100$ TinyWhoop THAT RIPS! Mobula7 Killer?

Подписаться 508

Просмотров 12 тыс.

50% 1

Subscribe for more custom builds! ;)
Thanks for @qwadimodo1998 for being a cameraman :) BUILD TUTORIAL: • Fast 2S Tinywhoop Quic...
PARTS LIST:
Frame (Beta 75 Pro 2)-----------------------------
betafpv.com/products/beta75-p...
Motors (0802 14 000 kv Betafpv)----------------
betafpv.com/products/0802-bru...
AIO (Betafpv 2022 12A Aio)---------------------------
betafpv.com/products/f4-1s-12...
Propellers (Gemfan Biblade 40mm)-----------------
betafpv.com/products/gemfan-4...
FPV CAM (Runcam Nano3)-------------------------
pl.aliexpress.com/item/400061...
VTX (Happymodel OVX300)------------------------------
pl.aliexpress.com/item/100500...
Gear------------------------------
Transmitter: Radiomaster TX16S with BetaFPV Black 1W ELRS module set.250mw 250hz
Standard antenna close range, Happymodel Moxon for longer range flights(directional)
Fpv goggles: Skyzone 02X with foxeer lollipop 3 omni and realacc triple feed patch directional
1#Quad(5inch) with RTH For risky flights)------------------------------
Frame: Iflight XL5
Motors: Iflight XING 2207 1800KV Unibell
FC: IFlight SucceX-E F4 F405
ESC: SucceX-E 45A
VTX: RUSH TANK II V2 with foxeer lollipop 3 omni
FPV Cam: Caddx Ratel 1/1.8
GPS:Beitian BN220
2#Quad(5inch) Bando Basher------------------------------
Frame: APEX RTS
Motors: Iflight XING 2207 1800KV Unibell
FC: SpedyBee f405
ESC: SpedyBee BLS 50A
VTX: JHEMCU 600mw
FPV Cam: Caddx Ratel 1/1.8
3#Quad(2.5Inch)--------------
Cinelog25 bnf plus hero8 naked
4#Whoop 65mm
Frame: Meteor65
AIO: Diamond AIO
Motors: SE0702 Happymodel motors 28k kv
FPV Cam: Betafpv C02
5#Whoop 75mm
Frame: Beta75 Pro2
AIO: Betafpv AIO 12A 2022
VTX: Happymodel OVX300
Motors: 0802 Betafpv 14k kv
FPV Cam: Runcam Nano3
Lipos I use for 5inch-----------------------
Ovonic 120C 6s 1300mah
Beat 95c 6s 1500mah
Lipos I use for whoops-----------------------
Tattu 300mah BT2.0
Drone HD Camera-----------------------
GoPro Hero 7 Black
Stickcam--------------------------------------
Gopro Hero 9 Black

Авто/Мото

Опубликовано:

10 авг 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 58

@doodgeslagenmug 6 месяцев назад

Wow you’re such an amazing pilot. I can’t manage to fly like that indoors on my 2s tinywhoop.

@jonowillmer 5 месяцев назад

Very nice, thanks for the build info, this looks like a great way to use all my bad 1s packs, good tip, thank you.

@grox3857 4 месяца назад

Exactly, on my regular mobula6 voltage dropped to 3,4V from 4,35V instantly on these lipos. Lipo sag was huge and it was hard to fly. But with this build they have much easier life and less sag, more performance ;) Even more benefits if you have big amounts of weak 1S sticks :)

@jonowillmer 4 месяца назад

@@grox3857 very good to hear thanks

@DelphicSpider 2 месяца назад

Congratulations, you just built the original mob7 from 6 years ago👍

@grox3857 2 месяца назад

Old Mob7 Had F3FC With more grams and less efficient, also harder to PID Tune correctly. Motors fall apart very easy. I had very simillar whoop, then built this beast :)

@fpvdronecraft 3 месяца назад

Great video, congrats!

@grox3857 3 месяца назад

Thaanks :)

@CostaFPV 9 месяцев назад

Nice gig 😊

@alenbrk1368 Месяц назад

Wow nice man! Do you need to tune it? Or is the Flight controller already tuned ?

@grox3857 Месяц назад

Runs pretty good on stock PID"S

@alenbrk1368 Месяц назад

@@grox3857 so this means, when buying fc there are already stock pids preconfigured?

@grox3857 Месяц назад

@@alenbrk1368 Yes, you will only need small tweaks, Connect to the ESC Firmware thru ESConlineconfigurator and set it to 2S Mode preset

@SuprDlux Месяц назад

Sick, I’m building something similar rn ❤

@grox3857 Месяц назад

I Wish you success, and fullsend! :)

@swimbeyonder Месяц назад

I have to ask you something man. I fried my esc board on my tinyhawk (the tinywhoop one) and the replacements are 80 euros, too much. Could I use another board like your one here into my tinywhoop? the tinyhawk use a all in one board, does it means that vtx and main board are not separable?

@qwadimodo1998 9 месяцев назад

🔥🔥🔥

@redair_fpv 2 месяца назад

great skill

@grox3857 2 месяца назад

Thanks man, just don't stop flying and skill with less crashing will come to anybody, matter of pratcice :)

@daich 8 месяцев назад

nice. could you run 45mm props on that frame too right?

@grox3857 23 дня назад

40mm props, 45mm on meteor 75 pro frame yes

@grox3857 4 месяца назад

What do you think guys, how it compares to the Mobula7 for example, would you choose this custom build or Mob7 instead?

@butterflyfpv 4 месяца назад

Very nice powerful build! I wish the beta motors had two ball bearings..

@grox3857 4 месяца назад

@@butterflyfpv But you can get these older updated Beta 0802 motors at very low price from official site. And durability is very very good, still no need to replace them and whoop is operational ater a lot of packs and crashes it has been trough :)

@butterflyfpv 4 месяца назад

@@grox3857 Ok thank you! I also found 14000kv from neebeedrone..

@titustech4453 12 дней назад

Hey can someone plz help me, will a flysky fs-i6x work with this? or would i need a different flight controller

@MariuszFPV 9 месяцев назад

💪💫

@swimbeyonder Месяц назад

How do I know if one component is compatible with another? like if one cam is compatible with another??? do vtx and aio have to be of the same brand?

@grox3857 23 дня назад

They don't need to be the same brand, you can install something different, tx port don't even need to be used, then you will set power and channel on the vtx via button but not betaflight

@alperenozgur 3 месяца назад

do you fly angle indoors in that fast flying? and rates for that flight?

@grox3857 3 месяца назад

I have Mr.Steele rates and all acro mode :) I only fly angle in LOS

@alperenozgur 3 месяца назад

@@grox3857 ok thanks but which steele rates :D there are many in the web.

@grox3857 3 месяца назад

@@alperenozgurI have RC Rate 2.00 Super rate 0.65 expo zero (And there are Betaflight) it gives max motion above 1000deg/s on full reach

@brechtxbrecht 2 месяца назад

Very nice video! This gave me some very nice inspiration, is there any chance I could pm u about some extra information?

@grox3857 2 месяца назад

Thanks! No problem you can ask questions here, so other pepole with similar will also have answer

@brechtxbrecht 2 месяца назад

Since a lot of the parts are not available anymore now, what other kind of combination would be good for 2S setup, im not really sure what parts would fit together and be durable.

@grox3857 2 месяца назад

@@brechtxbrecht 2S AIO(from the video), MIcro lightweight VTX (ovx300) Currently motors are not available, so you can pick these new ice blue 0802 from betafpv kv range from 13kkv->15kkv

@brechtxbrecht 2 месяца назад

Thanks!

@kaskalo2 5 месяцев назад

Can it run normal 2s? Or it has to be 2x1s?

@grox3857 5 месяцев назад

Yes, if you switch to xt30 but this connector is much heavier than 2xbt2.0

@ontariodoublex2713 Месяц назад

I wonder how it would do on something like a 550mah

@grox3857 Месяц назад

Maybe 9mins but it will feel more heavy and not fly as good. I think these 380mah gnb's are close to max weight that fly very well, maybe 400mah for two of these lipos to have 2s max. In bigger lipo you will gain more flighttime but whoop will fly worse and crash harder. It's always a trade one way or another.

@kratzeni 3 месяца назад

Motors are discontinued now. What alternative do you reccomend?

@grox3857 3 месяца назад

Yes, they are discontinued, very unfortunately because old version is more durable than this new shiny edition. But you can still buy them from official BETAFPV store for less money, so hurry up ;)

@kratzeni 3 месяца назад

@@grox3857 No the lower KV variants like you used are already out of strock. There is just 22000KV and 19500KV

@grox3857 3 месяца назад

@@kratzeni Not good, so we need to use new 0802. Pick similar kv from 10k-16k max for 2s Voltage and also with ball bearings, this is important for high rpm performance. They are more expensive, but no other options on the market right now unfortunately

@anonymous_real 3 месяца назад

What about happymodel se0802 16000kv?

@grox3857 3 месяца назад

I had them, broke 8pcs in one week so not very durable.

@ontariodoublex2713 Месяц назад

Thing seems super good, but they don’t make those motors anymore

@grox3857 Месяц назад

You can get newer BETAFPV Chrome 0802 instead

@gamingisnotacrime 2 месяца назад

where i can find the stand for whoop in 0:09 second?

@grox3857 2 месяца назад

Hi, this is my quick project and 3D Printed launchpad

@gamingisnotacrime 2 месяца назад

can you please share with launchpad files?

@Timpox Месяц назад

how far can it go

@grox3857 23 дня назад

Range is pretty baterry limited but 2-5km for the rf links used, and more if you swap better antenas for example foxeer lollipop micro for VTX and Immortal T For the ELRS