1/24 Audi R8 LMS GT3 Full build 

this is also good way. i will test it somehow👍

thanks a lot. i dilute it ca. 50/50. then 1 thin coat + 3 wet coat. i use also 2k, but at that build i had only LP-9 :)

thanks mate 💕

喜んで。 あなたはこれらの場所を説明することができます

Thanks🏎✌

may be, yes ¯\_(ツ)_/¯

Come in man, I can have dreams

Glad you like them! ✌

thanks for watching! I will be happy to continue to do something interesting for you （￣︶￣）↗

very much thanks to you =)) scaleauto shop works 24/7 on it 😁

Glad you liked it, welcome everytime🙌

thanks for your reply, i will try to make videos more informative👍

thanks man! yes, try to make some black edge to imitatte rubber sealing around clear parts, that gives some realistic.

😂 ok, next time will add

thanks, yes i like the result✌

i mark seam lines and than try to sand green color down (best to take a black marker, i had only green at that moment) and therefore you will sand seam lines also. Other tool is just one of carving tools, there is a lot on the market.

thanks a lot ! (accidentally, I subscribed to you for a long time) ✌

@@Scaleautoshop Thank you. I came across your channel today and I must say you have some great content. Really like your builds step by step. Subscribed 👍👍

that s silicon brush

Saya boleh terjemahkan dari bahasa Melayu :) terima kasih atas komen yang bagus! Saya mengambil runut suara dari perpustakaan RU-vid, kelantangan muzik boleh dibuat lebih senyap :)

thanks for comment👍 tyre stencils are from detail up set for AMG GT3 , article number HD02-0364

Thank you, Jeff, now I have to see what I did there 😀

Thanks! this is "NuNu model kit" www.1999.co.jp/eng/10605290

thanks mate, i appreciate your opinion

we learn all our life :) If you mean the brand, I don’t know, the label has long been torn. This cyanoacrylate adhesive is not so super liquid and has approx. 20 seconds to bond parts. (to weld parts and for transparent i use other glues)

Thanks for the information. I really enjoyed your videos.

@@huatongleong3674 the adhesive/ cement in the video I believe is "Revell contacta professional cement" I used/ use it from time to time, it works quite nice. I personally love the precision of the metal nozzle tip/applicator. Hope this helps :)

Thanks Richard👍👍👍

after primer i use 2000, before clear was nothing.

Thanks Rick! i did not understand what you meant -> explain directions

@@Scaleautoshop some sites waste time in their video trying to explain the instructions from the kit. If I'm building the kit ,I can see the instructions for myself. You just built a beautiful kit,and broke it down for us to see.

Yes, I showed a finished car for a very short time. But there is a lot of photos in my instagram

Hi, thanks! 3 coats

Thanks man! scriber and pin vice drill look for "DSPIAE hand drill" and "DSPIAE Clamp Holding Handle". You can find it also at aliexpress. About seam scraper i cannot say a lot, this is no name scraper for sculptors or dentists i don't know :)

Scaleauto shop thank you so much for the reply😁

thanks mate. i have not heard about rc Kyosho. i will check it. very good idea👍

welcome mate! this antenna was in detail up set as turned part

@@Scaleautoshop ... thanks, i will keep looking your buildings

😄 the copyrights cut everything

Oh man, polishing takes about 8-12 hours as usual. Maybe others will do it quickly. in my case it takes a very long time and is not always perfect. I often rub up to the primer layer and so on.. I also have a 2k clearcoat zero paint. Only the bottle with the hardener suddenly hardened completely and while I was waiting for a new bottle, I used Tamiya's LP. They are all gives fast the same effect. The only thing that zero paint is a true automotive clearcoat and according to my observations it is very thick, it must be polished even if it is smoothly laid. Otherwise, the model will have a "caramel" look.

Glad you enjoy it!(～￣▽￣)～

Glad you enjoyed it, Thanks :)

thanks for the comment! Yes, I thin all the products that I use in the spray gun, the consistency should be milky. This is normal for decals. just the first layer should be thin.

thanks mate.. technically i use micro sol + hairdryer. other thing is that i make it for a some years :)) look other parts (3 or 4) there is more detailed.

Tom will not subscribe to the garbage 😁

日本のことわざを知っています 断じて行えば鬼神も之を避く (だんじておこなえばきしんもこれをさく) そしてあなたは成功するでしょう

Glad you liked it!

tire stencil was from old projects (it was detail up set from hobby design). do you mean NuNu ? yes they make also more kits.

Scaleauto shop I was wondering if I could find stencils for Goodyear, Michelin and Pirelli. Do you know where I can buy them?

There is a lot stencil in detail up sets. Pirelli was in Hobby design AMG GT3 detail up set. Studio27 makes also much stencils

any glue for transparent parts. i used revell contacta clear

maybe because of that, you are right. In my instagram there is a lot of detailed views of this model.

Hi, thanks! this is silicon art brush

sorry for late answer. Red paint was mixed color from Zero Paint ZP-1636. To sit the decals well you need a good solution like a Micro-Sol and hairdryer.

Thanks (‾◡◝)! I Heat PE parts to make it softer to bend. Sometimes just for heat stains effect like a real.

And that is also the reason, yes 😁. Moreover 2x speed

tamiya is ok to ZP, vallejo and Mig - i am not sure.

Thank you, I will

yes, i use both paints. For interior it doesnt matter, i just use paint that i have available.

Hi, thank you:) i use revell contacta clear.

thanks ✌

thanks Jamin 🏎✌

this is custom shaped sculptining tool

thanks *^____^* ! this is a 3d printed wheel that i modelled in CAD to help me sanding tyres.

thanks for watching. :)

He probably still goes away thinking he could have done a little better.

Thank you very much! 🙌

Thank you! Cheers!

merci beaucoup 😀✌

thanks, you are right. Need a lot of patience, nerves.. :)

Thank you very much!

привет ! не собираю, т.к. это дорого получается

And, what airbrush did you use? Sorry if I asked a lot :P

Thanks a lot man🙌 i use sony hdr cx625 (i wouldnt say that quality top, but it lightweight and small)

no problem, the more questions the better ✌. Harder & Steenbeck Evolution Silverline needle 0.2 and 0.4 mm

@@Scaleautoshop hey love the answer man. Thanks a lot!

Thanks for the visit （￣︶￣）↗

i have not sold yet, but ca. 150 i think.

@@Scaleautoshop canadian dollar ? let me kno ur ig, we chat there

in usd. you can find me as scaleautoshop in IG

Thank you! Cheers!

i did it in 3d myself and printed

Scaleauto shop that’s an awesome idea!

hi! sorry i dont have at the moment all the links. the tools were buyed a long time ago..:)

you have a good taste bro 😁🏎👍

yes, the same, just in bottle.

thanks for reply! i open the airflow valve and then give a paint almost simultaneously. The volume of paint usually i limit with the stopper at the airbrush. It depends on the task i do.

@@Scaleautoshop Thanks for the response!

はい、私は超接着剤（シアノアクリレート）を使用しています。薄層で追加する必要があります。

thanks! yes they are vinyl on the cars, but on model they won't live too long. I need to cover them with a clearcoat.

Awesome, thank you!

maybe due to copyrights it was cutted

Thanks man:) there is a lot of people that don't like it :)

this is silicon brush

it taken about 120 hours (i manage timetable for all work :) )

Good choice :) we are waiting also for a bmw m8 :)

there really is no difference, it was possible to paint as well

not full detailed , just for curbside look

with this model was spent about 120 hours🛠

@@Scaleautoshop that makes it an item very valuable, great passion

that's why i don't make commission builds, but as a gift is still ok :)

i use revell contacta glue (butylacetat) for normal plastic, revell contacta clear for clearparts, and CA glue for metal or sprayed parts (glue brand doesnt matter, use any CA glue)

Thanks for your reply. Have a nice day

Thanks Brad ! :)

coarse? yes i have one. at which timemark is that?

i think it was removed due to copyrights

hi man thanks! this is home made tool (i printed it on 3d)

Scaleauto shop. Nice... it looks like it works well. I have made my own but I think I like yours more... cheers

thanks, minidrill is a cheap 20$ battery powered noname drill from aliexpress😁

i am glad that inspire you , thanks !

Welcome aboard!

Hi Simon, thanks! this tool i made in CAD and 3D printed it.

Thanks for the reply! If you ever decide to make and sell those please let me know, I would definitely be interested in purchasing one.

Hi, thanks! you can search in google for "art silicone brush". that is what you asked

Scaleauto shop Thanks a lot! Great solution. 👍🏻

gracias, también me gusta este color 🌈

👏👏👏👏👏👍😃

look on ebay or amazon. there is a lot of offers. silicon art brush

cool, i have another one r8 and aape livery. do you have insta or something where you re sharing work?

@@Scaleautoshop sadly no Also the livery "material"matte gloss or powder

Thank you! Cheers!

thanks man, i am working on it🛠🏎

У меня аэрограф Harder & Steenbeck Evolution Silverline. Иглы использую 0,2 и 0,4мм.

thanks man ! :)

Thanks :)