Тёмный

$80 INTERCOOLER PIPE KIT! -RSX BUILD PART 5 

Texas Honda Channel
Подписаться 52 тыс.
Просмотров 12 тыс.
50% 1

LOW BUDGET $80 INTERCOOLER PIPING FOR K SERIES TURBO BUILD!If u like these videos please share them around so we can grow the channel! Don't forget to like and subscribe!!
Jackspania intake temp sensor weld in for k series
jackspaniaraci...
Discount code TXHONDACHANNEL
This description contains links to eBay affiliate I get a small commission off each sale and I’m required to let you know. Feel free to browse the links below.
CHEAP DIY intercooler pipe kit!
ebay.us/mky0sg
Vibrant BOV Flange
ebay.us/NlidU0
order 3 inch to 3inch straight coupler
amzn.to/3W7hUSW
3 inch 90 degree pipe for upper intercooler inlet
amzn.to/3W3CTpn
i ordered 2 of these 3 inch to 2.5 inch straight adapter couplers
amzn.to/3DvVPWO
i ordered 1 of these 3inch to 2.5 90 degree
amzn.to/3SxKKsl
3 inch T bolt clamps i ordered 3 packs of 2.
amzn.to/3gJDYm1
Discount code:TXHONDACHANNEL
jackspaniaraci...
INTERCOOLER WITH THE MOUNTING ON IT
jackspaniaraci...
TURBO KIT IM RUNNING
jackspaniaraci...
Copyright free music info by Kingshock
/ @garden_state_grandeur
/ gardenstaterecordsllc
Click here to subscribe to my other Channel 100K GIVEAWAY TIME RUNNING OUT!!
/ jamesdguy
Message me if you need to reach out! I'm here to help however i can!
texashondachannel
For merch contact me at
moore_motor_sports@yahoo.com
/ texashondachannel
texashondachannel For faster response use instagram.
Follow on tiktok @ texashondachannel
Here is a link to my other channel
tinyurl.com/y2...
Here is a link to my Instagram
/ texashondachannel
If you wanna donate to the build here is a link
ANYTHING HELPS ME GIVE BACK TO Y'ALL!
paypal.me/moore...
LIKE AND SUBSCRIBE! IT HELPS THE CHANNEL A LOT!!! GOD BLESS
#kseriesturbo #budgetfriendly #lowbudget

Опубликовано:

 

1 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 83   
@hahnmowermotorsports179
@hahnmowermotorsports179 Год назад
I can’t believe your fabricator didn’t grind the anodizing off of the bov flange. I’ve welded several of the eBay flanges for customers and they weld just fine and don’t have all that contamination if you just spend a couple more minutes cleaning and prepping..
@twgs1911
@twgs1911 Год назад
Welder not taking his job seriously if you ask me you can always grind of the coating just like you would grind aluminum before you weld it hope you didn’t pay more then $15 for that
@sinformant
@sinformant Год назад
You should definitely bring the other pipes you cut in to him so he can bead roll them so they dont pop out under boost
@TexasHondaChannel
@TexasHondaChannel Год назад
Yea he did the one pipe and now I want them all done. My 30psi d series build didn’t have bead rolled and a few times they popped off so they would have fixed it haha
@dimitrisxalkias7815
@dimitrisxalkias7815 Год назад
Very good work. But I have a small objection, as a reference the pipe, which ends in the upper slot of the intercooler, with two 90° angles. It would be preferable if the end section were glued at a 45° angle, upwards towards the intercooler socket, with a 120° elastic joint.
@akhir_s1484
@akhir_s1484 Год назад
The pipes in white looks so cool and different from typical turbo builds.
@TexasHondaChannel
@TexasHondaChannel Год назад
Most people just put the pipes on and run it but I figured why not give it a little custom touch I think it looks pretty good too it also doesn’t affect the cooling as much as people think it does most factory radiators are coded in a black paint and I didn’t put the coats on super thick or anything so it still works good intake temps aren’t very high
@BulliKid
@BulliKid Год назад
Good work brother. Used a eBay intercooler kit for my turbo civic also. Just have to be a little creative.
@ahmadamir1694
@ahmadamir1694 Год назад
Hell yeah man, looks amazing! If only I saw this video before going with my $550 piping and intercooler kit that I had to modify anyway. Paid someone $150 to modify and weld it. SO I spend a total of $700 for the intercooler piping... Compared to less than $200 with yours. Great content man! Keep producing, you're gonna make it up there!
@TexasHondaChannel
@TexasHondaChannel Год назад
I hope this video helps someone trying to get theirs done on the cheap. I got welds done free so that helps and already had BOV and intake temp sensor stuff so it cost me about $130ish which is still cheaper than anywhere else to find 2.5inch pipe kit. They only have 2 inch and 3 inch but not the 2.5 which I wanted lol.
@kurtbennett1164
@kurtbennett1164 Год назад
Brother it seems that when you remove the couplers to weld the pipes you have not provided enough pipe inside the couplers to touch tip to tip a nd be welded? Or am I just not seeing it?
@TexasHondaChannel
@TexasHondaChannel Год назад
There is enough pipe inside I have them touching inside the couplers.
@TheFilmNerds
@TheFilmNerds Год назад
I used the same piping on my 8th gen si, fir great!
@TexasHondaChannel
@TexasHondaChannel Год назад
Awesome!! Hope it helps others save some money too!
@savcandrive
@savcandrive Год назад
Looks good! keep going! 🏁 almost time to tune! 💯
@TexasHondaChannel
@TexasHondaChannel Год назад
Yes sir! My good friend Eric at AGN tuning will be taking care of me on that 😎
@sinformant
@sinformant Год назад
Hope you had the car battery disconnected before welding. A lot of times it can fry the ecm and possible other sensors and modules. Sometimes you may get lucky and not have an issues. Also kudos to you trying that alumiweld. You did pretty good for never doing it before. I have never tried that stuff before.
@TexasHondaChannel
@TexasHondaChannel Год назад
I always think about the battery situation I didn’t this time around. Thankfully it’s all working!
@PAUL4DR
@PAUL4DR Год назад
James another great video this build is actually helping me out on my 7thgen civic im planning to boost it this season just got the maxspeed turbo today love your content keep it up uve inspired me for my build on my channel god bless bro
@TexasHondaChannel
@TexasHondaChannel Год назад
That’s awesome glad I could be some help! God bless you!!!
@bobbydelamar606
@bobbydelamar606 Год назад
RU-vid just asked me if this channel was a good recommendation for me. Heck yeah! 👍🏻
@TexasHondaChannel
@TexasHondaChannel Год назад
Thank you for that! It’s a hard world being a Christian RU-vidr with values and morals. Appreciate it more than you know.
@theg-zguy5268
@theg-zguy5268 Год назад
Nothing wrong with the diy kit's Used several times in the past without issue. Nicely done ✔️ 👏
@bobmiller7426
@bobmiller7426 Год назад
This looks really good. Not bad for $80! Always enjoy your content.
@TexasHondaChannel
@TexasHondaChannel Год назад
Thanks and i agree! Really cheap compared to the other options.
@512films7
@512films7 Год назад
I’m excited to see how much power it makes! Also those wheels will make it loook killer 😎
@TexasHondaChannel
@TexasHondaChannel Год назад
Right!?! That’s what I’m saying!
@dandandan785
@dandandan785 Год назад
looks sickk!!! Its all coming together you gotta powdercoat the compressor housing white!!
@TexasHondaChannel
@TexasHondaChannel Год назад
I know a guy 🙏🏻
@maggy-lu2569
@maggy-lu2569 Год назад
Great job brother 👏 your car has came along way may God keep blessing u 🙏
@TexasHondaChannel
@TexasHondaChannel Год назад
Thank you 🙏🏻
@Adaptive_riding
@Adaptive_riding Год назад
Do you have any fitment issues between the wastegate and the heater core hoses? i’ve heard some people have to either modify the housing or get an aftermarket one for the wastegate to clear them
@TexasHondaChannel
@TexasHondaChannel Год назад
I will do video of coolant routing soon as exhaust is done hope that helps.
@cherokeemary9654
@cherokeemary9654 Год назад
Hey James I have a spot on my project truck that is rusted out on the lower bed it's a small area like 3" by 3" and I was wondering can I use that rod stuff you used and a torch to apply a patch panel because I don't know anything about welding. Any help would be appreciated. Rsx looks awesome.
@apuid2580
@apuid2580 Год назад
i would say probably not, you can get an extremely cheap mig welder on amazon for sub 100 dollars and it should do the trick just fine.
@TexasHondaChannel
@TexasHondaChannel Год назад
That’s for aluminum so probably not.
@PNDASnipin
@PNDASnipin Месяц назад
Where is rst located and how much did the entire job cost to have welded
@joshuaspeights3092
@joshuaspeights3092 Год назад
I do enjoy your videos and this Rsx I have one myself here in garland tx but I have no nice compliments for your welder sorry not sorry 😊
@horlly6155
@horlly6155 Год назад
Good job the build is looking clean.
@TexasHondaChannel
@TexasHondaChannel Год назад
Thank you 🙏🏻
@GlassWerx
@GlassWerx Год назад
Lookn good. I'm ready to get back started on mine again
@TexasHondaChannel
@TexasHondaChannel Год назад
It’s been hard finically for us all and makes content hard to make at times but hope it gets better for us all soon. You keep up the good work your doing too man!
@GlassWerx
@GlassWerx Год назад
@@TexasHondaChannel appreciate that. I definitely understand the financial deal. Same here with us.
@PhillyDee215
@PhillyDee215 Год назад
On a build like this how much horsepower would an intercooler add
@TexasHondaChannel
@TexasHondaChannel Год назад
Well without a intercooler you can’t run turbo… I mean you can but you don’t won’t make power long due to hott intake temps and blowing the engine due to heat! Different intercoolers can support more power but it’s not the intercooler that gives horsepower it just cools the hott air down.
@PhillyDee215
@PhillyDee215 Год назад
@@TexasHondaChannel 🤦‍♂️i was totally thinking supercharger Aye but now I wanna sketch my name onto my intercooler. Wanted to think you for that idea too😉
@TexasHondaChannel
@TexasHondaChannel Год назад
@@PhillyDee215 haha no problem 😎👍🏻
@gotthatdawg-lh8yb
@gotthatdawg-lh8yb Год назад
@@PhillyDee215 supercharger stills needs intercooler too...lmao
@thedanbot85
@thedanbot85 Год назад
Getting so close!!!
@TexasHondaChannel
@TexasHondaChannel Год назад
Yes sir! It’s getting exciting!
@skyline34x
@skyline34x Год назад
Nice job had a quick question what clutch set up are u going to run ?
@TexasHondaChannel
@TexasHondaChannel Год назад
It already has a light weight flywheel and race clutch. Not sure what it is but it held 301whp perfectly fine so not sure it’s limit but I’m positive I will fine it’s limits. Not sure on all that stuff yet
@skitzo4215
@skitzo4215 Год назад
Car is lookin good bro!
@TexasHondaChannel
@TexasHondaChannel Год назад
Thank you 🙏🏻 appreciate it
@jwagon85
@jwagon85 Год назад
Car is coming along nicely bro.
@TexasHondaChannel
@TexasHondaChannel Год назад
Thank you 🙏🏻 your more than welcome to come take a ride when it’s done.
@jwagon85
@jwagon85 Год назад
@@TexasHondaChannel oh man thanks 🙏
@phillipstanfill5392
@phillipstanfill5392 Год назад
Man looks like alot of work
@TexasHondaChannel
@TexasHondaChannel Год назад
Well to save some money it’s worth it. Now they do sell a pre fit pipe kit for $150 but it’s 2inch which is really small pipe size and I’m not wanting that small. They also have a 3inch but it’s $700 so I made my own way cheaper lol
@tee_gunna504
@tee_gunna504 Год назад
🔥 👍
@joshuacisneros3501
@joshuacisneros3501 Год назад
My bro is that JC in kansas ? Looks familiar
@TexasHondaChannel
@TexasHondaChannel Год назад
I lived in Kansas years ago but I’m not in Kansas I’m in central texas.
@austinsproul2656
@austinsproul2656 Год назад
What song/beat is this? @5:00
@Behold876
@Behold876 7 месяцев назад
Bless you too brother!
@josenevarez2088
@josenevarez2088 9 месяцев назад
What kind of white spray paint did you use for intercooler piping. Did you use heat resistant paint
@johnnymoody2740
@johnnymoody2740 Год назад
Looking good. Those new wheels would look good painted white and gold 👍👍
@TexasHondaChannel
@TexasHondaChannel Год назад
I like them how they are but white and gold is a good idea too! I first need to see if they fit properly then go from there.
@johnnymoody2740
@johnnymoody2740 Год назад
@@TexasHondaChannel They look good like they are tho. I was just thinking about matching the car 👍
@TexasHondaChannel
@TexasHondaChannel Год назад
@@johnnymoody2740 yea i got you! Thanks for the input btw. Appreciate it
@tripleg139
@tripleg139 Год назад
💯💯💯💯
@TexasHondaChannel
@TexasHondaChannel Год назад
💪🏻😎
@almarbennett6427
@almarbennett6427 Год назад
Do you have a link for that engine tuck harness. Looking for one that runs from the ecu to crank side sensors to injectors then everything after.
@theusedblink
@theusedblink Год назад
Looks soooo good
@TexasHondaChannel
@TexasHondaChannel Год назад
Thank you 🙏🏻😎
@wrx531daniel531
@wrx531daniel531 Год назад
great job 👏 👍 👌 🙌
@TexasHondaChannel
@TexasHondaChannel Год назад
Thank you 🙏🏻 more to come! God willing!
@valmorefaria195
@valmorefaria195 7 месяцев назад
Excellent job loved the idea of what you did with the U pipes very smart, i did this exact same thing on my 06 civic si thanks to this video, saved a lot of money on intercooler piping, thanks man !
@jasonjr2500
@jasonjr2500 5 месяцев назад
How is the pipe doing? Thought about using it for my truck I’m putting a turbo on (probably only run 5psi for now) but the truck the turbo came on from factory didn’t have a intercooler idk if I need to put one. It’s a diesel truck turbo going in a gasser
@StreetWorxx
@StreetWorxx Год назад
Awesome video bro can’t wait for the dyno
@TexasHondaChannel
@TexasHondaChannel Год назад
Yea bro same here!!!!
@CadenFloriana
@CadenFloriana Год назад
How do I do the vacuum lines
@isaiahpeters6432
@isaiahpeters6432 Год назад
🔥🔥🔥😇😉🍻🍺
Далее
Why This Tiny Honda Engine Can Make 1000hp
16:40
Просмотров 4,9 млн
RSX Intercooler piping kit
17:00
Просмотров 2,1 тыс.
ХОККЕЙНАЯ КЛЮШКА ИЗ БУДУЩЕГО?
00:29
Ко мне подкатил бармен
00:58
Просмотров 186 тыс.
Как открыть багажник?
00:36
Просмотров 14 тыс.
The Differences Between Honda K-Series Engines
12:38
Просмотров 703 тыс.
RSX TURBO INSTALL- PART 1
7:23
Просмотров 19 тыс.
How to choose the right turbocharger || EXPLAINED
12:47
93 OCTANE MADE 443WHP STOCK K20 & STOCK FUEL SYSTEM.
14:50
Intercooler Piping Turbo K24 Integra
13:10
Просмотров 7 тыс.
ХОККЕЙНАЯ КЛЮШКА ИЗ БУДУЩЕГО?
00:29