06-08 Dodge Ram radio removal in less than 2 min 

15 years later and you just helped me… amazing thank you so much

Why can't everyone's videos be short and sweet, down to the bone, like this one?? No one wants to waste their lives away watching someone undoing a freakin screw...! Job WELL DONE! Thank you, sir!

How did two ppl not like this video? It's short and strait to the point. Great video.

damn in 2 minutes you showed us what other guys would in 20. kickass tutorial thanks alot

Best video out there, absolutely no nonsense. I love high production people.

Thank you for posting such a great video. I used them today to get to and replace the auxiliary power outlet on my girlfriend‘s 2006 Dodge Ram 2500. Her truck was an exact match. Every screw was exactly where you pointed out in your video. It was a great help. Thanks again.

Wow! Short and sweet, to the point, and no babbling. This should be a model for all 'how to' videos/shows. Oh, and thanks for the insight behind the the major trim piece, didn't know exactly where to grab a hold of it.

Great video, and in under 2 mins, well done sir, well done!

THANK YOU! Your instructions worked perfectly on my 2008 Ram 2500. You sure saved me a lot of time and effort!

I've swapped out my stock radio already but didnt know where the screws were, but this video is a big headache relief.... and its also the same way for the the 6-speed manual transmission...

Thank you. This was a big help in installing an iPod cable in to the stock radio/gps in my 3500 Mega cab. It took about an hour and would have taken much longer if I had to figure it out for myself. My thanks to you and all who take the time to post these instructional vids.

Pay attention content creators.. this right here is how to do a tutorial. Well done.

its been said before but hey awesome video and can you thank the camera person for also doing a kickass job!!!!

My 8mm bolts were covered in dirt so I had to scrape clean. Then hook my back to a McDonald’s straw with a tape ball reducer to clean. So 45 minutes. Thanks for the great video.

i almost broke the face plate thinking it was going to pop out.. thanx for the video helped out alot. saved me time and money by goin to someone for them to pop it out.. thanx alot

Awesome video. An asset to RU-vid tutorials. That's how you do it!!!

Best description from tools needed 👌 to order of work to be preformed. Thanks

short and sweet no BS perfect thank you

thanks so much!!! I was stumped til I watched your video. appreciate the share!

Awesome info ... worked for me cause I had to replace 3 bulbs behind the heater console ... thanks for the great video ....

Well put together. This saved me a lot of time. Thanks!

Right on! You actually shown me I can tap into one of those un-used connectors and get 12 volt power. Thanks Man:)

Thanks man. You save me a headache trying to figure out how to get that sucker out of there.

Thanks for the video!!! This helped me get my REF radio out and replace it with an RAQ! Very big help!!!!!

Not sure why you have any dislikes. Got mine apart very easily, even with the 6 speed in the way. This was extremely helpful. Thanks bro!

Thank you you saved me a big pain in the ass..trying to get this apart..

Thank you. You are the GOAT

Quick and to the point! Thank you!

all in less then 2 minutes great video it really helps

Thanks for the refresher. I did it before but its been a few years since I had to do it. lol

Nice one,saved some headaches and thrown tools for sure

Thank you very much! That was a great video!!

Nice job, thanks for showing us, now I know where to get the feed for some lights for my cup hlder.

Fast and helpful thank you

Very imformative. Thanks. Why dodge thought of putting all these mixed pieces connected together its like a maze to get to what you want to take off.

THANK YOU THANK YOU THANK YOU. You saved my bacon. I needed to know this to install my CB.

Awesome easy fix..... your awesome

Thank you ! you saved me money and time great job man

Pro tip for you guys also, Once you have done this once if you’d like to never have to do it again to simply remove the radio dash part by pulling on it like he did at the end of the video then do not reinstall the final two screws when you put it all back together

Hella helpful and no bullshit

Thanks, kept me from breaking my dash1 :)

KICK ASS VIDEO thanks this video really helped me out!!

Thank you. This was very informative.

Thanks for the video

Very helpful and to the point.

Thanks very much, the video was a big help.

Nice video, helped me a ton! Thanks!

Why bother removing all the lower console stuff when those two screws are easily accessible without doing this?

You rock. Thanks

thank you very much it really helped make it easy great job!

@BigBalthazor have you ever had any problems with the lights on you heat controls.? mine are half working right now and sometimes if you flick the heat controls with your finger they turn on for and work for a few days then slowly go out, the flick trick doesnt seem to work anymore, any sugesttions? replace the bulbs maybe?

Cool video! I've had a weird issue with my volume not being able to turn up past 1. My radio will turn on and everything, but the volume won't adjust. You know what that might be? Also my cruise control only works between 66-73mph which is really weird?!

Question for you- all the aftermarket stereos are just a rectangle how will they mount on the ram with the volume and tuner knobs cutting out off the sides?

I was hoping you could help me with a question that I have on my truck. The high beam blue light indicator is extremely bright and irritating at night. Is there a way to get a dimmer bulb or a way to dim it somehow??? Thank you.

Great video, do you know of any radio that could replace the original one?

Fuck yeah!! Now that's a fuckin tutorial!

thanks, this worked out great for me too!

If I pull any harder on that upper section it is going to break my dash into pieces. I have tried wedging it off with screw drivers and everything else I can think of. That upper section will not come off. This does not work.

Do more videos.

Is there a radio wire diagram label on the radio by any chance?? before i just pull the radio out?? I have a single cab 07 dodge, and since there are soo many models of dodges out there, really hard to find a proper wiring diagram online.

Do we apply the tint to the bulb itself or just in the hole? Thank you!!!!

which wire harness did you use? Im in the process of doing the same thing in my 06 ram 1500.

I have a 2007 looks exactly like yours.... just making sure that this (stock) is a single din unit correct?

Bro, Thanks for the help!

Please make a video on how to make videos.

I took my radio out and it obviously left a huge gap I accidentally put my ring there and forgot about it now I can’t get it out any help on how I could get it ?

Is it basically the same with a center console style truck?

Thanks a lot!

Please specify only for manuals before someone clicks on it with an 08 that’s different

yeah bro, thanks alot

Thanks man

does this radio work on a 2005 chrysler 300c? Please let me know.

you dont have to unscrew all that!!! all you have to do is gently pull the dashbezel back all it has is pins hodling it lol

Thanks!

Great fing job bra

Thank you, :)

How to install ddx419 Kenwood in a 99 dodge ram 1500 ! Any one can help me?

Less then 2 min because he had all the screws out already lol

There’s no reason to take out the cup holder

That's not the interior of a 2007 or 2008

So I didn’t need to rotozip and oscillator.. your tellin me this shit snaps off?? Well all beee .. shitttt..

single din or double din??

this is soooooooooooooooooo much easier to do on the 03 ram 1500

All this work is unnecessary....the wood grain bezel pops right out. Giving you complete access.

than*

I didn`t make the video..but k

Jesus loves you all

@turbopens87 chrysler stock radios are shit

Thanks!!!!