😵E-fliteTwin Timber Shock! RC Planes First & Last Flight on the Same Day?

Подписаться 47 тыс.

Просмотров 19 тыс.

50% 1

@horizonhobby
PUT IN THE COMMENTS WHAT YOU THINK CAUSED THIS!...*UPDATE: On 6/6/2023 I heard back from Horizon Hobby Customer support after having to mail them back the crashed airplane for "Inspection" I am happy to report they are sending me a NEW Twin Timber!!! Thank you Horizon Hobby!
as of 5/27/2023 I just put the elevator servo on my servo tester and it is DEAD! All other servos worked properly even after the crash...bummer! Will report to Horizon!
eflite,eflight,flight,flite,e-flite,e-flight,horizon,hobby,twin,timber,twimber,1.6m,1.6,avian,esc,dual,thurst,reverse,as3x,safe,nx10,nx,sensor,assisted,envelope,artificial,three,axis,stabilization,blue,white,leading,edge,slats,differential,thrust,soft,tundra,tire,suspension,spring,counter,rotating,flap,spektrum,air,plane,aero,stol,short,takeoff,landing,take,off,new,EFL23850,EFL23875,1600,mm,1615,3200,mah,4s,3s,lipo,lithium,pack,smart,750,kv,35,36,brushless,motor,servo,metal,gear,a332,637,637ta
00:00 Introduction
00:37 Airplane Info
01:54 Take off
02:40 Trim Flight
03:30 In-Flight
05:10 Slow flight
07:01 Danger strikes
07:13 Crash
07:42 After action review
08:20 Shes not pretty anymore

Кино

Опубликовано:

13 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 174

@RCPlaneReviewer Год назад

.*UPDATE: as of 5/27/2023 I just put the elevator servo on my servo tester and it is DEAD! all other servos worked properly even after the crash...bummer! Will report to horizion! UPDATE: 6/9/23 Horizion is going to send me a new Twin Timber after testing and seeing the servo was in fact bad! Appreciate it 🙏 Horizion!

@tyesai Год назад

On my Timber X I've had the rudder servo, both flap servos, an aileron, and last night the elevator servo fail. I landed every time with zero damage until the elevator servo failed last night. This over the course of 18 months. I'm not impressed...

@RaGeRC Год назад

You can lose pretty much any other servo and still be able to land but lose that elevator and your just along for the ride at that point!

@RCPlaneReviewer Год назад

@@RaGeRC and that's exactly 💯 true

@JDDupuy Год назад

Horizon Hobby cheap parts. But they charge you a high price! And they know it!

@FORDEVR Год назад

@@JDDupuy Everything is good for me except the servos. They are poor quality. I also had a engine mount crack on my extra 300 with no crashes.

@mikeyfourbarrel8473 День назад

This is the first time I can remember hearing a pilot say "good weight" and mean it sincerely. :D Awesome content as always. Im new to the channel and really enjoying going back to some of the older content.

@RCPlaneReviewer День назад

Really appreciate you checking out the content, its cool to see the progression

@keepyourairspeedup Год назад

He just said 😂 ain't nobody got time for that too funny 🤣!

@jacksonrcaviation Год назад

It is what it is indeed my friend, have a blessed day😎🇺🇸

@phillipiacobacci1369 Год назад

Now that hurts, I even felt the "oh wt******" Sorry about that my friend. This morning at the flying field we had one plane that just lost its ailerons, and I do mean lost them. They came off mid-flight. Those things can do what they do and that’s sucks.

@tughillrc6327 Год назад

Reckum Roy Knows that impact sound 🎸🎸🎸🎸🎸🎸 Sorry to see such a great plane crash. Better luck next bird.

@BillKisel Год назад

I know this is not much consolation but I'd rather crash then have a model fly away on me never to be seen again. Ask me how I know. :>)

@kevinfarley6981 Год назад

Thanks for being honest and real. As to the cause: Pilot error 😋 Cheers!

@RCPlaneReviewer Год назад

Kevin it wasn't pilot error at all as much as you'd like it to be lol, It had a bad elevator servo and was sent into Horizon and they warranted it and sent me a new one. thanks for watching.

@ChrisDavis-eq9lj Год назад

Pretty much same result for my Twimber on 12th flight. All electronics were still functioning, but the elevator servo horn snapped. Elevator started acting weak just after takeoff, tried to make a 180 to get back over our field. Got about 120° before i ran out of airspace. Excellent flying plane until it wasn't. The differential thrust made crosswind landings a little odd. Was sad to lose mine. Thanks for sharing!

@CumbersomeDinosaur Год назад

Interested in what caused this. The stock servo horns look pretty beefy to me on these.

@DAS-Videos Год назад

Part of the hobby. I would always fly my planes until they eventually crashed. Not usually on the same day as its maiden flight. I will google twin timber. Looks like a nice plane.

@freddan6fly 5 месяцев назад

For me such lock up has been once a bad soldering I made myself that got loose during flight, and twice a servo stall, that made the ESC overheat.

@reckemroysrc3764 Год назад

It made a awesome impact noise. I've heard that before 😊

@tughillrc6327 Год назад

Reckum Roys Crashs are the Best (((((((( ROCKS )))))))🎸🎸🎸🎸🎸🎸🎸🎸🎸🎸

@trainroomgary 4 месяца назад

Hi from the Flying Pilgrims RC Club - Michigan - Cool demo - "Like" ✈ but interesting gravity issue!

@RCPlaneReviewer 4 месяца назад

Yep!! Tha KS for checking us out!! Bad elevator servo killed this plane! But horizon got me a new one after they made me send in the crashed parts for inspecton

@mariopires4391 11 месяцев назад

There is no doubt that this "TWIMBER" is an excellent Model Airplane, as is the case with virtually all E-Flite items, especially the TIMBER "series". But.... THE "SERVOS" IN GENERAL - ARE REALLY A BIG "CRAP" 🥵, WHICH IS VERY STRANGE BECAUSE THE "E-Flite" IS ONE OF THE MOST EXPENSIVE BRAND IN THE MARKET. On my 1st flight with my Twin Timber two weeks ago I had a lot of difficulties with the control of the plane regarding the "Rudder" where I had to trim it constantly and finally had to make an emergency landing. I inspected it right away and... voila, the Rudder Servo WAS COOL AND THEREFORE LOOSE IN ITS FIXING!!! On Flight 2, this past weekend, more difficulties controlling the "TWIN" and again an Emergency Landing. Right Aileron SERVO JUST "BURNED"!!!! So Dear Friends, SOLUTION??? TRASH with the Original and NEW BEST QUALITY Servos!!!! Obs. - In my "DRACO" I had to do the same and for the same reasons.JUST LOOSE, COOL IN ITS PLACE!!

@purcellrcaviationchannel Год назад

Sorry to see anyone's model get wrecked... but that was something else! Like you say, that's the hobby. I'd rebuild it and fly the goo out of it, but I understand the desire to just walk away.

@RCPlaneReviewer Год назад

Appreciate you checking us out!

@bsovermars 5 месяцев назад

Happened to me as well, lost elivator control but did have a warning something was wrong. It needed lots of up trim on that flight so I tried to land asp but did not make it back and crashed not as bad as yours. I found the elivator servo cam e unglued so I checked the rudder servo and it basicley popped out with very little pressure. Glue was stuck to servo but none on the foam at all. 7 flights on a $600.00(canadian $) plane thank you Horizon

@CD480 7 дней назад

had this problem on my FMS PA-18, but it did it on the maiden takeoff.. i got about 6 seconds of flight time in...

@RCPlaneReviewer 7 дней назад

Yeah that sucks. Makes ya not belive in the airplane after that!

@holdfastrc Год назад

Same happened to me, picked up one of the only 2 my LHS had and had a freaky maiden (more details on RC Groups Forums) but thanfully after having it sent in, HH took care of me. Ele servos on these are posessed *shrug*

@milesonewheelwinter 19 дней назад

That's a bummer. It happens to the best of us but it was quite entertaining. I'm sorry it was it you're expensi

@RCPlaneReviewer 19 дней назад

Hahaha thats what its all about!! Fun! Its all repaired and flying now

@RubyS.1 Год назад

That's sucks. At least the gear survived as advertised

@RCPlaneReviewer Год назад

Lol that's true!! 😃

@userTJ39780 7 месяцев назад

I have put planes into snap rolls that were severe enough to dislodge a connection from the receiver; be sure to always secure the internals!

@RCPlaneReviewer 7 месяцев назад

It was a bad elevator servo. Horizon replaced the plane

@Royshanger Год назад

Dude put that plane back together it's not broken that bad.

@RCPlaneReviewer Год назад

Can't bc I have to ship it to horizion for them to inspect it for the claim

@Royshanger Год назад

@@RCPlaneReviewer Oh I see there is something wrong with electronics.

@RCPlaneReviewer Год назад

@@Royshanger yes a bad elevator servo

@Royshanger Год назад

@RCPlaneReviewer It was a weird crash, and you did say it wasn't working after ceash.

@IceMan2035 Год назад

Did you pull out the servos to see if one failed? I'm glad y'all show this crashing it's a part of the hobby.

@RCPlaneReviewer Год назад

I haven't yet, I'm actually doing it now!

@RCPlaneReviewer Год назад

I just put the elevator servo on my servo tester and it is DEAD! all other servos worked properly even after the crash...bummer! Will report to Horizon!

@vrsphone1117 10 месяцев назад

I had a motor stop working on mine and took it home and was working again but it was a very hot day and think speed controler had slipped forward

@teamfutabaspeedfresh8339 Год назад

Dam, brand new plane too sorry about your new twin timber man. That not supposed to happen

@RCPlaneReviewer Год назад

Appreciate it man, hopefully horizion will get me back in the air!

@teamfutabaspeedfresh8339 Год назад

@@RCPlaneReviewer Ali machinchy will take care of that I met him if you see him, tell him I said hello

@jeffhalterman4833 Год назад

I bet your gyro came loose. My friend who is experienced had the same thing happen. He had no control and it nosed dived in.

@sxsmarine4075 Год назад

Same the entire cage on the elevator arm that holds the servo was not even glued

@snoriverrc3842 Год назад

he doesnt use the gyro, except AS3X.

@thewholls7176 Год назад

Brown out on the spektrum radio……..?

@James-gz4oj Год назад

IT POPPPPED UP AND IT POPPPPED DOWN HA HA HA HA

@sendit_rc Год назад

Works great til it doesn't 😢 Wonder if it was the momentum pulled apart the xt60 to ic3 not giving a good connection.the two holds might have been a bad connection.

@RCPlaneReviewer Год назад

No itvwas a bad elevator servo.. I tested it after the crash

@Killerplanes Год назад

Good Lord, I do still hate seeing this happen! Perhaps you’d like to do a video with our TIgerShark? You’d get to go pick it up and launch it again- much more fun! Give us a shout!

@spiroskatsikas 6 месяцев назад

Can repair that easily, people how just buy everything always crash because it took effort, u didn't glue down the components and something unplugged during a monovor

@RCPlaneReviewer 6 месяцев назад

No that wasn't it at all the elevator servo went bad during flight. Horizon sent me a replacement

@broncobart4354 Год назад

Just had my first crash with one of these. I think they’re too heavy and the tail moment is too short. There’s not enough tail leverage to recover if the throttle is pulled back. Hence differential thrust.

@RCPlaneReviewer Год назад

Sorry to hear that bronco, you may be onto somthing!

@davidgerlach1132 Год назад

Freedom Model Spirit

@lelzie Год назад

I should have checked this video. I just took mine out for a maiden today. First flight was fine, second flight, crash. ELEVATOR issue.

@RCPlaneReviewer Год назад

Contact horizion hobby let them know, test your elevator servo, box it up crashed and let them test it and they'll send you a new one

@snoriverrc3842 Год назад

Ouch that just hurts to watch. I have to say, I am seeing a lot of servo failures on the forums. Many right out of the box. I'd like to know how many Horizon is RMA'ing. It scares me to fly mine, and I'm thinking the aileron and elevator servos should be replaced.

@JohnDoe50047 Год назад

Horizon won't help you. They void your warranty the instant you assemble the plane. Unless you can somehow find a defect before even putting the parts together, you are completely out of luck with them.

@RSchwara1 Год назад

In all honesty I've seen the twin timber in person and it didn't really wow me enough to go out and buy one. Recently I lost the elevator servo (plane was less than a year old) on a Commander 1.4 MPD. I was able to get it around and almost made it to the runway, I landed it on the gear down the hill out of sight slow and what I thought was easy but when I got to the plane the fuselage and one of the wings were both busted beyond repair. I did however buy another one to replace it as it's such a good flyer and I really enjoy it. Got lots of parts for it too! ;) Sorry for your loss and that it happened. I've had a cherokee 1.3 and an apprentice lock aileron servos and crash in similar fashion. As you have said unfortunately it's part of the hobby, a sad and slightly expensive part though :( Shake it off, grab another plane and send it!!! :)

@twincitymoo7141 Год назад

That's what I said last night, "I don't know why I didn't pull out!"

@reckemroysrc3764 Год назад

Not even a happy ending 😅😅😅

@stevendeus9229 6 месяцев назад

I know mine will look like that soon

@hornet224 Год назад

You flew for 5 minutes and 16 seconds. Did your battery die? Beautiful field. Watching it saved me $400.

@RCPlaneReviewer Год назад

No the battery was good still had 38% left. What happened was the elevator servo failed. Horizion hobby sent me a new model after asking me to send in the crashed plane for inspection..bad servos are a problem for them apparently

@user-ds9ir4ne1l 10 месяцев назад

Me gusta los vídeos

@RCPlaneReviewer 10 месяцев назад

Thank you I appreciate it!!

@jacksampson7711 Год назад

Love the channel and keeping it real!!! I fly in south florida and never have wind under 10 mph. That sucks. You must have had some kind of failure....

@RCPlaneReviewer Год назад

Appreciate the kind words! was! I tested the servos, and the elevator servo went bad on me...all others still work

@SomeGuyInSandy Год назад

Popcorn!

@wwjoesr Год назад

“Look at the size of that impact crater!” Just gotta love Jeff’s input 😂

@bigeclipse718 Месяц назад

2 holds...thats no good and why i left spektrum

@I_am_archie Год назад

🤠

@jprovis Год назад

Please to hear the Horizon stands their products!

@RCPlaneReviewer Год назад

Me too!!! Very happy

@tboystoys5682 Год назад

That sucks brother but like you said it’s part of the hobby. Well it’s good to see a smile on your face even though we know how disgusted ya are. I’d be the same way oh well onward and upward. 👍👍👍✈️✈️✈️

@RCPlaneReviewer Год назад

Much appreciated 🙏

@53roger Год назад

Sorry you lost your plane. I didn't watch the whole video but heard you say you lost communication with the plane. If that is the case, i would urge you to setup a failsafe on your receiver that will/can/should prevent a straight down nose dive. I noticed a SAFE decal on the wing. In case you may not be aware...you can program you receiver to switch to safe mode in case of loss of signal. It will not stop a crash but it will greatly minimize the damage by getting the plane in a wings level attitude, just sayin'. I program my receivers upon signal loss (fail safe) to do left aileron for an average turn, a little up elevator, and zero throttle.

@RCPlaneReviewer Год назад

It was a faulty bad elevator servo.

@puudogp1850 Год назад

Well guess bobby keeping the single engine. Ever figure out why it lost comm.?

@RCPlaneReviewer Год назад

Yep!! Tested all the servos all good except the elevator servo...went bad and caused the crash 😑

@puudogp1850 Год назад

@@RCPlaneReviewer Thanks for update I would put a thumbs up but seems like the wrong response LOL

@sxsmarine4075 Год назад

Let me guess the fucking servo came on glued or wasn’t glued at all. Had the same thing happened to me. check the wing servos my whole cage wasn’t even glued in. Emailed Horizon hobby got no response.

@RcNeil Год назад

Greg “Fat guy fly rc” had the same issues too am waiting on the 2nd batch

@CumbersomeDinosaur Год назад

Mine also came with a twitchy elevator servo. Horizon is sending me a new servo. This is interesting because I’m reading about a lot of bad elevator servos… strange.

@SunriseRCAviator Год назад

Now that's a crap pile. To bad about the elevator servo. HH servos do fault more than expected.

@prowlus 9 месяцев назад

And yet they charge you f*** *** prices on everything

@lamarw7757 Год назад

Upgrade those servos.

@Br3tt1175 Год назад

I bet Your elevator servo came unglued, on my third battery with my twin timber mine come off while I was taxing out luckily it wasn’t in flight. On horizons webpage some else also left a review saying that when he did preflight check he noticed that the elevator servo was very loosely attached. I have also had both of my flap servo come unglued as well. Definitely seems to be a problem with the glue in this plane.

@tonydarst8211 Год назад

I lost the elevator servo on my Arrows Edge 540 on about its 5th flight. I managed to land it using throttle - it was stuck almost neutral - slightly up. I replace ALL of the servos with better ones before I flew it again.

@did3d523 19 дней назад

possible to reglue

@RCPlaneReviewer 18 дней назад

Total loss They replaced it after they realized the servor went bad

@johnblythe6453 Год назад

Servo failure so bad your flying was great do not let it affect your confidence ,get back in the air as soon as possible greetings from Wales .

@RCPlaneReviewer Год назад

Appreciate the kind words and support!

@pstarxxx78 Год назад

Will HH hook up a new plane seeing no doubt it was a servo failure?

@RCPlaneReviewer Год назад

I sure hope so considering

@jimvalim1567 Год назад

It looks like one of the ESC's stopped working, from the way it was cork screwing back to the ground! If you find out what the problem was, let us know.

@snoriverrc3842 Год назад

I think he was attempting a flat spin

@RcNeil Год назад

Servo died, I wasn’t surprised I heard a lot of complaints abt servos on this timber going crazy straight out the box, am waiting on the 2nd batch

@jimvalim1567 Год назад

Found another RU-vid video of someone doing a maiden on this plane. He had a problem with the ESC's being out of calibration. One motor would pull more than the other one. He also had a bad servo that would flutter on one of the ailerons.

@snoriverrc3842 Год назад

@@jimvalim1567 I believe it says in the manual to set the throttle trim up until the motors turn on. That will tell you if Differential is set properly. You can then trim the rudder until they match, and then physically adjust the rudder. Differential is awesome, especially on water.

@dronecatalyst Год назад

At first glance it seemed like you lost power and elevator. I know you found the bad servo, but how the battery?

@RCPlaneReviewer Год назад

The battery was fine no problems

@trondaustad8617 Год назад

That sucks man sorry for your smash. Hope horizon is positve and give u a new one. Nice video. And yes its part of the game😊

@old-rcplane-phart Год назад

Listen at 7:12

@trondaustad8617 Год назад

@@old-rcplane-phart full speed ???

@old-rcplane-phart Год назад

@@trondaustad8617 Sounds like reverse to me. As I have reverse thrust setup on my Twimber. Same exact sound.

@old-rcplane-phart Год назад

May have been a setup error, who knows. Fat guy's esc wasn't calibrated. STILL, everytime I plug in a battery, I do a system check, CS check, check everything everytime.

@trondaustad8617 Год назад

@@old-rcplane-phart yes me to. But u know sometimes we f... up and crash. Part of the hobby.

@berrymucuckiner4890 Год назад

I’ve gotz $5 on it! the gear setup, wheels and all, that is. Hit me up!??????

@RCPlaneReviewer Год назад

Lol

@teamfutabaspeedfresh8339 Год назад

Go get another man and tell him hey. That one is defective. It happens to us all man. Keep your head up you gonna be alright I’ve crash my plane before a lot of times. It happens. I’ve been there.

@truenaturestormers2525 Год назад

I have seen other of these Twin Turbo, have some problems, much like yours. Fatguy flies i believe. Was one of them.

@RCPlaneReviewer Год назад

It's possible

@whiskeyhotelpapa Год назад

Another option if you like the radio is to buy a ufl to sma lead and a Video Aerial Systems Diamond 2.4ghz antenna and replace the antenna with it. The way you bend your antenna, your flying right in the blind spot for the rf coming from the transmitter

@RCPlaneReviewer Год назад

What does this have to do with the bad elevator servo that was tested and caused this crash lol 😆

@whiskeyhotelpapa Год назад

If you send the receiver back for service they'll replace the Insulators that are now broke which was caused by the same thing that killed the servo....the crash, lol. Another idea, could be the bec not being enough output.... again causing brown out, 55 fades and 2 Holds or IOW Failsafe. You did have a lot of controls activated and throttle all while in a dive (higher amps ) all simultaneously when the 2 holds occurred. Two separate hold which is why it changed direction briefly before Failsafe-ing again.

@whiskeyhotelpapa Год назад

Multiple things going on that one could lean on like all that telemetry your running and jamming up the pipeline of communication, but all comes back to poor RF performance mostly caused by the transmitter. There was a time when mfgs would brag about latency right on the box. It's pretty embarrassing now with 2.4 though. A radio master t16s with a crossfire system is a really good option too. I have both. Honestly thinking about converting everything I have to crossfire.

@whiskeyhotelpapa Год назад

IF the servo burned out it was likely due to how stiff the elevator usually is when the planes arrive new. I'm just trying to give you a fighting chance to find the smaller problems by having good Link. I pop the controls free and check freedom of movement before maiden ..... usually, lol. I have noticed Timbers usually arrive with very stiff elevators caused by the foam in the hinge area. I spend a few mins flexing and repeatedly wiggling the elevator until it breaks in the hinge area and becomes noticeably free-er movement. ....but if you had good link ..... 😜

@RCPlaneReviewer Год назад

@@whiskeyhotelpapa 💯 % agree 👍 thanks for your insight!!

@pilotmiami1 Год назад

Unfortunately

@abundantharmony Год назад

A "geofence"? No thanks.

@RCPlaneReviewer Год назад

It's a joke. No such thing.

@abundantharmony Год назад

@@RCPlaneReviewer Maaaan, I was about to say.. as soon as telemetry comes with geofences, I'm out.

@RCPlaneReviewer Год назад

@@abundantharmony lol I know what you mean!

@dutchloveRC Год назад

OH MAAAAAN : (

@darindooley4509 Год назад

Geo fence!? No kidding! I have 40 plus aircraft, that are not limited by Geo fence crap.

@RCPlaneReviewer Год назад

That was a joke guy lol

@jimvalim1567 Год назад

Well, that was a quick $400 bucks!

@jimvalim1567 Год назад

At least you can salvage some of the parts! Sorry for your loss 😔.

@danflom1271 Год назад

sorry for your loss

@kostya8653 11 месяцев назад

Wery pretty

@russgalpin7943 Год назад

Think something is up with Horizon, I lost my Ultra Stik 30 on maiden, went straight from around 100 ft, pulled back on the stick and nothing just like on your video . Got crickets from Horizon, bought the Ultra Stik 60 ( the yellow electric) on maiden with it i needed full aileron trim to fly trimmed and when I landed the rudder is straight with the vertical stab and ailerons at full left trim, like as if a heavy wing. Bad flying planes become hanger queens. I think I’m done with Horizon Hobby

@JLNYardBird Год назад

Unboxings make me lollipop on my handgun.

@ltfadl1 Год назад

"Part of the hobby" those words I don't want to hear anymore LOL. I was flying in 12 plus mph winds today and nosed over my timber evolution on take off, twice, needless to say, it's down for a while. Sorry about your bird, the sucky part of the hobby. 😂

@thedigitalshack Год назад

Looks like you lost your fligt skills. A channel for 1st and lasts for sure

@RcNeil Год назад

What a dumb comment 🤦🏼‍♂️ I know there would be at least one and that’s you no clue whatsoever abt rc planes 😂.

@RCPlaneReviewer Год назад

Thanks for watching

@LoveRC Год назад

The Twin Timber hasn't appealed to me. Sorry to see yours go down though. I'd much rather fly my Turbo Timber Evo. She very agile and doesn't mind the wind.

@RCPlaneReviewer Год назад

Thanks for watching!

@MrJohn1966elliott Год назад

I think it’s stall. Heavy Battery move back !

@RCPlaneReviewer Год назад

No..it was a bad elevator servo it's in the comments

@Jeffnc84 Год назад

Not a stall

@waynemiller6070 Год назад

The first video of yours I've seen. But I could tell right away that you are a fine pilot. I'm pretty sure we all agree this is equipment failure. I have this plane and the connectors are pretty tight, so I don't know what came undone, but I would think something did. Pretty hard to laugh it of. It's not an inexpensive plane.

@RCPlaneReviewer Год назад

Appreciate the kind words! Yeah, I just tested the elevator servo and it's a Bad elevator servo..ugh! at least now I know why

@SlowFlyer85 Год назад

we know its not your flying had to be electronics failure

@Mikeylikesit1968 Год назад

Probably using a Spekjunk transmitter.

@whiskeyhotelpapa Год назад

Well welcome to Team Failsafe. The problem is laying in your hand. .....Sorry for your loss. Recommend buying a JR radio and aura gyro (if you want gyros) next time.

@RCPlaneReviewer Год назад

So that would be all well in goof if the elevator servo didn't fail in mid flight. Failsafe wouldn't not have helped or done anything.

@Jeffnc84 Год назад

😂😂😂😂😂😂😂😂 people are always quick to blame the radio. You fly what you like. I’ll fly what I like.

@whiskeyhotelpapa Год назад

55 fades /2 Holds.....

@stava1986 Год назад

WARNING! watch my MAIDEN of the E-Flite Twin Timber BEFORE you buy!/ fat guy flies/ 3 weeks ago check it out mate. Shame on HH for putting this out too fast.

@PilotDEE38 Год назад

Welcome to horizon hobby , our servos might fail you when you need them most $379 down the drain !!! Care to buy another horizon product ???? Lucky I ground checked my night timber x before launch . My tail and aileron servo failed same time on the ground happy I found out before take off !!!!

@stava1986 Год назад

I was keen on this plane but not now or ever.

@RCPlaneReviewer Год назад

Yeahhhh kinda takes the fun out of the experience