✨ Microwave Counts Down - But Won’t Heat - Easy FIX ✨

Quick and Easy - 5 Minute Appliance Fixes

Подписаться 52 тыс.

Просмотров 20 тыс.

50% 1

✨ Microwave Counts Down - But Won’t Heat - Easy FIX ✨
How to easily replace a broken door switch.
😬CAUTION: CAPACITOR HOLDS A DANGEROUS CHARGE. MAKE SURE NOT TO TOUCH IT.
Click here to order a new microwave door switch: amzn.to/3SicHVL
✨ If the video was helpful, remember to give it a Thumbs Up 👍 and consider Subscribing. New videos every Saturday ✨
▶️-Subscribe Here: / @quickandeasy5minuteap...
🛠-Do You Need Any Additional Help? Become A Member of Our Channel Today and Get LIVE HELP from Scott With Your Appliance Repair. Pick #1 FIX-IT FAN for Just $4.99 and get Text, Zoom, Email or FaceTime Live Help. Non-Members pay $45.00 for Live Help. Just $4.99 for Channel Members. Click Here to Join Today: / @quickandeasy5minuteap...
💻-Website: www.ScottTheFixItGuy.com
📖-Like us on Facebook: / scottthefixitguy
🐥 -Follow us on Twitter: / scottthefixitgy
🌎-Instagram: / scottthefixitguy
-👀See our RU-vid Channel: / quickandeasy5minuteapp...
🙏-If My Advice Has Helped You…
Please Click Here To Donate: www.paypal.com/cgi-bin/webscr...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
🔌-Good Multi-Tester: amzn.to/3Mvw1ML
Need Extra Help with Your Appliance Today - Click Here:asqme.com/@scottthefixitgu
⚙️-Good Place to Buy Parts: bit.ly/3wD4L5W
🧰-List of Tools used by Scottthefixitguy: • ✨ Scott The Fix-It Guy...
- You Can Fix Your Appliance Yourself and Save $$
Disclaimer:
Because factors beyond the control of Scottthefixitguy, I cannot guarantee against improper use or unauthorized modifications of this information. Scottthefixitguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Scottthefixitguy recommends safe practices when working on appliances and vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Scottthefixitguy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Scottthefixitguy.
Thank you 😊 I’d Like To Thank All The Awesome Viewers That Have Supported This Channel By Subscribing or Joining as a Channel Member.
Thank You for Your Very Meaningful Support😊🙏 🐔 Check Out Our New Channel Dedicated To Showing How To Raise Your Own Backyard Chickens: / @raisingbackyardchickens ***
***
Quick and Easy - 5 Minute Appliance Fixes Do you need More Appliance Repair Direct Help from Me? Visit me at: AsqMe.com@ScottTheFixItGu

Хобби

Опубликовано:

26 сен 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@daniloespiritu6072 21 день назад

Thank you

@QuickAndEasy5MinuteAppliance 20 дней назад

You’re welcome 😊

@ruthheller5696 Год назад

Excellent and thorough!

@QuickAndEasy5MinuteAppliance Год назад

Awesome Ruth, I’m so glad it worked and saved you time and money 😊 I hope you’ll click here to support us by joining our Channel: ru-vid.com/show-UCGpInAejvpfVVE4FHB_L-Dgjoin You’ll get Live Appliance help when ever you need it.

@kathleenreeves1193 8 месяцев назад

Interesting - Thanks!!!

@QuickAndEasy5MinuteAppliance 8 месяцев назад

You are welcome!

@drewrinker2071 3 месяца назад

I Have that same model as you at work and I thought it was the door switch as well, the problem wasn't the door switch, it's just that Panasonic didn't give the switch assembly enough support to the frame, so when the door closed the whole switch assembly would flex with it on the inside, not allowing it to fully depress, what I did to fix it is open the door, then drill a hole through the front part through the frame where your switch assembly would be on the inside, and through switch assembly and ran a 8-32 flat pan head bolt through securing the frame to the switch assembly with a nut on the inside ( this is how most microwaves are anyhow and how I got the idea) and problem solved, switch assembly doesn't flex anymore. Panasonic's like yours and mine are prone to this problem though. It just flexes on the inside 😂😂

@QuickAndEasy5MinuteAppliance 3 месяца назад

Great fix Drew, Thank you👍

@UUGambler 7 месяцев назад

How would you know it’s a door switch and not something else? Same thing everything works light on fan on counts down but doesn’t heat. Thank you

@fringeminority5676 7 месяцев назад

If everything works including turntable it's down to the HV circuit or the board. Pull the wires from monitor switch, plug your leads from dmm into plug for monitor switch (middle switch) if 120 volts board is good. Then it's either capacitor, diode, transformer or magnetron.. listen before disassembly as you should hear fan then transformer then magnetron. If issue is HV circuit it's usually the magnetron

@UUGambler 7 месяцев назад

@@fringeminority5676 yes, the turn table also works, and the light is on and The control panel fully works.

@UUGambler 7 месяцев назад

@@fringeminority5676 I replaced magnetron. Nothing changed. Still No heat. Everything works, lights, panel, rotation, fan but no heat. Any ideas?

@fringeminority5676 7 месяцев назад

Check diode and capacitor with dmm. The transformer could also be bad. When you run it, do you the transformer hum and magnetron buzz?

@fringeminority5676 7 месяцев назад

What make is it? If it's a Whirlpool they have an issue with the holder for switches, also they now want the 3 switches replaced with 4 switches

@vaporx8713 5 месяцев назад

My microwave starts just fine with lights on and heating and after like 20 seconds the light turns off and it stops heating but it continues the run? any ideas ?

@QuickAndEasy5MinuteAppliance 4 месяца назад

Great Question👍 Click Here to Get Live Expert Help From Me For Just $5.00: ru-vid.com/show-UCGpInAejvpfVVE4FHB_L-Dgjoin We’ll get it Fixed👍

@infofrontline5855 Год назад

dear my oven is not heating i checked all thing but no result, it is running door swt chk motor relay microwave relay magnetron no shor capacitor ok diode checked transformer ok plz tell me wht the issue could be Thanks

@QuickAndEasy5MinuteAppliance Год назад

Nice job, There should be a fuse hiding in there that blew and needs to be replaced 👍

@infofrontline5855 Год назад

@@QuickAndEasy5MinuteAppliance fuse is good also

@Gogia786 7 месяцев назад

Plastic bracket has bottom 3 micro switches, bottom 2 has another mechanish when door close both microswitches dhould be pressed butvthey r not completely press thats the issue

@jasongonzalez7959 6 месяцев назад

How did you fix

@Gogia786 6 месяцев назад

@@jasongonzalez7959 that door switch i changed did not fixed the issue...😭 seems to my opinion its motherboard relay or some other motherbisrd ic faulty.basically my opinion its not door switches ...its faulty motherboard....i put aside that microwave and had another one in my storage... using that one.