Thank you! You are the McGiver of Ink Refillers! You may not recognize the reference. McGiver was a very resourceful guy who could make anything work using only the items around him at the time.
I followed his clear instructions and refilled my very old, empty, color ink cartridge. Soaked it in a small amount of very warm water first, filled the ink, covered the holes, used my vacuum hose, and it worked perfectly. Thank you!
Thanks Kevin! Very easy to understand and I was able to clean both cartridges and get the ink flowing after a long time being unused. With a little bit of patience, it worked just as you explained. The vacuum technique is fantastic!
Depending on your printer, if your printer is not reading the cartridge or says it's corrupted but you just refilled it you can do this but at your own risk: When refilling the cartridge take off the top paper completely, you'll see a circular indentation to the right of the refill hole. After refilling use a tip of pen cap or something strong and press that circular depression 10 to 15 seconds, but do not puncture it... That resets the cartridge and usually you can use again with great success...
Great Video how to do it right and all other Important Information. After Refilling, the Printers will no longer read the new ink Levels.. You don't need it either. But if you want to try it. HP Printers can only store ever Cartridges (4 I mean). Reset should go if you put in one after the other. The 5th must be the refilled one, which is then shown as a new one with a suitable stand. Since I was missing the cartridges and I don't care about the display, I couldn't test it.
Thank you so much! I bought the refills and the ink would NOT come out. After using your vacuum method one is working great. The other I over filled so I'm trying the soaking method to see if the excess will drain. Seems to be working at the moment, cup is pretty black lol.
Because of you I am going to try this. I had so many say it is too hard to mess with. U do make it look easy. But I am going to try. I got my order in today and did get it through BCH as u mentioned. And got the cleaner as well. Thanks for your help. Hope I have just as good luck with it.
Thank you. Because you spent the time to make this video, I ordered your products via Amazon. Got the kit and the combo with the 3 blacks with the 3 colors. Great prices, informative video, nice guy, thank you!
Several hp inkjets remember the last 3 or more cartridges and keep complaining that the cartridge is empty by its estimation process. Keep 4 or more cartridges around and install 3 or more old ones till you add the "NEW" one. it will see the last couple and think it hasnt seen the "NEW" one before.
Thanks Kevin. Your video was very informative and awesome. Talking about pain points and things to be aware of. I like your sassy dry comments too (e.g. toothpick for dental hygiene). :-) Where did you get your little steamer? That looks fantastic!
Absolutely, Great Video! Have a question. I have HP 62 Instant Ink Cartridges and planning to cancel my subscription. How can I bypass the Instant Ink cartridge reader/scanner so it will work like a standard HP 62 Ink Cartridge?
This video title suggests that the EZ30-T will work for a 67 cartridge but the website only lists the 60 61 62 63 64 65 as the cartridges it can service. Will the EZ30-T work with a 67xl cartridge? If not, what's the kit for a 67xl?
I would really love to get this kit but I looked on your site and couldn't find one for the HP 67 ink. Is there a kit for that? Or would this work for that as well?
Can we refill the cartridges which came with printer. When I asked to refill centers they told me that cartridges which came with printer will only fill 20% and they asked me to buy new one and next time onwards we can use for refill which will have full capacity. Thanks
@@BCHTechnologies so is this the right kit to make them refillable? www.bchtechnologies.com/modification-kit-for-making-spongeless-cartridge-with-hp-integrated-cartridges-60-61-62-63-64-65-66-67-68-69-70-as-rfc-hpsq.html
hey one question can I try ciss tank for my Canon mg 2500 series. can u make a practical elaboration on it Pls.. I have frustrated refilling and buying too costly
Kevin 求助。我自己refill 了HP ENVY 4501 黑色的墨合二次，第三次refill 开机后，打印不了了，频幕显示”The following ink cartridge(s) must be replaced ",然后屏幕下面一直显示运行搜索的小符号死在那里了。请问我该怎么办？电脑里打印软件里说是黑色墨合失败。非常感谢你的频道。墨合 太贵了，实在买不起了。
WARNING ! I filled up my 61 up cartridge till ink came out of holes like in this video and it was a mess. I was wiping up ink and it would not stop and then I used the syringe and needle and sucked out the excess ink. I have not tried to print yet.Making sure ink stopped leaking.
@@BCHTechnologies The guy in the video shows him filling till ink comes out of the holes. I thought it would be ok to fill it. This was my first time refilling an ink cartridge.
Hello Kevin.. I need help.. I saw your video on how to refill them, and I thought it was pretty easy so I bought the ink you recommended and when I tried to put it back inside of my Hp Envy Photo 7858 it reads it as counterfeit or used and doesn’t print out any color...I don’t wanna spend so much money every time buying new ink.. what should I do ?
Hi there! I have a question, maybe a stupid one. Is it technically possible to refill a cartridge, like a hp 305 for instance, directly from the printer, without taking it off? Or its risky because of the pressure with the siringe that might cause a leaking from the print head? Maybe it would be hard only to take off the plastic cover for the siringe.. apart from that I think it would be possible. Thanx!
Very helpful thank you! My cyan ran out today and I immediately refilled all 3 colors but my printer will still not print cyan (magenta and yellow come out perfect on the test page). Is it because I need to vacuum it (I don't have the clip)?
I purchased the kit from ebay recently to refill my HP 64 color and black cartridges. While refilling the black cartridge had perfect results, refilling the color cartridge didn't go as well. While the cyan and magenta prints okay, I cannot get the yellow to print at all, regardless of what methods and tricks I tried. I tried them all. If I set the cartridge on a moistened paper towel, the yellow comes out just fine. But it just won't print. At first, the magenta didn't want to print at all, either. It was intermittent. But I'm not surprised. Since the days of Lexmark printers, I've never had luck refilling color cartridges, only the black cartridges. My last three printers would not print yellow after refilling. It only seems to be the yellow. What gives?
It doesn’t sounds like clogging. It’s more like ink pressure imbalance. Use the priming clip to draw more ink out and thus remove extra pressure. Leave the cartridge in the printer for a day, then print 5 to 10 pages. Don’t print full color page, just regular documents with color figures. It usually takes care of the problem.
I refilled hp 123 Tri Color cartridge in hp deskjet 2620 but the ink level indicates that it is empty and the printer does not print anything , when i give it a printing job , it blocks it. I searched on internet and i discoverd that hp blocked refilling old cartridge ,so i need a way to reset ink level or make the printer read the old one as a new one. could you please help me ?
Here's how you can try resetting the ink levels on an HP printer: Remove and reinstall cartridges Take out both cartridges, turn the printer off and on again 20 seconds later, and repeat at least five times. Then, put the cartridges back in and print a test page. Reset the printer For inkjet printers only, remove the cartridges, unplug the printer while it's on, wait a minute, plug it back in, and turn it on. Then, reinstall the cartridges
Let me know please if that worked for you I remember I had the same problem before with lots of different printers as I never bought the real kind of ink like they want you to, but I always figured it out so let me know if that worked or not.
Here's another one you can also try that's always worked for me in case those don't.. How to Resolving Cartridge Recognition Errors When faced with cartridge errors, one of the simplest yet effective methods is to remove and reinsert the ink cartridge. This process can reset the printer's internal memory and resolve recognition issues. Follow these steps: Power off the printer and unplug it from the wall outlet. Open the cartridge access door and carefully remove all ink cartridges. Press and hold the power button for about 30 seconds to perform a hard reset. Reinstall the ink cartridges, ensuring they are securely and correctly placed. Plug the printer back in and turn it on.
An Amazon customer informed me that bulk ink refill kits do not work on the HP Officejet 6310-All-in-One printer. Does the BCH Technologies refill kits work with my particular HP printer?
HP makes their money on the ink cartridges. The cost of the color 67 cartridge is now $20. You will end up paying more for ink than the printer itself. AND HP has applied a chip on the cartridges so they are non-refillable. I've tried refilling them and it didn't work for me. They say you need to reset the chip. .?
Hi Kevin, i have tried it with my printer envy 7155 but it does not work out. The ink is still low and it does not allow me to print at all. What should i do now?
It is here: www.bchtechnologies.com/ink-refill-kit/refill-kit-for-hp/first-timer-ink-refill-kit-by-bch-for-hp-inkjet-printer-cartridges-60-61-62-63-64-65-everything-included-for-an-easy-refill-4-color-black-kcmy-priming-clip-tool.html
Hi Kevin! I'm planning to refill my HP 64 cartridge is there anyway i can know if the cartridge is already refill? Do i really need to do it 7 times? My ink was not dry i just need to refill them mainly the tricolor one though. Thank you!
My ink cartrige leaks after trying this. and I am getting huge ink blobs. do I need to make sure this is Air tight, I could not understand and forgive me, but did you say, It does need to be air tight or it does not? Thank you
Kevin, I refilled but it's not working... it is coming out of the bottom but when I put in printer it works on one sheet of paper and then no ink. Could it be I put too much in? How can I fix? Thank you...
@@Lisas_Chatroom after refilling any cartridges , it's recommended to let it sit in the printer for a period of at minimum of 1.5 hours , however this video is completely wrong ! Look up your original cartridge refill procedure ! You don't have to drill holes in any cartridges and sometimes it's better to check with your local Drugstore and get it refilled for less than 3 dollars ! This video needs to be removed ! Never use a vacuum cleaner on a ink cartridge !!! Please ignore this guy
HELP! I have refilled mine twice within the space of 2 weeks to overflowing. I have cleaned and blotted the excess from the top and bottom of the cartridges, but it's not printing the correct colours and I've even had to re-fill my black after printing 30 pages and it's now not working at all!
Ok, so even though you used the 60 cartridge I can use the same exact method with the 63? I have a hp officejet 3830. When I print I still get a little black but no colors. I'm fairly certain there aren't any blockages so once refilled it should print fine correct? Thank you.
hi I have problem with damn 21-22 cartridges ---is there any bypass on chip or board of F2180 for bad cartridges error?? printer works with new cartridges but after 150 pages cartridge led blinks always....................so PLZ a bypass for badcartrige error
I have one of those sitting in a corner because it prints streaks of ink at the bottom of my prints and claims to be low ink when I just filled the damn thing. Expensive junk!
Pls help me, i refill hp 63 before its working but now not working anymore it keeps blinking.. the estimated ink shown empty.. please help me what to do? Tia
I refilled my HP 62 Black Cartridge for HP Envy 5660. HP Envy wont allow to reset ink level. HP Envy 5660 is a touch screen printer. Dont know if there anyway to reset ink level. anyone has idea how to reset ink level for Envy 5660?
The sound is fine. Maybe it's your equipment. If you are refering to when he is opening the package of ink, there is no audio 2:58-3:15. Have a good day ;)
