'01 POWERstroke - No START [IPR]

Подписаться 168 тыс.

Просмотров 321 тыс.

50% 1

Hey guys thanks for watchin!!! Well as the title says, that test IPR valve fired the engine right up. Need to replace the water drain valve on this truck too along with some much needed maint now. Like and subscribe!!!
Check out my Instagram
@PTT_W_AROD
To send a small donation to help my channel grow & to also to contact me, please visit my Paypal at my email powerstroketechtalkwarod@gmail.com
I am the creator and owner of this material. It does not belong to; nor is affiliated with ANYONE, except for me, the owner and creator. Downloading is strictly forbidden. Contact me if you want my material, its that simple! The events, the characters & even the firms depicted in my photoplay are fictitious. Any similarity to actual events, persons living or dead or to that of actual entities are purely coincidental.

Авто/Мото

Опубликовано:

16 янв 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 451

@darrylt1031 4 года назад

well...THAT video was disappointing....you should have recorded replacing the IPR, and then the final fire up...there's something very satisfying about watching a video where the end result is the truck running well again....

@C4soulja 4 года назад

Nice! Glad it fixed it! Heres a good tip I've learned in my day that can be helpful. If you get a spare similar connector. Lengthien the wires to where you can touch them on the battery terminals. Ground the ground and tap the positive to horribly simulate pwm. If you have a good electrical circuit you'll see sparks. If it's dead nothing will happen and you'll have a quick ipr diag!

@markconley996 5 лет назад

GR8 that u were videoing that check... customer can't deny it now...

@CombinedGamingWorldCGW 7 лет назад

One of my new favorite channels to watch. I'm wrapping up my 450-500hp 7.3 build, as a matter of fact I'm finishing building my transmission in the morning. One of my new favorite daily RU-vidrs, I'm always a fan of the Ford diesel techs that put up videos. Good work! And to answer your question, I like the 7.3 dips tickets over the 6.0 also.

@PowerStrokeTechTalkwARod 7 лет назад

Combined Gaming World thank u thank u. share my vid!! glad u like

@Dmp241 7 лет назад

Hey brother I watch all your vids. I'm a mechanic don't do diesels but watching your vids you have givin me great advice or plan of attacks when doing jobs that look a lot harder then they are. Long story short love the videos your a very smart technician and love watching and learning when I get out of work, keep them coming brother!

@PowerStrokeTechTalkwARod 7 лет назад

+Dave P DUDE thanks so much!!!!!!!!!!!!!!!!!!!!!!!!

@evdawg7757 Год назад

I also am a tech with tons of experience on many gas vehicles. I bought a 2003 7.3 leery on being an old diesel and it was intimidated but they're such a simple first diesel. After learning how these platforms work i wish id have learned sooner.

@tavo24vv19 6 лет назад

Hell yea bro another classic video 😎.

@camneilsen8234 7 лет назад

Wow built in self preservation feature 👍

@markgraham6753 14 дней назад

Don’t know, had my 7.3 coming up on 18 years. She’s had her problems of just normal aging and wear and tear. 168,000 miles on her. She got new headlights and signal lens today. Sporting all sex now. Got lots of new parts coming in just to toughen her up. She’s done her months of setting, we are know that’s not good for them. She’s getting taken care of and on the road again soon. Y’all be safe out there.

@auaiao9 7 лет назад

I'm impressed with your knowledge and hands-on know how of your work. You're an interesting man.

@PowerStrokeTechTalkwARod 7 лет назад

+auaiao9 impressively interesting

@AustenARW 7 лет назад

Crazy stuff you see! Unbelievable. I enjoy these vids a lot and they are very informative. Cool to see the life of a diesel tech. Please keep them coming.

@PowerStrokeTechTalkwARod 7 лет назад

+Austen thanks man so much, stay tuned

@erikgraeff4229 3 года назад

thanks man, very helpful. Im having the same problem

@tiredofthetyranny9874 Год назад

I wish mine was that easy! Changed everything still no start!

@psegler 5 лет назад

I bought my 7.3l with 30k miles on it back in 2002, and it seemed to start showing a loss of power by the time I got it home, 250 miles away. It was 8 quarts low. Put oil in it, and it soon lost all the oil again. Turned out to be faulty injectors. Luckily, I took it to Ford and they covered all new injectors under the factory warranty. It's never left me stranded or had any real problems until now. Right now, I'm pretty sure I have a bad IPR, and my ICP is leaking a tiny bit of oil, but I'm not losing anything close to what a couple of bad injectors can cause. My IPR is showing about 175psi, and this is the second time the truck has just died and won't restart while driving slow or coming to a stop. Similar to a CPS, but that was recently replaced, and my tach still registers rpms. Thanks for the video.

@MrHeadshot1982 7 лет назад

I Got the same truck 4+4 and love the 7.3 old motor but reliable as hell.I got all over half million km still going strong.keep up the good work.

@PowerStrokeTechTalkwARod 7 лет назад

+bud morse thanks!!!!!

@backwoodsgarage8094 3 года назад

Iv got to say the ol 7🌲 most reliable easy to work on love em so much got 3 of them 95 f350 dulley 2wd 5 speed 97 4x4 auto and 99 f350 supercab 4x4 any time of year all 3 will fire up run great

@MrSmoush 7 лет назад

that thing has a skip in it too. you are the mechanic but I think maybe do a compression test to make sure the starting fluid didn't kill a piston

@turbov6bryan2 5 лет назад

my 2000 psd just decided it wont start today. It cranks over great, tach is at 200 or so while cranking over. Guess i will check fuses, and wiring for mice. It was running yesterday, but i parked on the street nose down last night. Today it wont fire up. Never had any issue with it until today. Thanks for the video, its videos like this that that give us a fighting chance, i never knew about the ipr. Guess i will check for fuel bowl fuse too. Thank you for taking the time to make these videos.

@PowerStrokeTechTalkwARod 5 лет назад

No problem, my pleasure to create. Reach out to me if you need trouble shooting advice..

@user-ri9hb6th1w 6 месяцев назад

That why these powerstrokes use 15 QTS of earl in them because its a high pressure oil system to operate the injectors ! Great video man....

@PowerStrokeTechTalkwARod 6 месяцев назад

Yes sir!

@3374jj 4 года назад

Love the 7.3 stick...

@ericmiranda9725 5 лет назад

it holds 15 quarts... glad you're a PRO...

@ericmiranda9725 5 лет назад

AND, YOU USED THE WRONG VISCOSITY OIL..

@robm9041 Год назад

Gotta love the BIG 15QT written in yellow in front of the radiator 😂

@toddb930 5 лет назад

I enjoyed listening to you talk to yourself, ( or "us" ), as you were investigating the problem. Had me laughing at your "owner" questions. Oh, as for dip stick , I'm only familiar with the 7.3. I will tell you that it came in handy one day as a 30 caliper cleaning rod. ;-) My 2000 F250 pickup wouldn't start this morning so I'll be checking some fuses and oil level. I'm thinking I checked it a couple weeks ago. Thanks for the info!

@zourdiesel8579 3 года назад

Great video bro 👌🏾

@kennethholbrook4938 5 лет назад

Very informative thank u

@ronpayne4281 5 лет назад

Nice work i enjoyed the video

@PowerStrokeTechTalkwARod 5 лет назад

Thanks so much!!

@edwardkveton6196 5 лет назад

First thing you always check is oil level. If no visual of an oil leak . Then most of the time injector o rings failure. When a 7.3 falls below 7 quarts it will shut down. Not enough to run HPO system. And if they crank on the engine for a long period of time, you de pleat the HPO in the lines and heads. It will then have reprise itself a crank time of about 60 seconds to build pressure back. You can loosen one of the oil rail plugs on the head to help purge alittle faster. He did not crank long enough to rebuild pressure in the system. The engine needs new injector o rings!!!

@keithnoneya 5 лет назад

So if you have a friend who has a diesel and they bring it to you with a no start, check the oil! Ah that's funny! Rule if thumb on all my friends vehicles when they bring them to me, is check the fluids, battery & terminals. Then ask them have you had any maintenance done on it right before you brought it to me by anyone who's not a professional? Most of the time is something simple or just routine maintenance. Thanks for sharing. Best Wishes n Blessings. Keith Noneya PS you've got a really nice channel here. Put some of the videos on specific types in some play lists, it makes it easier to find the type of videos we'd like to watch. Ie. PowerStrokes, 6.O's 7.3's, F-Series Suspension's etc.

@PowerStrokeTechTalkwARod 5 лет назад

Thanks so much for the positive A+ feed back. Much appreciated!!

@jimmyboe25 2 года назад

ran my truck out of fuel for the first time that was an adventure. People helping me kept asking if it had oil. it had oil just no fuel hahaha

@Importssuckass 7 лет назад

7.3 all the way. Proud owner of a late 99.

@slomango7927 6 лет назад

Bigjoe ? Me too 👍

@PowerStrokeTechTalkwARod 6 лет назад

+Grocery Getter yepp he got a horn too!

@RX7GSLSEowner 5 лет назад

Me three! 'Cept mine is a 2000.

@mlane1986 5 лет назад

Me too. I have a 99 f350 with the 7.3 and a 6 speed manual

@RX7GSLSEowner 5 лет назад

@@mlane1986 Absolutely! Wouldn't trade my Zf6 for an auto any day of the week.

@Bimmerguy88 Год назад

Craziest thing I ever had happen working on a Diesel, it was a early 2000's Ford f350 with the 7.3 PowerStrokeTurbo Diesel. (Just like the truck in THIS video) Truck would crank forever and start up rough when completely cold and run for a little while and no matter what you do whether you let it sit and idle or rev it up to try and build oil pressure so that the injectors keep firing it would always die out ESP once it started to warm up it dies out and will not start back up until it sits and gets completely cool again. I worked on this truck for a week straight and took pictures of everything I did and actually figured out the problem while I was going through my pictures! I changed the engine oil pump that feeds the high pressure oil pump that drives the injection system I changed the high pressure oil pump the IPR solenoid and it still would not stay running. What ended up being the problem, was THERE WAS A CRACK in the timing cover on the inside where the low pressure oil pump sits, the crack was on the timing cover, on the output circuit/feed where the oil gets pumped up and goes into to the reservoir that feeds the HPOP! The LPOP was pumping oil and the oil pressure was bleeding off (THROUGH THE CRACK) and going back into the crankcase on the inside, and not making it up to the high pressure oil pump and once the engine started to warm up the crack would expand and get bigger and the oil pressure would bleed off faster than the low pressure oil pump could pump! Changed the lower timing cover and now she starts EVERY TIME and she runs like a champ! I took over 500 pictures and I just happened to notice this tiny crack in one of the pictures that I took. I was so happy when we finally figured it out and got the vehicle back to the customer!

@PowerStrokeTechTalkwARod Год назад

Omg........😱😱😱😱😱

@tiredofthetyranny9874 Год назад

O NO! I bet this is what is going on with my sons! I noticed the truck was starting to bleed off oil pressure after a few days, that then turned into daily until it stalled in the driveway! Now we got about $2500 in it and still won’t start! New Hpop,Lpop,icp,etc.! Changed everything! Oil pressure kicks right up now while cranking but drops right off when he stops! It’s at a shop and they did every test they know and everything comes back good, they are stumped and letting my son even use their tools to try different stuff so the bill doesn’t go higher! So did you have to pull the engine out?

@PowerStrokeTechTalkwARod Год назад

@Bimmerguy88 Год назад

@@tiredofthetyranny9874 no sir absolutely not! You have to take the fan the fan shroud the radiator out so you have all the space on the front of the engine and then you can get right on the harmonic balancer bolt! :) Now that crank pulley/ harmonic balancer bolt is a HUGE P.I.T.A! I think God HIMSELF torqued them @ the factory ;) haha! What I used to finally get it off was; a big breaker bar (The bigger and thicker the better!) It was a 3/4 drive and I just used a deep socket for the harmonic balancer bolt (I don't remember what size it was) and I braced the breaker bar against the frame of the truck and use the engine starter to crank the engine and it will crack it loose! Now be careful when you do this you are doing this at your own risk, but make sure you get the breaker bar and the socket locked onto the bolt and get it on there nice and straight and then turn the engine by hand until the breaker bar is against the frame hey you have to pay attention to which way the engine spins when it's rotating because you want to brace the breaker bar on the opposite side of the frame so that when you hit the key to engage the starter the engine will try and turn but the breaker bar stop it and the starter turning the engine with the breaker bar holding the bolt against the frame it will break that bolt loose like nothing! ;) Now you only need to hit the starter for just enough time for it to break the bolt loose and then immediately stop and take the bolt out by hand after that. Once you have check on the boat out and slid the harmonic balancer out off of the crankshaft make sure you don't lose the woodruff key, then take the upper timing cover off and then the lower timing cover off. Once you have taken the lower timing cover off flip it around and down where the crankshaft sticks through the timing cover you will see the veins where the low pressure oil pump lines up to and one of them is the suction side of the oil pump and the other is the discharge side if you clean it up really well and look at it with a light if it is doing what the truck I had was doing, you should see a little hairline crack inside one of those veins. We had to replace the lower timing cover we thought about having it welded but it was aluminum and I had no idea if it would be strong enough yada yada yada, because customer was desperate for his truck back at this point so we just replaced it put everything back together and that bad boy fired right up!

@brianskinner4328 7 лет назад

By the way very very awesome video

@PowerStrokeTechTalkwARod 7 лет назад

+Brian Skinner thanks skinner!!!!!!!

@brianskinner4328 7 лет назад

Not a problem. Did you find out what was wrong

@billmalec 6 лет назад

Any time my 7.3 slightly shudders at idle it's down 2 quarts. I keep Rotella with me all the time. Has a slight leak. This takes many miles to happen btw and is relatively rare it gets there anyway.

@PowerStrokeTechTalkwARod 6 лет назад

Ahh gotcha

@mikehawk638 4 года назад

Where did you get the new ipr valve or who did you order it from and how much did it cost. Thanks

@bbubacz1 7 лет назад

What a shame...one of the few ways 7.3's die young. Owner neglect.

@freerepublicusa2064 3 года назад

Likely oil dipstick input plug at the oil pan leaking. Or just straight neglect of a psd puckup

@blaircomer2776 5 лет назад

good information,

@PowerStrokeTechTalkwARod 5 лет назад

Thanks bud

@barrymorris295 5 лет назад

If people took care of their cars like they should, there would only be half as many mechanics!!!!

@claycarley9201 3 года назад

Wow, that oil that was in there was pretty dark for just a couple thousand miles... I know it turns dark quick but that looked like molasses (what was there anyway). Really sad to see all that starting fluid.

@ronaldlemons2836 Месяц назад

i have a 01 7.3 207k. bought the truck from a ranch here in texas, since then ive started making changes which include.. new hpop,new fuel bowl,new tank mod, new valve cover gaskets, new upper wiring harness, new ipr and icp exhaust sensor map sensor,new oem rail fuel pump,im seeing on here that when you have a crank no start the next thing to do is test injectors? if orings are bad would fuel mix in the oil ? also i have 70 psi at fuel bowl could there be something elec happening? the fuel relay behind the radio does it run the fuel pump? and if i did the injector test and found orings bad wouldnt it just to be better to replace the injuectors and cups than just repair old injectors?

@notrelevant427 5 лет назад

Put oil in the hpop reservoir

@retrogod7834 6 лет назад

I have the same problem same sound and everything but my oil level hasn't changed at all. Was leaning towards cam sensor but I'm not sure exactly

@254triple2 7 лет назад

Great video! 7 qts of oil. Don't tell them because they probably think they can go another 10k miles.

@PowerStrokeTechTalkwARod 7 лет назад

+Dale Park thanks, no shit right!

@gr8guitarplayer 7 лет назад

My request: Show how to ohm the glow plugs. I just ordered a set, figuring I'll need them soon enough, but I've actually never diagnosed them. Truck was hard to start when really cold (below 20F), but when I shorted across the GPR, it started much easier, so I replaced it. But it still romps once started, if it's really cold. I'm thinking either injector clearance has worn too tight, need some GP's, or combination of both.

@PowerStrokeTechTalkwARod 7 лет назад

+gr8guitarplayer ill put 1 up. Cld be just gp or some injs. Id test the gps 1st

@adventurousairman 7 лет назад

Crazy, I'm not sure why folks don't check there oil, I do it every fill up with fuel and I change my own, as I don't trust anyone else to do so. Hopefully that engine just didn't eat itself up.

@yoyokidkid 7 лет назад

people like that = job security for us...

@grantg98 4 года назад

The most important thing in ANY engine is to have oil, then coolant then gasoline. If you don't have the first two, having gasoline doesn't matter.

@C4soulja 4 года назад

That's one of the reasons it's hard to grenade a HEUI like the 7.3. It starves the injectors and the dont run. Not a good idea but a bit of a "catastrophic safety"

@brianhouk543 4 года назад

And they even had the oil capacity written on the cowl under the hood hahahahaha

@poweredbyford87 2 года назад

I used to work with a guy who would just run his 7.3 till it died in a parking lot, then add oil to it so it would start. Wouldn't get the leak fixed, but i never could get him to understand how this thing actually fires. He swears to this day that it won't run low on oil cause "it's a built in safety feature", and not because it needs oil to fire....

@PowerStrokeTechTalkwARod 2 года назад

It's not a "built in safety feature" it uses crankcase oil to not only lubricate the internals of the engine but also send that oil up to a high pressure oil pump which provided up too 3800 psi (@WOT) to push the guts of the injectors to spray fuel into the cylinder. No oil, no fuel injection. Gotta make 600 psi b4 the vehicle will start. Watch my fuel injector video...

@poweredbyford87 2 года назад

@@PowerStrokeTechTalkwARod oh i know, i just could never get him to understand that lol

@gr8guitarplayer 7 лет назад

Which dipstick we like better? I'm gonna guess not many of us have seen both to be able to compare. I personally have no complaints with my 7.3 dipstick, and I see it at every fuel fillup and oil change, and with 293k miles, I've seen it a TON of times. Ok, bout 500 times.

@PowerStrokeTechTalkwARod 7 лет назад

+gr8guitarplayer lol, well if ya did the 6.0 one, you'd prolly like urs better..lol

@dand7056 Год назад

What typically goes wrong with this IPR? Was the solenoid part bad or the valve itself, the part that screws in HPOP?

@rockyramjeet 5 лет назад

nice

@ricardogallardo3841 6 лет назад

Suscribed and shared by the way

@PowerStrokeTechTalkwARod 6 лет назад

Thanks so much, private messsage me bro

@ricardogallardo3841 6 лет назад

PowerStroke Tech Talk w/ARod how do i do that? And thanks for.the reply

@PowerStrokeTechTalkwARod 6 лет назад

Goto my channel, request the desktop version if your on your phone, look for About under my channel Art. Private message is in there

@sinnerslikei 2 года назад

7.3 for sure on the dip stick.

@joshuaharp2136 5 лет назад

Is the motor still in Good shape are bad because it ant have no oil in it

@richardrajner6052 6 лет назад

Did it end up being the IPR? I have the exact symptoms but I know my oil is at the right level

@PowerStrokeTechTalkwARod 6 лет назад

Yes it was!!

@2000Diesel250 7 лет назад

You need 500psi for it to start.

@254triple2 7 лет назад

I was gonna say that my dipstick in my 6.7 is made possible because Ford doesn't use speedometer cables anymore and they had to use the inventory for something:)

@PowerStrokeTechTalkwARod 7 лет назад

+Dale Park lmaooooooooo

@williamuskoski1385 5 лет назад

My 7.3 is doimg a slow cold start and an almost no hot start. New icp and batteries with a decent starter. Wanna diagnose it before throwing parts at it. Thanks

@PowerStrokeTechTalkwARod 5 лет назад

Gimmie ur email mista

@robertkurtz7587 5 лет назад

I have a 96 7.3 - I'm thinking I need a cpm- cranks , won't start- no wts light and my hydra tuner won't turn on - I checked if the chip was loose it was not - Checked all fuses all good - oil good - I looked around the fuel bowl for any issues that would cause a short - I think cpm is accurate but anything else it could be - both batts read 12v also died while driving

@PowerStrokeTechTalkwARod 5 лет назад

The fuel heater element under ur fuel filter has mostly likely came loose and has shorted out against your fuel bowl. Better recheck them fuses brah

@LUMP1713 7 лет назад

that's crazy that you put 7qts of oil in that! also cool how you oil in from that hose! and people shouldn't own a vehicle if they don't know how to check basic stuff like oil and filters! smh

@revrjackson 3 года назад

Looking for help, recommendations, or resources. I have a Ford 1995 7.3 F250 manual with 150,000 miles. I have a starting issue. For the most part it is sporadic and happens when I cut off the truck and try to start it again after 10 or 15 minutes. It will turn off but doesn’t start. If I wait about 30 or 40 minutes it usually starts right up. I have had it not start a couple of time (one of which currently now), after sitting a few days. But for the most part it always starts after it sits for a day or more. The last time it didn’t start after sitting for awhile, it just started again a few days later. Any help tracking down the problem would be greatly appreciated.

@bobbybob5718 2 года назад

I hope you have found the issue, but if not. I had a VW that had a similar issue with it, I never found the issue but my brother who is a mechanic said it sounded like it was possibly a ground issue. The conversation happened well after the car was gone so I was never able to look into it.

@ricardogallardo3841 6 лет назад

Hey man, my truck recently brlke down on me. Have replaced the L-POP and the idm. I replaced the icp sensor and the ipr sensor. The truck did run at first and neber died on me again. As soon as i parked it a d shut it off. It wont start again..... any ideas? Thanks for the video man. Very clear, profesional, and helpful. 👌👍

@PowerStrokeTechTalkwARod 6 лет назад

You need 2 contact me, private message me n we can talk

@michaelphillips5025 2 года назад

Mine did the same. I can't figure it out

@brianskinner4328 7 лет назад

What is it with people not checking oil? Even if they haven't changed the oil it's better than no oil at all

@Docstantinople 7 лет назад

How on earth do you let a vehicle run out of engine oil and not realize it? this is mind blowing

@jamesb1988 Год назад

Especially a 7.3... the oil is what fires the injectors.

@youknow9328 Год назад

Or thru the injectors ..

@jamesb1988 Год назад

@@youknow9328 fires them, goes through them, Chinese, Japanese, dirty knees look at these. It's all the same, baby.

@billmalec 4 года назад

Notice someone wrote 15qt on the front cover there to like remind them it takes a bit more than 5. 😉

@PowerStrokeTechTalkwARod 4 года назад

Hahaha

@rberth9016 5 лет назад

10:47 "I know I have a... bunch of SQUEAK!!!

@fransiscorios7799 3 года назад

How much Costs A diagnostic For a 7.3

@brad11344 6 лет назад

Thank god these shut down when oil is low

@PowerStrokeTechTalkwARod 6 лет назад

Yepp

@antidiz 6 лет назад

I'd put at least 10 in, minus what the filter has

@korbynbrown3057 2 года назад

So I’ve got a 03 7.3 and I replaced ipr and icp sensor but had a great compression removed the ipr and put new one in now no compression at all any ideas?? Have a no start issue as well

@PowerStrokeTechTalkwARod 2 года назад

That makes no sense

@zfilmmaker 2 года назад

Have you done a video on what modules, etc are reset, need to be reset, etc. when a 2017+ looses power (both batteries disconnected)?

@PowerStrokeTechTalkwARod 2 года назад

None

@zfilmmaker 2 года назад

@@PowerStrokeTechTalkwARod thanks for the response. I upgraded to X2 AGM’s one at a time and only had half power, no start. Called dealer and service told me disconnecting both batteries would lockup several modules and sensors but as a last resort I did it anyway and was able to start the truck.

@PowerStrokeTechTalkwARod 2 года назад

👌

@1911customz 5 лет назад

What was the sensor to the right for the IPR? The silver/aluminum sensor?

@salvatoretripi4145 4 года назад

ICU

@joerodriguez5013 7 лет назад

Did the ipr fix it? I'm having the same problem with mine

@PowerStrokeTechTalkwARod 7 лет назад

+joe rodriguez u damn right it did

@chevyman6975 5 лет назад

Love those seven 3 those engines are getting hard to find at least here in Florida where I live

@PowerStrokeTechTalkwARod 5 лет назад

Yepp bet they are lol

@lonniefleming4034 2 года назад

On the top cowl at the front it shows 15Qts in yellow paint!

@PowerStrokeTechTalkwARod 2 года назад

@brianskinner4328 7 лет назад

Sorry about venting. It just urks me when there's lack of maintenance

@LukeTehGamer1 7 лет назад

definitely wanna see the oil cooler for the 7.3

@PowerStrokeTechTalkwARod 7 лет назад

+LukeTehGamer1 is that a request or a demand!?!?!? LOLOL LETS SEE HOW MANY REQUESTS I GET - ILL DO ONE. COME GUYS LET ME KNOW!!!!!!!!!

@LukeTehGamer1 7 лет назад

DOOOO ITTTTT! lol ipr valve fix it? or do you think its a bad high pressure pump?

@PowerStrokeTechTalkwARod 7 лет назад

+LukeTehGamer1 OK THATS 1, 1600 TO GO!!!!! My test IPR fixed it. The engine fired right up. I got the new 1 from parts be4 i left. Thanks 4 watchin

@LukeTehGamer1 7 лет назад

1600 , damn

@PowerStrokeTechTalkwARod 7 лет назад

+LukeTehGamer1 imagine if i had 20,000........jst 1 day maybe

@BestBettsPools 7 лет назад

I can't believe the donkey didn't even check the oil level before the truck went in. That's embarrassing.

@gratefulhead2833 5 лет назад

Helped him narrow it down!

@Rift45 3 года назад

Sounds like a compression skip when you crank it too

@Rift45 3 года назад

They kill a piston with ether maybe

@tony.getatme6227 5 лет назад

I have a p0237 on my 2000 7.3 excursion. I have no oil pressure and i chang the ipr valv. No start. Problems happened after rain. If the pcm were damaged the hpop would stil work right? I would still hav oil pressure right? I removed icp sensor and it should of shot oil out when i cranked but nothing. Hpop is bad isnt it? Or did the pcm get shorted?

@tony.getatme6227 5 лет назад

Help me guys. The fusebox was corroded and i changed it, the icm, the glow plugs, the glow plug module changef also, ipr valve and still no start. Just cranks no smoke. Help me man

@PowerStrokeTechTalkwARod 5 лет назад

Your gonna need to get a scanner on it that you can monitor sensor data. No smoke means your injection hasn't start. If your not getting any high pressure oil your gonna need to make sure you have oil in your reservoir from the base engine oil systrm. Make sure you have good power and ground to the IPR valve. Sounds like you have a lot goin on mann.....

@brianskinner4328 7 лет назад

It looks like it's low on coolant as well

@AJ-di3xd 7 лет назад

If someone had an aftermarket tune and had removed emissions equipment, could you still troubleshoot the engine? I use EFILive which will read codes, but your PC seems to do much more diverse/indepth troubleshooting. Also, in a previous video you had to program misc parts through the ECM, I believe. Can that be done with an aftermarket tune installed? TIA

@PowerStrokeTechTalkwARod 7 лет назад

+Allen Baker yes i can still troubleshoot the electronic engine controls. The computer program I use is Ford only. Can not do other manufacturers. Yes it is very in depth. As long as I work at the dealer, I will NEVER buy a scan tool. This is the 1 you want if your Ford only. Lastly, no. You have a tune, i can not program any modules.....or ones i should say that have anything to do with the engine. It will wipe ur special program out and then my friend ur S O L....

@AJ-di3xd 7 лет назад

PowerStroke Tech Talk w/ARod Good to know. Thank you for your quick reply!!

@PowerStrokeTechTalkwARod 7 лет назад

Allen Baker no sweat, its what i do!!

@frankback7240 3 года назад

What diagnostic software you running?

@PowerStrokeTechTalkwARod 3 года назад

Fords IDS

@maynardvernepineda3845 5 лет назад

Hi! I need help with my ford e350 2002 model 7.3 engine. It Suddenly died and no start just cranking. I removed the wire of the ICP and still didnt work. I replaced my IPR with Brandnew IPR and still got nothing. Just cranking and no Start. Thank you!

@PowerStrokeTechTalkwARod 5 лет назад

Try a cam sensor....

@beccaweller1083 4 года назад

I could use some help on my 2000 7.3. It is cranking but no start. No smoke, also the tach does not move while cranking. It’s got compression. It got harder and harder to start then suddenly it quit starting

@PowerStrokeTechTalkwARod 4 года назад

Hmmm. Only way to help is email...

@billygildark4565 4 года назад

There’s a green 30 amp fuse on the interior fuse panel that when the fuel bowl heater shorts out blows and won’t fire the injectors... Worth a quick check Normally associated with a no wait to start light.

@angelomallozzi7933 11 месяцев назад

@@billygildark4565o onin I8nno

@cgonedfishing Год назад

is IPR same on a 6.0!

@jeffkovene4420 3 года назад

My 7.3 E350 will not start unless left plugged in for an hour or more. Can you help me diagnose? It has new gp's, new gp relay, new uvch's and all tests show gp's are in fact getting power.

@PowerStrokeTechTalkwARod 3 года назад

Powerstroketechtalkwarod@gmail.com sry going to have to pay, to continue...

@estranged85 5 лет назад

My 1996 7.3 psd with 250k miles. Stock. Have a intermittent crank no start problem. My scangauge shows ICP=0 when cranking. IPR 14.8 at key ON. it has no oil on the stock ICP sensor connector. When it doess start it has good ICP and IPR Readings but can have a rough idle with the Engine shaking a bit. the sensors are so expensive and take several weeks to ship to my country so i don´t know if i should order a ICP or IPR... I have a spare CPS sensor but i don´t Think it´s a bad CPS. Shows no CEL or No codes. Passes injector Buzz test.

@PowerStrokeTechTalkwARod 5 лет назад

Probably an IPR but be4 u buy check the oil reservoir and be sure it is full. If not IPR is not ur problemo...

@estranged85 5 лет назад

@@PowerStrokeTechTalkwARod thanks I'll check the reservoir

@Inspironator 7 лет назад

Whoever put the oil in probably thought it was like any other gas pickup. After five, he added 6th, still a no show on the dipstick. Okay, add another quart, that'll do it! Still a no show. Okay, better stop at 7...don't want to overfill it! :))

@PowerStrokeTechTalkwARod 7 лет назад

+Inspironator hahahahah lmaooooo

@adagata1 7 лет назад

yea its probably happened before because they had to write 15qt in the engine bay so that the jiffy lube guy doesn't kill the motor

@1AXMRDR Год назад

Sounds like he has leaky orings on one or more of the fuel injectors too. Uses oil but doesn't leak it.

@deepaklopez7436 8 месяцев назад

how can I prevent head gasket blown on 6.0l ps if I ever had one? No tuner, and do proper maintenace??? But i knewcoolant very sensitive to head gasket?

@PowerStrokeTechTalkwARod 8 месяцев назад

The head bolts are what stretches and cause coolant to blow out of the bottle

@deepaklopez7436 7 месяцев назад

@@PowerStrokeTechTalkwARod hmmmm, okay is there anyhting to prevent that like maintenace yearly and keep eyes on coolant bottle plus stay stock all the time?

@carpenterfamily6198 4 года назад

Can anyone recommend quality service for a 2002 FORD E350 7.3L Diesel in Northeastern Pennsylvania ? ( Nov 2019 )

@PowerStrokeTechTalkwARod 4 года назад

Sry bud, i dont

@Chief726 7 лет назад

I really like how you always include the mileage of the vehicle you're working on. Being a "gasser" guy for most of my driving history, I'm always amazed how you're never surprised by some of the high miles on many of the Diesel engines. Can you let your viewers know an average of "number of miles" you've seen on the majority of the Diesel engines you work on? Also, what is the most you've seen? Thanks!

@PowerStrokeTechTalkwARod 7 лет назад

+Gip Giper i usually ALWAYS have something between 110 and 180....mostly always. Got a lot high ones too...200ks for sure. Had 2 put an injector in a 6.0, 06 i think from Arizona.....875k miles. Got a 6.7 rollin around somewheres with 475k, deleted everything. Always in 4 maint!

@PowerStrokeTechTalkwARod 7 лет назад

+Gip Giper thanks thanks too!!!

@mccormicklucas451 7 лет назад

You can't kill a 7.3 if you tried. Hopefully it isn't the pump.

@johnsandoval2302 5 месяцев назад

So was it the IPR valve

@clittle1559 4 года назад

Sounds like a cracked ring also ,that crank sounds weak and unbalanced compression

@jerryknorr679 5 лет назад

Good video a shame how people take care of there trucks

@alshegarfi7338 3 года назад

I knew the 7.3 needed 500 PSI to start. If I’m not mistaken GSB G0000086 says 500 PSI for 6.0. I’m surprised IDS gives ICP pressure. PC/ED section 6 only says that ICP for a 7.3 is in Volts. I’m wondering if the NGS ever read psi for a ICP.

@alshegarfi7338 3 года назад

Thanks for the Vid, hotline just learned something from you. I had no idea IDS could read ICP pressure. Can the IDS read icp pressure on a 97 96 obs?

@PowerStrokeTechTalkwARod 3 года назад

Yes it did. I still use it 4 those realics

@PowerStrokeTechTalkwARod 3 года назад

As long as its EEC-V IDS will be able to read data. Very primitive but will still read...

@alshegarfi7338 3 года назад

@@PowerStrokeTechTalkwARod good to know thanks. I always appreciate a technician that’s willing to teach. I’ve learned just as much from technicians as I have from Ford.

@PowerStrokeTechTalkwARod 3 года назад

Awesome🙌🙌

@jacobprice6535 5 лет назад

Got a 7.3 to and it will start and then die what could that be and I checked the oil lol

@tiffanydoss611 Год назад

What was the fix?

@ReggieRailSystems 4 года назад

Did the IPR VALVE CHANGE WORK TO START IT?

@PowerStrokeTechTalkwARod 4 года назад

Yes

@marcotesta8651 3 года назад

@@PowerStrokeTechTalkwARod hi my name is MARCO. I have a no-start condition on my 7.3 L I replace the camshaft position sensor IPR it just cranks and cranks I'm trying to keep my battery is full my pressure oil pressure gauge up sure if I have enough what else can it be. It's not icp cause when I disconnect it it sounds different cranking

@PowerStrokeTechTalkwARod 3 года назад

U need 2 put a scan tool on it, to monitor your sensor data