🚀 Betafpv Pavo 20 3S Cinewehoop - Great Newbie Drone✅ review

Подписаться 6 тыс.

Просмотров 3,3 тыс.

50% 1

🚀 Betafpv Pavo 20 3S Cinewehoop - Great Newbie Drone.
Buy your own here 👇👇👇
bit.ly/3V6oudU
Not sure what to buy? Leave a comment and I can help.
First job, swap those props for some HQ Ones here.
www.hqprop.com/hq-ultralight-...
We have 3 twat flights, a sort of u boxing and then of course an HONEST answer to the question, should YOU Buy it?
Be sure to leave a comment to help us grow and give this video a share please.
Connect with us:👇
team@squadquads.co.uk
Instagram:👇
squaddingqu...
Tiktok :👇
www.tiktok.com/@squadding_qua...
Twitter:👇
x.com/squaddingquads?t=Z-dEuC...
💥Help me reach 5000 subscribers!✅
☑️ 100
☑️ 500
☑️ 1000
☑️ 1500
☑️ 2000
☑️ 3000
🔲 4000
🔲 5000
.
Www.Linktree.com/squaddingquads
Www.Linktree.com/squaddingquads
#BetaFPV
#Pavo20
#TinyWhoop
#FPVracing
#DroneLife
#MicroQuad
#FPVaddict
#Quadcopter
#TinyWhoopLife
#3Squad
#DroneCommunity
#TinyWhoopNation
#FPVfreestyle
#MicroFPV
#Betaflight
Timestamps:
0:00 - intro Pavo 20 - 3s Tinywhoop
0:25 - Build Details
5:30 - Maiden Test Flight (Narrated)
7:10 - Park Flight(Narrated)
11:07 - Nature reserve test (Narrated)
14:00 - SHOULD YOU Buy It?
16:23 - Thank you for all your support.
19:53 - The End

Развлечения

Опубликовано:

9 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 58

@squaddingquads 2 месяца назад

**update ** Betafpv have contacted me after this review and said they'll look into the props with regards to my comments of providing tri or qud blades. And have also said they will be replacing my LED strip. A company lives or does by its customer service and this response from Betafpv is 10 out of 10, I'm genuinely super impressed and it's clear they watched the entire review and are willing to improve the product, for that reason alone, go and buy one, right now 🎉

@jimmytheflyguy7313 2 месяца назад

That's customer service right there

@LehtusBphree2flyFPV 2 месяца назад

Quad blade would be really nice and to offer both tri and quad in the same package

@squaddingquads 2 месяца назад

@@LehtusBphree2flyFPV I agree, I know they want to offer bi blades to keep the weight down for marketing reasons and that's totally cool, but make the second set tri blades, I really try to see things from the newbies point of view when doing these reviews, hopefully betafpv will take this feedback on board

@squaddingquads 2 месяца назад

@@jimmytheflyguy7313 ain't that the truth

@boywonderfpv6158 2 месяца назад

I LOVE the opening, soo cool. 🎉

@squaddingquads 2 месяца назад

Thanks Boywonder I'm proud of It

@jimmytheflyguy7313 2 месяца назад

100 bucks????? For something this good? I'm sold!

@squaddingquads 2 месяца назад

Such a bargain

@GERALD-qr3oy 2 месяца назад

Nice Review and flying. Thanks for sharing this video.

@squaddingquads 2 месяца назад

My pleasure, thanks for taking the time to watch, I hope you enjoyed 🫶

@fpvgivy Месяц назад

Theres an amazing mod that can easily be 3D printed. It pushes the camera forward enough that the props gaurds are NEVER in the view even at 0 angle!!! and still the prop guards slightly still protects it.

@squaddingquads Месяц назад

Oh.... That's a game changer, have you got a link to the stl, pretty please.

@gymmotivationforyou123 2 месяца назад

This looks absolutely amazing

@squaddingquads 2 месяца назад

It really, genuinely is, thanks for the support

@Nordic_Drone_Explorer 2 месяца назад

Nice Review and flying. 😊 I have a Pavo20 and I got the Runcamlink Night Eagle HD cam to get proper Night vision here in the dark Winter months.

@squaddingquads 2 месяца назад

Thanks brother, I appreciate that. Oh that sounds good, have you got a video up?

@Nordic_Drone_Explorer 2 месяца назад

@@squaddingquads yes I did a couple both putting it together and flying 🙂 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-7CEzk70zgGk.htmlsi=TMFGzBrbg7Wn6EWu

@JediFPV 2 месяца назад

Wow Super review mate you went through everything give it a couple of weeks and I'm definitely getting one 💪 I'll be needing them green LEDs 😍

@squaddingquads 2 месяца назад

That's really great to hear mate, glad you enjoyed it. Re the LED they come with the blue, just add the green to your cart and you'll have the green and a spare blue set, winner. Tree he price of them is great too.

@LehtusBphree2flyFPV 2 месяца назад

6 blade on 3s and 4s with a throttle limit change when changing to 4s flys wonderful

@squaddingquads 2 месяца назад

What are you using my man?

@LehtusBphree2flyFPV 2 месяца назад

Hq 5 blade cinewhoop blades with 450mah 4s @@squaddingquads

@squaddingquads 2 месяца назад

@@LehtusBphree2flyFPV are they the 2" ones? I assume your flying the pavo? And so2rhey sound like a turbine :) Thanks man

@LehtusBphree2flyFPV 2 месяца назад

@@squaddingquads yes they do

@squaddingquads 2 месяца назад

@@LehtusBphree2flyFPV thanks man I really appreciate it

@BMFPV 2 месяца назад

Fantastic review! If I didn't already have one I would buy one after this 🤣 Absolutely spot on about the bi-blade props, I flew in gusty winds with the bi-blades and a couple of times I had zero control 😱. Tri-blades are the way to go, I think manufacturers put bi-blades on new models to bring the weight down when they advertise it.

@squaddingquads 2 месяца назад

Thanks do much mate, that means a lot. Yeah I think your right about the weight. It's a shame as it really doesn't help the newbies it's aimed at and like you say you've had issues with them yourself too. I'm only a small channel but it'd be nice nice if they listened :)

@squaddingquads 2 месяца назад

Do you have a ducted micro? Are you planning to pick one of these Betafpv Pavo 20 Drones up?

@Spacecazeka 2 месяца назад

I want to put the origional 03 unit antenna on my pavo 20, instead of using the 2 small ones, but i don't know where i should put the wires as they are pretty long. .... do you think the range / signal is much better with the origional vx antenna?

@squaddingquads 2 месяца назад

I use the OG without issue, it goes via the frame, I can't comment on range not using it though sadly

@ne1canhack909 Месяц назад

How would you take out the ducts out of video, can you take a professional video from this setup without any jello?

@squaddingquads Месяц назад

Just raise the angle slightly on the camera and the ducts are out of view. As for professional videos, check out this, that was filmed on the Pavo 20 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fJp4FbqRCLM.htmlsi=3Ft7e7AYvrizh8w7

@adakalyoncu1913 2 месяца назад

Does an O3 vtx come with it in the package or do you provide the O3 yourself and it only has the mount and screws and stuff? Can i get this drone flying with my elrs radio and getting just goggles without buying something that I pay for the dji dildo motion controller that comes with avata basically?

@squaddingquads 2 месяца назад

No, you provident our own 03. This Drone is 100 bucks, the 03 is 250 bucks,so they'd be including something and making a massive loss at 100 bucks. The dji motion Controller is just for the avatar. Yes there is an ELRS version and that would work with your ELRS tx. The ELRS version is 100 bucks, the crossfire is 140 bucks. 💪

@adakalyoncu1913 2 месяца назад

Thank you man, btw I also wanna ask, have you figured a way to buy dji O3 goggles without also paying for and getting a motion controller with it? I wanna go digital on my next quad but the fact that goggles themselves are like 5 times more expensive than any quad that I wanna buy and some good portion of it probably is the d*ldo they send with the goggles; makes it quite hard

@squaddingquads 2 месяца назад

@@adakalyoncu1913 yeah you can buy them without the motion controller

@adakalyoncu1913 2 месяца назад

Hey man btw it is a bit of an irrevelant question but, how many degrees per second does the rates you set from the goggles menu correspond? It shows in this decimal number unit

@adakalyoncu1913 2 месяца назад

Hey man, I have a question, how much throttle does this thing hover at?

@squaddingquads 2 месяца назад

On 3s about 20% and 2s about 28%💪

@adakalyoncu1913 2 месяца назад

My tinyhawk hovers at like 20 percent in a full just plugged pack and it creeps up to 25 ish something when I'm nearing 3,5 volts per cell. (Ig you could take it like 23 avreage) Also man Idk if it's just me or if it is like that but I kinda feel like it was slightly punchier and took like idk, 1 percent less throttle in the past, The packs are quite old and swelly too so do you think it is just because of that or is there anything I should worry about?

@adakalyoncu1913 2 месяца назад

Also man does it use any throttle expo by any chance?

@squaddingquads 2 месяца назад

@@adakalyoncu1913 as the packs get older they produce less power over time, that's totally normally and you'll notice it more on a micro quad,irs your pack not quad. You raise an interesting point about rhotttle hover limits, something I think I'll make a comparison video of when I'm able to

@squaddingquads 2 месяца назад

@@adakalyoncu1913 nope I don't add Expo unless flying inside

@grahamscarr6862 2 месяца назад

Would you take this over the mobula 8 and the flylens 85?

@squaddingquads 2 месяца назад

Right now, I'd take the betafpv Pavo 20. But the Mobula 8 I've not flown as much yet, the flywoo is, sadly, a distant 3rd

@grahamscarr6862 2 месяца назад

@@squaddingquads thanks mate looking to come back to the hobby but can't decide

@squaddingquads 2 месяца назад

@@grahamscarr6862 this is a PERFECT starter quad. It flys like a freestyle, I've got a video scheduled for later where I dive though 100ft tall trees with this. What other Quads are you considering, maybe I can help you out

@grahamscarr6862 2 месяца назад

@squaddingquads I'll be honest mate I used to fly analog 5 inch quads years ago and was looking at this style quad but also the 3 inch quads ( baby hawk 03 etc

@squaddingquads 2 месяца назад

@@grahamscarr6862 may I suggest checking out jy review ofnrhe new drone stingerbee, it's only 3" but flys like a 5",pedfecr to find your feet again with