1/4 SCALE V8 Engine Gets TUBULAR Exhaust System!

Подписаться 1,9 млн

Просмотров 466 тыс.

50% 1

Get the engine here➜ bit.ly/3YpMnfB
Exhaust System➜ tinyurl.com/3u...
Other V8 engines ➜ bit.ly/3ErAduy
Stirlingkit Flash Deals ➜ bit.ly/3IafXig
---------------------------------------------------------------
ENJOMOR GS-V8 Engine Specifications:
Displacement: 78cc
Four-stroke
Bore: 22.9mm
Stroke: 20.00mm
DOHC
Maximum RPM: 9000rpm
Maximum Power: 3.8kw
Water cooled
Independent Lubrication (Oil Pump)
Electric Starter (Brushless Motor)
Electronic Ignition with Distributor
Spark Plug Type: ME8 with 1/4-32 Thread
Ignition Voltage: 10-12V
Starting Power: 24-48V Battery (I used 4s battery 14.8V)
Fuel: 95# Gasoline
Oil: 20W and above, Oil Volume: 50ml
Dimensions: 13.6 x 17.9 x 13.8cm
Weight: 4500g
-----------------------------------------------------------------------------------
►Subscribe! bit.ly/2m1d1y7
►Instagram: johnnyq_90
►Support my videos!: / johnnyq90

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 581

@o0julek0o Год назад

Now it sounds like a full sized engine, I swear.

@lawnmowerdude Год назад

You can get the sound of a full size engine by carefully timed popping sounds too.

@dyllanneedham2087 Год назад

Imagine how it would sound with individual throttle bodies

@isminivermekistemeyenmahmut Год назад

You can get a full sized engine sound by placing pet water bottle inbetween bike fender and tire

@rokas8594 Год назад

lucky not a fully seized engine

@Arfadm0004 Год назад

@@dyllanneedham2087 Imagine how it would sound with superchargers

@gvii Год назад

Boy, that thing has been a real pain to get up and running properly. But holy heck, does it sound fantastic now that you have it running right! I could just sit and listen to that thing run and be perfectly happy, lol.... Good to hear that the motor didn't get cooked when the water and oil pump wasn't running. Can't wait to see what you end up doing with it once you get all the bugs worked out.

@squeezle100 Год назад

Now we need a video of a gearbox being made for that v8

@dave161141 Год назад

Sounds like home-brew torque converter :D

@fry.master Год назад

Bolt it to a geo metro transmission

@brodrea7664 Год назад

@@fry.master lmao

@Christopher26021994 Год назад

I thought the same haha!

@Gkitchens1 Год назад

Belt drive pulls on the back with a 90 into a clutch and a cvt to the rear axle you got yourself a one of a kind go kart engine that lrobsvly breaks down a lot lol

@fightuntil996 Год назад

The sound with the new muffler/exhaust is amazing.

@RANnewlife Год назад

That growl from such a small engine. Soo satisfying

@Matt_Deluca Год назад

Although I think it's neat that such an engine is available, there seems to be a lot of engineering fails with it out of the box. Perfect content for you! But I'd be upset if I bought one of these and had this many problems. Sounds great with the new headers though! Nice job

@jackradzelovage6961 Год назад

its chinese made. they dont care if it works :/

@heckin_dinosaw Год назад

I believe the reason for slot of these fails is that these kits are usually sold to be a display piece, that can be capable of running, not as an actual motor designed to run, this why so much stuff usually has to be redesigned for it to run reliably, but I agree, for the price of it they should be designed much better

@2Skinny Год назад

Especially since you can build an LS from junkyard parts for how much this thing costs.

@paradiselost9946 Год назад

if i bought a conley precision, and had these problems from the box... id track them down atnd throw it at them. but for about 1/4 the price, one can expect dodgy crap from china.

@heckin_dinosaw Год назад

@@paradiselost9946 what ever happened to Conley? I know they had a building fire but did they ever recover from that?

@tylerpoore97 Год назад

Bro. You are killing it. Been following you for YEARS because of literally no one else putting in the effort(actually having the tools to do so as well) to make these crappy toy engines/models actually run. Massive props and congrats on the subscriber boost lately!

@bluespidergaming7719 Год назад

im trying to give me some credit engineering is hard

@tiporari Год назад

Exhaust length and presence of crossover such as H or X pipe have a big effect on sound. It would be an amazing thing to experiment with tuning the exhaust to get different tones from the engine.

@MiGujack3 Год назад

8 to 1

@matthewmondragon2074 Год назад

Could be, however the important part is trhowing away the gases to the the cylinders more cleaner, if we focused much into the sound some of the gas could be still stuck and mess the combustion, thats why most of perfomance/racing exaust pipes have bigger diameter, and the sound? Well is secondary. Could be great if its try replic or make similar to the Ford GT40's exaust type, to start it simple.

@exoticcreature3059 11 месяцев назад

I don't doubt that sir but the H and X pipe less effect on sound that's you think due to the fact that the header primary length is fixed in the and so is the engines firing interval. Those two factors didctate sound the most. H and X pipes are mostly for scavenging and balancing pressure differential of the exhaust between both cylinder banks. Messing with the header primary lengths, such as using unequal length headers, will have more impact on sound because you change the timing at which the exhaust pulses from the cylinders meet each other, and whether they collide or not. 180 degree headers would be a prime example of this.

@OldCurmudgeon3DP Год назад

Trick dad used to tune the collector length (1/4mi drag race) ... Make a crayon mark down the pipe, go make a pass down the lane, cut the pipe off where the crayon burned off.

@NOTTApro142 Год назад

I bet with the better flowing exhausts it’ll run much better. But if you make multiple of different header diameters you can adjust how much torque, or how much power you want. That’s what they do in Indycar, and almost everything!

@captainslow2883 Год назад

A rev limiter would be pretty cool to see on a small engine like this

@Calebt1981 Год назад

A V8 sounds great no matter the size. This is amazing!

@0rphros Год назад

Gotta upgrade from the double boggalator and get a 4 barrel for that beast

@CreakingJordans Год назад

The return of the machining ASMR king...

@MaNNeRz91 Год назад

Please make a miniature supercharger for this 😍😍

@paradiselost9946 Год назад

what, yet another centrifugal charger that cant possibly work?

@51OWI Год назад

Agree, would look sick with a blower on top 👌

@MaNNeRz91 Год назад

@@paradiselost9946 it could work. At least for charger noise. He's getting more and more precise with his machining and designing. He could make it happen.

@markspain2219 Год назад

That thing rips, could listen to that revving all day!!

@markspain2219 Год назад

Thats awesome!!! What should I do?

@BigMountainCustomRC Год назад

The fact that the "chainsaw" sound is gone makes it so much better. The headers definitely made it sound better. But the proof is in a possible "dyno" pull.

@wesleybarton8854 Год назад

Well alrighty then. I think I'm in love. That sounds fantastic! Love the headers and muffler combo. Looks fantastic and sounds even better. Would like to see you put it on your dyno set up and see how it preforms under a load. I am glad it is ok after the oil pump and water pump quit. Looking forward to seeing what you have planned next for this engine.

@Outlawlife1010 Год назад

Sounds like 2 and 6 are running lean. Thats the studder at about 2300rpm and the boggy 2 step after throttle release over 2300. Have a built lt1 that did the same thing. Lil port and polish and new rings fixed her up though. Bad little motor though. Sounds tuff!

@rico8089 Месяц назад

That exhaust makes all the difference. Sounded best with the headers and cans 👍🏼

@quinnobi42 Год назад

That thing sounds sick! It surprised me how much the mufflers did, I kind of expected that they wouldn't make much difference.

@TranceFur Год назад

Love the sound of the new exhaust. Before, it sounded like a hot rod someone built in their shed. Now it sounds like a well-engineered machine.

@Anvarynn Год назад

A couple things I love It's quarter scale but sounds full sized That muffler actually added throat to the note

@HootiusMaximus Год назад

Wonder how much difference individual throttle bodies would make

@cristopherdelgado3904 Год назад

That's why i love headers! 😍 They transform any engine sound into a musical beast! 🤙

@MrMoparbob498 Год назад

That's really cool man - headers made big improvement & sounded excellent

@rjung_ch Год назад

👍💪✌ Glad it didn't get damaged. Can't wait to hear it reach the 9000rpm.

@grzegorzdobrosielski6201 Год назад

this is the best sounding rc car motor i ever heard

@0120raptor Год назад

Johnny You advance the timing by moving the rotor arm relative to the inlet cam. I had to do this but it means drilling and tapping a new hole in the rotor arm and grinding a new flat on the cam.I`m setting mine to 25* BTDC. As it comes from Enjomor mine was 5* ATDC which is no use at all.Also changing the hole size in the carb feed won`t do anything. The carbs will never flow enough fuel to warrant equal size holes. Lastly the cam timing and valve clearances need carefully correcting. Both are wrong on mine.

@camyota Год назад

The first time ive heard one of these things actually run and sound right!

@cjcantrell80 7 месяцев назад

If you made a sprint car to scale with the engine, that would not only be a great choice, but a badass R/C car!

@lawofliberty3517 Год назад

Do 8 into 1 collector. That would sound insane.

@BikerDaddy22RideorDie Год назад

This is the exact thing I dreamt of when I was a kid I wanted one of these on all my trucks and cars!!

@Music7Ada Год назад

Such a nostalgic sound! Sounds just like the Monster Jams I would go to as a kid

@komentierer Год назад

Am I the only one who'd really love to see a 50cc street scooter be powered by this thing? :P

@DaLoveDonkey69420 Год назад

After binging the series, been waiting for this notification!

@thaphreak Год назад

You zoomed on that belt and heart dropped, "oh fuck" lol. Glad it's fine!

@ericschumacher5189 Год назад

you should machine a box style spacer below the carburetors to increase plenum volume / allow a straighter/more-balanced path for air/fuel from the carburetors to the inlet ports.....too adding an X-pipe after the mufflers will increase signal strength to the carburetors by increasing exhaust scavenging (making for better throttle response.

@prothomasgaming Год назад

Nice, you should make a video in which you explain all machines and tools you use.

@SmokingMan26 Год назад

Saw the short of this engine and was waiting for this. sounds so damn good.

@SmokingMan26 Год назад

No thanks account made Yesterday to scam people

@cleemungo Год назад

Asmr for car guys lol. No voice, just engine sounds.

@LordPrecision Год назад

Looks perfectly to fit in a smart car)))) The V8 smart will 100% gain millions of views

@asterix3674 Год назад

Imagine if you make a 8 to 1 exhaust, that would sound magnificent!

@aserta Год назад

FYI there's a switch that you can mount on the test board that decouples both wires of the battery so you don't have to fumble with disconnecting it. You can find it in the usual places, like fleabay.

@Freesavh1776 Год назад

It definitely sounds like an American Muscle V-8. It makes beautiful music 🎶

@jordanwilliams2557 Год назад

I’ve seen people build scale rc cars from scratch with fiberglass and aluminum, I’ve always wanted to see one of these engines in those scale replicas, you should see if you find one and THROW THAT ENGINE IN IT

@jordanwilliams2557 Год назад

@JonnyQ90. Pay me first

@VisableYT Год назад

I love how it sounds when it cranks

@GulliJ Год назад

Sound way better after improvement, in my thoughts it need a bit modded exhaust over the new headers. Xpipe and light silencer to not mute it too much but balance a bit the sound and it also appears the rev is way better with new headers so... HP must be better too

@kandd2591 Год назад

This channel is what got me into machining and making parts, I am still not very good at it and it was expensive to start out but it it really fun and I am glad I found this channel. Thank you

@Keratsas Год назад

This has to be the best mini V8 in the world and its awesome that you share it with us. What CNC machine do you use?

@turbinegraphics16 Год назад

I'm glad you didn't damage the engine, there should be some kind of alert.

@lukasboyer3099 Год назад

that new exhaust system sounds insane it sounds like you are hearing the engine from inside a car that’s really cool

@Gavs_rc_hobbies Год назад

Runs so much smoother after those small changes.

@myforeverwoman-mieternamuj1252 Год назад

Put that bad boy in an RC car, construct if from scratch if you have to. Make a series out of it.

@BrainyThyme3869 6 месяцев назад

That thing sounds like a 350 SBC, impressive!

@alexanderberte2650 Год назад

Ok that little motor has no business sounding so good!

@skylarhawkins2284 Год назад

I wish the collector was larger. You should rework the end of that, less restrictive and would likely sound even better

@cerberes Год назад

Do one of those crazy 8 into 1 headers. There is a bit of science that needs to be looked at for the collector. It makes a V8 sound insane.

@GulliJ Год назад

No doubt these engines are made too quickly from china, and you improve them way way more than any possible on a real made engine That's very cool and a great satisfaction for you and us to see.

@johannesletsoalo1711 Год назад

The sound of the new exhaust system is 👌👌👌 Sounds like a mini old Mustang GT engine

@BryTheGTIGuy Год назад

you should do an x pipe and boom tube exhaust. that would sound so cool

@frankierzucekjr 11 месяцев назад

It sounds like a monster truck motor now. I hope you build one of those with these beast lol

@sidneysanders5726 Год назад

I wanna see that V8 in a RC car build, much like the V4 AWD build with the brakes and all.

@MasterBolitz Год назад

Sounded great the first second after start, you should try lowering the idle rpm for better sound

@charade993 Год назад

I wonder if the firing order caused the distributor to cross-fire and arc across the hall sensor? Either way. Its fixed now

@benkappaa Год назад

Put a supercharcher transmission and place it into a scooter damn im excited

@kpdubbs7117 Год назад

5:27 That sound is just perfect!

@MilesPrower69420 Год назад

a few bends after the collectors and maybe a 3d printed flowmaster exhaust and i bet it would sound heavenly! bends in the exhaust reduce raspyness and give it a much cleaner tone

@microbuilder Год назад

The most adorable little growl, sounds awesome lol

@TestECull Год назад

It needs a distributor with mechanical and vacuum advance. You have the skills and tools to do it. Let's see a proper dizzy on that thing!

@A2J_Tim Год назад

you can make it sound like a mini exotic if you build 180 degree headers. just look it up, V8's sounding like high reving in line engines.

@user-ng2rx4qc8o Год назад

machine the distributor base out of aluminum with large heat fins coming off it and use that heat paste stuff on the hall sensor...or maybe a liquid cooled base with coolant flowing through, also a roller or needle bearing in it wouldnt be a bad idea either

@bensonCP Год назад

So cool man. My vote is for the new headers minus mufflers! Sounds like a drag car

@nigelbarradell2265 Год назад

SOUNDS GREAT WITH THE NEW PIPES

@tamuct01 Год назад

Spinning magnets inside of a metal housing, even if it's non-ferrous, will create eddy currents generating heat. The plastic housing should work much better.

@RamPal-gd1xq Год назад

Bro this is insane

@CathodeRayNipplez Год назад

A quality Chinese product. Very good. Number one.

@NeverlostatBSgaming Год назад

Soon you’ll have made a full 1/8 scale car and I can’t wait to see it

@HeadBassVTEC Год назад

wow those are some nice 4-1 headers, really transformed the sound those things are not cheap though ;o]

@MVSTNGGT Год назад

Needs an experimental H and X pipe, would sound even better and would probably do that small engine some good.

@Mediarahan003 Год назад

If you couldn't see this, you'd never guess how small it is by the sound.

@domgutta6389 Год назад

I really want to put this into my Rc boat

@adamrosenhamer3762 Год назад

Bro I might be too far into this but an x pipe would sound soooo good on this

@thethrottlecracker Год назад

The carbs will need to be bigger for any high RPM. I don't know what you plan on using it for tho, so might not matter

@shushyshushy6762 Год назад

I really want to see these little V8's in a small scale car like an old American Muscle Car.

@mikehorb9485 Год назад

Bro went from the truck log manifolds to the corvette equal length long tubes. And it sounds identical, but almost as though its 1/4 scale.

@bitesizegamer301 Год назад

Equal lengthen exhaust improves exhaust flow and pulse.

@Brickedaboss07 Год назад

Man it sounds just like the v8 in the old Chevy truck I bought for coincidentally familiar prices

@harshdhiman9720 Год назад

Cant wait for the super charger ❤❤

@joehirst2122 Год назад

This would be awesome in a big RC boat

@WaveMotionMachines Год назад

This would be cool in a 1/4 scale RC monster truck

@yourbigfan1777 Год назад

I kinda like how this engine sounds on low rpm with stock exhaust, reminds me of very old Ford cars. The new tubular exhaust sounds like a Mustang exhaust

@seanmiller1275 Год назад

You deserve a whole lot more renown for your work.

@doconyoutube2365 Год назад

Wow wow wow It's honour to watch your videos free of cost What a machine you made and what a sound Hats off to you 💯✅🥂

@rickkubbenga5904 Год назад

Amazing sound!!! Insane

@ipadize Год назад

maybe it had to do with eddy current being induced from the magnets spinning infront of the aluminium and also interfering with the hall sensor?

@dirtydishwolf1633 Год назад

Put a cyntrvical clutch from a ten horse power go-cart then mount that part on a orange county choppers bicycle and raise some hell put it together someone!

@MrRickChase Год назад

Next up electronic cutoffs for the 1/4 scale exhaust 😅. Really love seeing all this stuff come together

@reddeath5delta Год назад

Now it's making the happy noises!

@routtookc8064 Год назад

the Delrin piece for the distributer, you are able to rotate it on its mounting point to adjust timing? if not, looks like you could remake the Delrin piece with a slot for the distributer cap to secure too and adjust timing by turning the cap.