In this video, I will demonstrate cutting wood using both a plain end, twisted spiral blade and a traditional pin end blade which is not twisted. The advantage of using a spiral blade is that it cuts in any direction that you push the wood. This allows you to push the wood forward, backward, or side-to-side to make a cut. A traditional blade requires you to push the wood straight forward through the blade (not side-to-side) and most times, requires you to rotate the wood slightly (clockwise) to stay on the cut line.
Because a spiral blade cuts in any direction, it has been said that making accurate cuts using this blade is more difficult (the cut is harder to control) especially for a beginner. In this video, I will be testing this idea to determine for myself, "Are spiral blades harder to control than traditional blades?"
Spiral blades are plain end blades (with no pins). To use them, the blade clamps on your saw must be able to hold plain end blades. In a previous video, I showed you how I installed new blade clamps on my saw so that I could use plain end blades. Here's a link to that video: • 116. Installing pinles...
Being able to use pinless (flat or plain end) blades opens up more blade choices (there is a greater variety of pinless blades than pin end blades). The pinless blades also require a much smaller pilot hole when making inside cuts.
Thanks for taking a look at our video. There are several ways you can help support us for free!
1) Subscribe to our channel and click the notification bell. Doing this notifies you when we release new videos. You can unsubscribe and/or turn off notifications at any time.
2) Watch our videos. We prefer that you watch the entire video however, if you are running short on time or want to speed up the playback of the video, click on "settings" in the RU-vid app and change the "playback speed" to "2" (instead of "normal"). This will double the playback speed. Feel free to experiment with other values.
3) Click the "thumbs up" icon which gives the video a "like". This helps to recommend this video to other like minded people.
4) Leave a comment or ask a question. If you prefer not to leave a public comment (or question), you can email us at ImagineThenMAKE@gmail.com. We do our best to reply to all comments and questions.
5) If you know someone that might enjoy this video, please feel free to share it with them.
6) If you have a suggestion for a video, please let us know in either the comments or via email.
7) If you would like more information on any of the products you saw in the video, please click the links below. NOTE: This channel is a participant in the Amazon Associate Program. As an Amazon Associate, we earn a small commission on qualifying purchases at no additional cost to you.
For more information on the spiral blades I used, visit: amzn.to/3atMRLA
Amazon also sells many other types of scroll saw blades.
For more information about the bladeholders, visit: amzn.to/3kdzdxT .
This bladeholder design can be used with several kinds of scroll saws (not just the Central Machinery / Harbor Freight saw). Check the web link provided to see if these holders will work on your saw.
Music:
"Aces High" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0 License
creativecommons.org/licenses/b...
All video content was written, shot and edited by Matt Ancona.
22 дек 2020
