1/24 Lancia Delta S4 '86 San Remo rally. Engine detailing. NuNu 24005 #4

Подписаться 23 тыс.

Просмотров 42 тыс.

50% 1

Hi guys! Today we will have a long video with engine detailing. Let me remind you that in this series we are building NuNu's Lancia Delta S4.
Since in this model the engine is given in some detail, we have a little space for creativity. I had to look through a lot of references in order to understand which wires, hoses are used, and most importantly, how they are connected. For detailing, I used many different wires, transparent pipes for the fuel line, imitation of flexible metal hoses. In addition, I created 3D models of components that were not in the set and printed them. Fans of technical accuracy, do not judge strictly, I could be wrong in detailing due to insufficient information on the real prototype. The whole work took a very long time, about 75 hours. I hope you will enjoy!
Thank you in advance for watching and see you in the next video:)
playlist for full serie:
• Lancia Delta S4 '86 Sa...
social media here:
Facebook / scaleautoshop
Instagram / scaleautoshop
Scalemates:
ongoing projects www.scalemates.com/profiles/m...
projects on the shelf www.scalemates.com/profiles/m...

Хобби

Опубликовано:

14 фев 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 198

@Wtf_is_a_Matra 3 года назад

And how is this possible, that you have only 12,6k subs? Nice and beautifull engine!

@Scaleautoshop 3 года назад

may be because i don't buy subs and views 😃. thanks for viewing👍

@bertholdbouman3007 28 дней назад

Wow, what a build! And what a power such a relatively small engine has, thanks to the twincharger.

@siggihabermeyer6229 2 года назад

Close to perfection

@Scaleautoshop 2 года назад

thank you !

@carsonridge8978 3 года назад

I've been building models for longer than I'd like to admit. Never have I seen your level of detail & attention. As far as accuracy, no race car is like any other. I doubt anyone beyond a team technician could find any fault. Great job.

@Scaleautoshop 3 года назад

thank you for comment, mate!

@chuckyboy6977 3 года назад

From tig welds made from glue to the the coil inside the heat shrink to keep it from kinking that was 29:49 of pure artistry. I’ve seen a few modelling channels but this is a few levels above all of them. 👏👏👏👏👏👏

@Scaleautoshop 3 года назад

thanks mate for such a nice comment for me 🤝

@thierryguillemenot9109 3 года назад

Incredible job, a real master!

@Scaleautoshop 3 года назад

thanks for visit mate

@mhh7544 7 месяцев назад

😮 Im a huge rally fan , and S 4 is my fav rally car. RIP Henkka and Sergio . Your skills are from the another galaxy .

@Scaleautoshop 7 месяцев назад

Thanks mate

@il_replicante_8730 3 года назад

Lavoro incredibile!! Bravissimo 👍

@manolosoldera 3 года назад

Ogni volta che vedo lavori così mi passa la voglia di fare modellismo😂 Anch’io ne sto facendo una(trovi il wip su mab modellismo alla buona)e non mi avvicinerò neanche lontanamente a questo pezzo d’arte

@Scaleautoshop 3 года назад

Lo stesso posso dire quando vedo il lavoro di Alessandro Prini 😂 Grazie Ragazzi

@romanrufianrodriguez8654 3 года назад

Amazing bro👏👏👏, this kit is brutal👍👍👏👏👏👏

@Scaleautoshop 3 года назад

Glad you like it Roman🤝

@taxman9910 Год назад

I have been building models since I was teen I am now in my 50s. I consider myself a modeler but you my friend you are not a modeler, you are an artist with God giving skills. Thank you for sharing.

@Scaleautoshop Год назад

thanks my friend, your comment give me more inspiration ❤

@raphanunu6912 3 года назад

You kill me once again... I'd love to only approach your skills.

@Scaleautoshop 3 года назад

Thanks mate that you watch it

@davidnash1220 3 года назад

Mind-blowingly brilliant 👏

@Scaleautoshop 3 года назад

thanks mate!

@julesachard4903 3 года назад

You brought this kit to the next level !! :o

@Scaleautoshop 3 года назад

Thank you mate :)

@frantahujer8317 3 года назад

this is absolutely the most perfect model I could ever see on yt and this modeller is for me the biggest star there is on yt !!! absolute master !!!!!! I'm a fan of you !!! wonderful work it just can't be found !!!! GOOD LIUCK TO NEXT MODEL !!! SUPER !!! WOW !!!!!!!!!!

@Scaleautoshop 3 года назад

Thank you so much 😀

@chrisjones1798 3 года назад

That was just sublime 👌👌👌👌

@Scaleautoshop 3 года назад

thanks for watching :)

@clne36 3 года назад

My goodness man! You truly are an artist. The level of detail is incredible, absolutely stunning. You have got to be the best on youtube.

@Scaleautoshop 3 года назад

Wow, thank you!

@bigchef2112 3 года назад

Love your use of putty and styrene to simulate weld lines. Ingenious!

@Scaleautoshop 3 года назад

thanks:) styrene weld lines are easier to make, but putty can take any complex form.

@ScaleModelExperiment 3 года назад

I watched this video on my TV. If you view it on a phone, you miss most of what he is doing. I was amazed by all of the tiny detail work you did Oleg! The tiny fittings, the welds, the wiring... you made this kit beyond belief. I’ll stick with box stock my friend 😁

@Scaleautoshop 3 года назад

thanks James that you spent some time to watch it :) :) :)

@FSHawkPL 3 года назад

The amount of details is just unbelievable. Thank You for sharing. Great work. Cheers!

@Scaleautoshop 3 года назад

Glad you enjoyed it!

@TheRyatt 3 года назад

That is truly a work of art. Amazing! The detail is phenomenal.

@Scaleautoshop 3 года назад

Thank you very much!

@proudsamurott414 3 года назад

If I were told this is a real engine I'd believe it, incredible work!

@Scaleautoshop 3 года назад

thanks :)

@secret_one 2 года назад

OMG. That is incredible. The S4 is my next build, but I know it will never get anywhere near the quality of your build. Superb man, you are off the scale. Thank you.

@Scaleautoshop 2 года назад

You will get it, man. Thanks✌️

@alvarors4651 Год назад

Incredible job!

@Scaleautoshop Год назад

thanks mate

@benediktheinz5141 3 года назад

Deine Arbeit wie immer der Wahnsinn, soviel Details, das ist einfach der Hammer. Klasse Arbeit 😊

@Scaleautoshop 3 года назад

Danke Benedikt 🤝

@danielspencer2622 3 года назад

Beautiful craftsmanship, keep up the good work. Cant wait for it to be done

@Scaleautoshop 3 года назад

Thank you very much!

@paulthoensen6522 2 года назад

So awesome you a a great model maker.

@Scaleautoshop 2 года назад

thanks mate🤝

@kratos1011000 2 года назад

Amazing work mate!

@Scaleautoshop 2 года назад

Thanks for the visit👍

@kratos1011000 2 года назад

I saw the video like 10 times and I'm only beginning to absorb all that detail, really an inspiration, someday I'll post mine !!

@johnnichols9056 3 года назад

Wow, unbelievable, you've got MAD skills. Treuly stunning work.

@Scaleautoshop 3 года назад

Thank you very much!

@peterc6547 3 года назад

Scale modelling taken to the next level. Absolutely amazing. Thank you for sharing your skills.

@johnnichols9056 3 года назад

Any more realistic and we shrunk ourselves we'd be flying down a rally stage.

@Scaleautoshop 3 года назад

thanks for watching, welcome everytime :)

@racefanrob 3 года назад

You know how an engine is put together. And you know how to scale model too, a great combination. Well done, excellent work and I enjoyed watching your skills 👌

@Scaleautoshop 3 года назад

Glad you enjoyed it :)

@felixstiller8056 3 года назад

Truly a masterpiece, exceptional! And extra Kudos for the Need for Speed Porsche Menu Soundtrack at the end ;)

@Scaleautoshop 3 года назад

Glad you liked it! :) NfS is our all :)

@williamdaemke8859 2 года назад

WOW ! Imm 74 and know how to learn more, faster! U r really good. WmRD

@Scaleautoshop 2 года назад

thnks man!

@maximevanier7562 3 года назад

Wow amazing work man keep it up!!!

@Scaleautoshop 3 года назад

Thanks, will do!

@dirtyd2316 2 года назад

Amazing detail. Makes all my models look like a 10 year old built them. 😂

@Scaleautoshop 2 года назад

Thanks man :)

@damiengabillard9156 3 года назад

Chirurgical!!!! Much respect to your work!!

@Scaleautoshop 3 года назад

thank you mate

@D007F50GT1 3 года назад

The amount of datails is insane. Marvelous. The only thing that I don't like too much is the Kevlar decal. It looks a bit off in front of all that impressive work.

@Scaleautoshop 3 года назад

may be that is because kevlar is not weathered and looks vivid. thanks man!

@albatros7281 3 года назад

Realmente impresionante el nivel de detalle, los recursos utilizados, el ingenio en la creación...y un sinfín de cosas más. Espectacular!!

@Scaleautoshop 3 года назад

thanks a lot mate!

@sszandorszandor4703 3 года назад

what a epic engine ... well done very well done as always :)

@Scaleautoshop 3 года назад

Many thanks mate👍

@rajaramsivasankar6864 3 года назад

Love this build. It is tough to differentiate between the real car and the scale model! Keep it up! :)

@Scaleautoshop 3 года назад

Thanks! Will do!

@f.s.596 3 года назад

Really really nice again! Your detailing is just amazing👍

@Scaleautoshop 3 года назад

Thank you so much 😀

@s.lmodelistequebec.8925 3 года назад

Totally amazing! You are very skilled!! I’m far from that !! Thanks for sharing

@Scaleautoshop 3 года назад

Thank you! Cheers!

@asoscalemodels5044 3 года назад

Amazing work!! :)

@Scaleautoshop 3 года назад

Thanks a lot!

@robertriley4689 3 года назад

Measmeeising viewing my friend. You’ve done a fabulous job so far. Loving the engine rework and little details, they make a huge difference don’t they

@Scaleautoshop 3 года назад

Thanks Robert, yes, I really liked to do these details.

@1955mouse 3 года назад

awesome detailing, keep going!!

@Scaleautoshop 3 года назад

Thanks, will do!

@StaticModel 3 года назад

Clean build, level of details is superb!

@Scaleautoshop 3 года назад

Glad you enjoyed it

@taodej 3 года назад

new to the channel ,your work is inspiring , stunning attention to detail!

@Scaleautoshop 3 года назад

Thanks and welcome

@RJCModelsOfficial 3 года назад

That’s some absolutely beautiful work

@Scaleautoshop 3 года назад

Thank you kindly

@rayhope2846 3 года назад

Great 👍 Ray

@Scaleautoshop 3 года назад

thanks Ray

@sutt16v 3 года назад

Inspiring. Thank you.

@Scaleautoshop 3 года назад

You are so welcome!

@bravo3leader722 3 года назад

Da hast du dir richtig mühe gegeben!!!!!! Absolut der Hammer!!!!!!!!!!!

@Scaleautoshop 3 года назад

Ja, es hat lange Stunden genommen.. Danke✌

@bravo3leader722 3 года назад

Hut ab für diese Geduld und durchhalte Vermögen!!!!

@jarchambault69 3 года назад

Very nice job Tom. I think you do incredible work. I do remember telling you that I would like to see you do some super detailing and you telling me it was not your style...LOL looks like you are in the groove now. I hope to see more like this and see you continue to add even more details.

@Scaleautoshop 3 года назад

because this kit good suits to a little upgrade :)

@jijipe5117 3 года назад

It's a great job !!!!

@Scaleautoshop 3 года назад

thank you for visit :)

@michaelhintzmikesminiature1812 3 года назад

Really Nice Work!!!

@Scaleautoshop 3 года назад

Thanks for the visit Michael

@RT-dw3iz 3 года назад

Amazing job...

@Scaleautoshop 3 года назад

Thank you!

@marcelomenendez1971 Год назад

masterpiece

@paolocapecchi5182 3 года назад

That's a masterpiece!

@Scaleautoshop 3 года назад

thanks mate✌

@desmo865 3 года назад

so GREAT!!!!

@Scaleautoshop 3 года назад

thanks man:)

@user-mp4jp2ev6f 3 года назад

Шедевр

@Scaleautoshop 3 года назад

благодарствую :)

@andymurdoch1346 3 года назад

Fantastic work Sir, I'm sure that took many hours to do.

@Scaleautoshop 3 года назад

Yes it was many hours.. :) thanks

@keithsmodelsandrcs6593 3 года назад

Looks awsome buddy really like how it turning out

@Scaleautoshop 3 года назад

Thanks Keith!

@keithsmodelsandrcs6593 3 года назад

@@Scaleautoshop my pleasure buddy ur card shouldnt be much longer yet if it hasnt arrived already tjeres a delay in the irish post service wit all covid and my father inlaw just passed from it too not more than 3 weeks nearly anyway stay safe

@giusepperosato92 3 года назад

Amazing amazing amazing 🙌🏻

@Scaleautoshop 3 года назад

Thank you 🙌

@subzero191 3 года назад

This is awesome

@Scaleautoshop 3 года назад

thanks a lot :)

@crtzmo 3 года назад

Wonderful, methodical, minimal production here. I really liked the music and mood. Regarding your soldering, keep working at it! The basic problem is your metal surfaces are not warming up enough to receive the solder - you are making what is called cold solder joints. Keep the iron on your metal longer; once the flux boils, slowly add solder to the iron tip. It will flow to the flux once you have enough solder on the iron. Beautiful result, Oleg - I was wondering what happened to this model! Haha.

@Scaleautoshop 3 года назад

hi Сurtis, yes you are right. Soldering photo-etched steel is a headache for me. thanks for the advice👍

@udomartens3557 3 года назад

Einfach nur genial 👍👍👍👏👏👏❤️❤️❤️

@Scaleautoshop 3 года назад

ich bedanke mich 👍

@MauroCattelani 3 года назад

Amazing

@Scaleautoshop 3 года назад

Thanks

@MachineHead3 3 года назад

Absoluter Wahnsinn. Wie kann man hier den Daumen runter klicken???

@Scaleautoshop 3 года назад

Danke sehr:) Vielleicht schaut man das Video kopfüber 😀

@rzminicustom1678 2 года назад

amazing👍🏻👍🏻👍🏻

@Scaleautoshop 2 года назад

Thank you 👍

@rzminicustom1678 2 года назад

@@Scaleautoshop please sub my channel tq

@thomashaupt79 3 года назад

as usual incredible work! I wonder what you can get out of the similR Ford GT.

@Scaleautoshop 3 года назад

thanks mate. yes i need to start with similR someday..

@thomashaupt79 3 года назад

@@Scaleautoshop do you have a similR kit at home? I look for the pescarolo for ages but it is rare and to expensive on ebay

@thomaswild8727 3 года назад

Incredible work!!!! I started my Beemax S4 now and your videos help so much. Not that I’ll be even close to your perfection, but I’ll try my best ☺️ Quick question, which glue are you using for the photo etched parts? Thank you

@Scaleautoshop 3 года назад

Thanks for comment mate, i use CA glue for PE parts in mostly cases.

@thomaswild8727 3 года назад

@@Scaleautoshop thank you May I ask you which wires and joints you are using for your engine? Thank you Thomas

@thoshik Год назад

огонь!

@Scaleautoshop Год назад

спасибо :)

@martijnnelissen3457 3 года назад

A true masterpiece that inspires me a lot. Same as all your other video’s. Very interested to find out where you buy all your accessories (hoses, etc). Do you have links??

@Scaleautoshop 3 года назад

thanks mate! i have got them from the various on-line and warehouse shops. Just look in web.

@Hitterdoln 3 года назад

Amazing work and incredible details. Where do you get the tool that you use for decals at 16:06? Looks like some kind of silicone or rubber, but I don't know what to search for :)

@Scaleautoshop 3 года назад

thanks mate. look fot this tool in web as art silicon brush.

@Hitterdoln 3 года назад

@@Scaleautoshop Thanks :)

@bigchef2112 3 года назад

Awesome build bud. Love the engine detail. Are those the top studio hose connectors? Where did you get the tie wraps? Thanks

@Scaleautoshop 3 года назад

thanks mate. Hose connectors i printed myself. Tie wraps are from Czech truck model CTM 24081 Cable binders

@mik2117 3 года назад

This is a masterpiece! So many details. Is it even possible?! Did you try to start the engine? :)

@Scaleautoshop 3 года назад

Not yet, thanks :)

@henryprophete4879 3 года назад

Beautiful work as always. I have a question, where do you get your hoses and wires from?

@Scaleautoshop 3 года назад

Thanks mate. I cant remember all the shops. Ebay, hobby shops etc.

@joseantoniojimenezjimenez6519 3 года назад

Very good work!!! A question what kind of metal thread do you use??

@Scaleautoshop 3 года назад

thanks. i use copper wires 0,2-0,3-0,4-0,5 mm etc.

@edgarvc9112 Год назад

👍

@Scaleautoshop Год назад

🍻

@zooniethelazoon 3 года назад

Brilliant work. What reference material do you use for the extra detailing?

@Scaleautoshop 3 года назад

i looked for a tons of references - photos, videos in youtube.

@geppo9012 3 года назад

Quanta pazienza e precisione. questo è talento... bravissimo! posso chiederti che tipo di materiale usi per riempire al minuto 5:48?

@Scaleautoshop 3 года назад

Ciao, grazie caro amico. Questa è una fermata di mastice bicomponente "Tamiya epoxy putty"

@user-mz8ft3rv3y Год назад

Олег, это божественно! Подскажите, an фитинги напечатаны на 3d принтере? Можете ссылкой на модель поделиться?

@Scaleautoshop Год назад

Привет, спасибо большое! Фитингов к сожалению нет, но они не сложные их можно самому нарисовать в простом редакторе. или Найти на бесплатных 3д ресурсах.

@clne36 2 года назад

Stunning work man! Hey quick question... that clear tubing you filled with the yellow paint, what is that and where can it be bought? Thanks in advance :)

@Scaleautoshop 2 года назад

hi, thanks! clear tube i bought at hobbyeasy i think this is MFH cleartube 0,6 or 0,8mm or you can buy similar

@lihihongan5289 3 года назад

My teen age year dream car....

@Scaleautoshop 3 года назад

yes, nice car..

@ashtonholbrook5908 3 года назад

Fantastic work! What is your source for the hose fittings? I have been looking for that type of stuff for a while now.

@Scaleautoshop 3 года назад

thanks! i made them in CAD and printed with 3D printer anycubic photon.

@ashtonholbrook5908 3 года назад

@@Scaleautoshop I have a 3d printer as well. Been looking for an stl.

@leon58lc Год назад

Hello, firstable my best compliments for your amazing job. Please, Can you tell tell me the size of hose joints and braided lines you used for gearbox oil? I saw you scratch build an exagonal tube tube for ignition, what size is and were I can found it? I hope I haven't disturb you with my questions. Compliments again

@Scaleautoshop Год назад

Thanks mate! as i can remember, for gearbox i used 0,6-0,8mm braided pipes. Hexagonal pipe is scratchbuild from 2mm tamiya's round beam. if you need i can send you some 3d parts to print them. you can write to my email.

@sebas-tien811 3 года назад

Hi good work ! I have a question the parts of the oil cooling system on the left side and under the radiator you made them or you took them from another kit? thank you for your answer see you soon

@Scaleautoshop 3 года назад

Hi, thanks! Some parts are from detail up set for this kit, some parts 3d printed. Tubes etc are MFH clear tubes.