No video :(

#11 LM35 and 4-20mA Industrial Temperature Sensor to Outseal Arduino PLC

Подписаться 6 тыс.

Просмотров 6 тыс.

50% 1

The Outseal Arduino PLC is programmed and scaled to reading the analog values of a potentiometer, LM35 temperature sensor and a 4-20mA temperature transmitter through a 4-20mA current to voltage converter module. the value of the potentiometer operates for relay outputs of the PLC. The converter module zero and span calibration was carried out before being connected to a temperature controller circuit.
Intro 0:00
Potentiometer Circuit Connection 0:19
Analog input 0:40
LM35 Temperature sensor 3:30
Calibrating the Current to Voltage Converter 4:45
4-20 mA Temperature Sensor Circuit 5:41
Temperature Controller Logic 6:28
Conclusion 7:43
Outseal Studio Download
outseal.com/si...
Link to previous videos:
#1 How to Program Outseal Arduino PLC - Getting Started
• #1 How to Program Outs...
#2 How to Program Outseal Arduino PLC - Studio Overview
• #2 How to Program Outs...
#3 How to Program Outseal Arduino PLC - Contacts & Relays
• #3 How to Program Outs...
#4 How to Program Outseal Arduino PLC - Latch & Flip
• #4 How to Program Outs...
#5 How to Program Outseal Arduino PLC - Water Pump Control
• #5 How to Program Outs...
#6 How to Program Outseal Arduino PLC - Delay -Timers
• #6 How to Program Outs...
#7 How to Program Outseal Arduino PLC - ROTON & SPWM
• #7 ROTON & SPWM | How ...
#8 How to Program Outseal Arduino PLC - Counters
• #8 Counters | How to P...
#9 How to Program Outseal Arduino PLC - Pump Control Sequence
• #9 Pump Control Seque...
#10 How to Program Outseal Arduino PLC - Comparison
• #10 Comparison | How t...
Link to next videos:
#12 VTScada Modbus Digital Read/Write | Outseal Arduino PLC
• #12 VTScada (Free Lice...
Buy the required hardware for this video from Aliexpress with these links to support this channel.
1. Arduino Nano V3.0
s.click.aliexp...
2. Terminal Adapter Board For Arduino Nano
s.click.aliexp...
3. 24V DC Multiple Channel Optocoupler Relay Module
s.click.aliexp...
4. 16mm 24V Panel Mount LED Indicator Lamp
s.click.aliexp...
5. Jumper Wire
s.click.aliexp...
6. Power Supply
s.click.aliexp...
7. 4-20mA Current To Voltage Module
s.click.aliexp...
8. 10 kiloOhms Potentiometer
s.click.aliexp...
9. LM35 Temperature Sensor
s.click.aliexp...
10. 0-100 Degree Celsius PT100 4-20mA Temperature sensor
s.click.aliexp...
11. LCD Digital Multimeter
s.click.aliexp...
12. 4-20mA Current Signal Source
s.click.aliexp...

Опубликовано:

15 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 45

@temyraverdana6421 2 года назад

Thanks, a great useful lesson. I like this videos series

@OnosTech 2 года назад

You're welcome! 😊😊😊

@roelgritter 2 года назад

As always great tutorial

@OnosTech 2 года назад

Thanks

@antoniofranciscodacosta9608 2 года назад

Ótima aplicação para a automação industrial com baixo custo, parabéns por compartilhar seu conhecimento

@OnosTech 2 года назад

Thanks a lot

@mdmostafashahid948 2 года назад

many many thanks for your best...❤️❤️❤️

@OnosTech 2 года назад

You are most welcome

@sametsahin5494 2 года назад

Super work 👍👍👍

@OnosTech 2 года назад

Thanks

@glauberpaulino1260 2 года назад

uow!!!!! it´s most amazing your video, thank so much. congratulations!!! [ ]´s

@OnosTech 2 года назад

Thank you too!

@karte2626 2 года назад

Great!!!

@OnosTech 2 года назад

Thanka

@essamemad9273 2 года назад

you are more thane great

@OnosTech 2 года назад

Thanks

@rdchannel3307 2 года назад

great sir..👍

@OnosTech 2 года назад

Thanks and welcome

@mdmostafashahid948 2 года назад

I hobe you make same topics video

@rdchannel3307 2 года назад

@@mdmostafashahid948 insya allah sir 😊

@ailtonfacanha1737 Год назад

Hello Have you had success with the Online mode at Outseal? On some Arduino Nano it doesn't work properly. Do you know how to solve this problem?

@OnosTech Год назад

Hi, Yes I have! Have you uploaded the Outseal nano bootloader? Here is the link on how to: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-caiiO4d6lR4.html

@essamemad9273 2 года назад

How to Program PLC for the Bottle Filler Machine

@OnosTech 2 года назад

😊

@ragulr7168 Год назад

Brother is have one problem I am using two analog port at time and different analog input A2 pin measure 0 to 5v But A1 pin only measure 0 to 2v

@OnosTech Год назад

Please explain the problem in details

@markrgreenlane 2 года назад

Is there anyway Outseal can have more than 2 analogue inputs, can it have say 8 or 10??

@OnosTech 2 года назад

You can use Extended Module ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GEeiTLoXdKY.html or ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-w0vQqteCe1Q.html s.click.aliexpress.com/e/_DdIy9P1

@novalardiansyah1727 2 года назад

sir, can you make a tutorial on how to access PZEM 004t to the Arduino Outseal PLC ?

@OnosTech 2 года назад

I can, but I don't have this module.

@gralves Год назад

Legal seu vídeo. Me diz, qual versão do Outseal eu consigo descarregar o programa no arduino nano. Estou tendo problemas na transferência do programa em todas as versões do Outseal para o Arduino nano, e ainda não consegui descobrir o problema. Se puder me ajudar, agradeço.

@OnosTech Год назад

Thanks. This video should help you. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-caiiO4d6lR4.html

@gralves Год назад

@@OnosTech Thank you very much. I'll see later.

@lenslens7379 2 года назад

I discovered outseal thanks to you Can outseal read I2C sensors??

@OnosTech 2 года назад

👍👍👍 Outseal PLC can read I2C sensors. The next few tutorials are around I2C

@lenslens7379 2 года назад

@@OnosTech woow! Thanks

@OnosTech 2 года назад

You are welcome

@OnosTech 2 года назад

Make sure to subscribe and enable notification so you don't miss it

@lenslens7379 2 года назад

Always done ✅

@barrew4369 4 месяца назад

bro i wanna know the reason why you devided max output voltage with 5 and than you multiply with 1023, how come?

@OnosTech 4 месяца назад

www.electronicwings.com/arduino/adc-in-arduino

@barrew4369 4 месяца назад

@@OnosTechNice bro, very helpfull, Thank you

@barrew4369 4 месяца назад

@@OnosTech anyways bro, now i worked with DHT11 sensor and i wanna try to read it with outseal studio. the input is digital so its different with this tutorial. can you help me?