for the new tractor is Hydro

Major patiot murry

I am starting to think that the old videos that troy bilt had that same engine and now it is on major murray

do gun metal or mate black with desurt tan wheels and seat or some

i have a craftsman yt 3000 do you now where i could get a engine? Ps it blew up.

Mayjor Kane

Se puede hacer que con un motor 15.5 de mas velocidad

Phil

Why does it sound like a old ford truck

Torque convertor...........................

Aj please

Major headache.

I want to straight pipe my V-Twin mud mower but I don't know how to do that without burning out the valves