No video :(

12-Volt Conversion Wiring Details ― Tracing the Wires

Подписаться 14 тыс.

Просмотров 18 тыс.

50% 1

This video shows a 12-volt conversion's wiring in great detail! I actually trace the wires to show where they go, and show them on a diagram as well, so if you are planning on converting your tired old 6-volt tractor to a fresh 12-volt system, watch this video! The 12-volt conversion kit is linked below, as well as the Pertronix Coil and Pertronix Electronic Ignition that were used in this conversion - those parts are highly recommended as well as they result in a far more reliable ignition system.
This job took a heck of a long time - mainly because I found things wrong with something else at every turn - but it now starts every time and runs like a clock! You may want to check out the other videos on the playlist (linked below) for an overview of the entire job. Getting the alternator installed is pretty involved!
I believe that all of the parts (and parts for other things as well) are linked below. If I have left anything out or if you have any questions, feel free to ask in the comment section. Good luck!
🍺 If you enjoyed the video, consider buying me a beer!: www.paypal.com/cgi-bin/webscr...
Here is the playlist for the Ferguson TO-20 tractor:
• TO-20 Brief
Ferguson Stuff
Pertronix 1244A 40511 Ignitor and Flame-Thrower Kit -- amzn.to/3q0J39e
Ferguson Complete Carb Repair Kit Marvel Schebler -- amzn.to/3npTzFg
12-Volt Conversion Kit (Not the same - looks better)- amzn.to/3nr2KoI
1-3/8 PTO Conversion Shaft Assembly -- amzn.to/2XnLPsB
ARES 13000 - Professional Ratcheting Crimper Tool -- amzn.to/3pZx77x
Berryman Chem-Dip Parts Cleaner - amzn.to/3bid5AO
Economy I.V. Pole - amzn.to/3deQHZl
Auxiliary Fuel Tank - amzn.to/3xZnidY
Evaporust -- amzn.to/2TexcZN
Leveling Box - amzn.to/36DfbrR (the black lifting arm that I put on)
Zerk Assortment - amzn.to/3rcLYNI
Ferguson Complete Carb Repair Kit Marvel Schebler -- amzn.to/3npTzFg
Here are some more Ferguson TO-20 videos you may enjoy:
Ferguson TO-20 Oil and Filter Change -- • Ferguson TO-20 Oil and...
Mapping the Ferguson TO-20 Wiring -- • Mapping the Ferguson T...
Ferguson TO-20 Oil Change -- Success! -- maybe... -- • Ferguson TO-20 Oil Cha...
Ferguson TO-20 12-Volt Wiring [One] -- • Ferguson TO-20 12-Volt...
Ferguson TO-20 12-Volt Conversion - Poor Design -- • Ferguson TO-20 12-Volt...
Ferguson Oil Change Take Three - Part 2 -- • Ferguson Oil Change Ta...
Fixing a Leaky Water Pump on a Ferguson TO-20 -- Part 1 -- • Fixing a Leaky Water P...
Ferguson TO-20 12-Volt Wiring [Two] -- • Ferguson TO-20 12-Volt...
Please Share, Like, Comment, and Subscribe!
Buy me a beer: www.paypal.com/cgi-bin/webscr...
Click here to subscribe ― / @planetmojo
Our Oak Savanna Website ― mojoprairie.com
Thank you for watching Planet Mojo and have yourself a great day!
#12VoltConversion
#12VoltWiring
#WiringDiagram

Опубликовано:

6 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 33

@wrongturnarchery2337 3 года назад

This is kentucky hillbilly had to change my name due to my business just want to say thanks for this video its a life saver I finally got it started but it got hot using this I see where I went rong thanks brother

@dennyussery1021 3 года назад

Good morning from n/w ohio my 49 To 20 runs perfect with the 12 volt and pertronics. Have a great day mister!!!

@PlanetMojo 3 года назад

You are quite welcome wrong tern archery! I had planned to make a video like this because I had the same problem as you did. There are a lot of videos out there on the subject, but nobody shows the wiring! Thanks for giving me the kick in the butt to get it done! I figured as soon as I get it running reliably, I'll make the video, but I haven't got to it yet. Hope it works out well for you, mine is running awesome! 😊

@PlanetMojo 3 года назад

@@dennyussery1021 I agree, the Pertronics coil and electronic ignition make a world of difference!

@adenvet2830 3 года назад

Hi Mojo, great vid the old girl will be as good as new soon, can't wait to see her in action.

@PlanetMojo 3 года назад

Thanks Larry! A few more things on the 'need to do' list like a brake job - very important thing up on a ridge - and a few odds & ends on the three point hitch. I also have the lights to install, but so-far it has started every time and runs like a top!

@ccrx6700 3 года назад

Smart move going with electronic ignition. 👍 good job my friend, and i can't believe you ever cobble anything together 😊

@PlanetMojo 3 года назад

Thanks Dave, It's my first electronic ignition conversion, and I must say I would never go back to points and condenser! … or 6-volts for that matter 😊

@ccrx6700 3 года назад

@@PlanetMojo smart move on your part!

@brianmoore3659 Год назад

Thats a great video!

@PlanetMojo Год назад

Thanks Brian! 😊

@normdeclercq4052 10 месяцев назад

Thanks man well done 😊

@PlanetMojo 10 месяцев назад

You are quite welcome! 😊

@mizaelnoriega9301 2 года назад

Can you do a video of the tractor powering on with the 12volt conversion/ with the electric start? Havent seen any like that and itd be nice to see how your hard work paid off! Im working on that right now.

@PlanetMojo 2 года назад

There is a video like that. Not sure when it came out, but all of the videos in this series can be found in the Ferguson TO-20 Tractor playlist: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gdC1VKxBkWw.html I'm sure the video can be found there 😊

@PlanetMojo 2 года назад

If you cannot find the video, let me know and I'll make one. The tractor is running just fine, but I'm having an issue with the brakes and will be fixing that soon. Good luck 😊

@normdeclercq4052 11 месяцев назад

Did you remove the old voltage regulator?

@PlanetMojo 11 месяцев назад

Yes

@MitchVidrine-ht2ps Год назад

Watched several videos this is the best info so far . But I can’t get tractor to turn over it’s not getting power. Any suggestions? Would really like a email with your diagram. Took snap shot but couldn’t read . Thanks

@PlanetMojo Год назад

My diagram will not work for tractors that are not using the exact parts that I did. I cobbled together the diagram for the tractor with the conversion kit's diagram, and added in the info from the coil and electronic ignition.

@MitchVidrine-ht2ps Год назад

@@PlanetMojo I’m using same parts as your video . I just order electric ignition. Have one on it now but I think it’s a6v . Hopefully that’s what my issue is

@danhandyman4 19 дней назад

I could use a picture of your diagram you drew also please

@kevinpfaff2301 2 года назад

Hi Mojo, so the coil is 12v, but if i keep the 6 volt coil i have to use the resistor, right?

@PlanetMojo 2 года назад

It's been a while, but I believe the Pertronics coil made the difference. Not sure if it matters what the voltage is. All of those instructions were with the electronic ignition and the coil. The kit came with a resister, so it's likely you need it if not changing the coil or ignition.

@MitchVidrine-ht2ps Год назад

Is there any way you can get me a picture of your diagram? I must be missing something. I can’t it 12v to work

@PlanetMojo Год назад

I'll take a look for the diagram the next time I'm out in the machine shed.

@MitchVidrine-ht2ps Год назад

@@PlanetMojo I would greatly appreciate it . Thanks for your help

@MitchVidrine-ht2ps Год назад

@@PlanetMojo I hate to bother you but , I really could use your diagram. I installed electronic ignition,12vcoil one wire alternator, 12v battery,and I am having issues.

@danhandyman4 19 дней назад

@planetmojo I could use a picture of your diagram you drew also please

@MrBigfishcatcher33 Год назад

Mojo did your tractor use to have the push button start? None of the diagrams show the push button. Also back of my amp meter show a positive on both sides. So im assuming while looking at the back just treat left side as negative to alternator. Also thanks great video

@PlanetMojo Год назад

Ferguson tractors don't have a push button.