This video along with your 2 scroll saw videos are pure gold for those of us starting out with scroll work. The gold standard for scroll saw tutorials. Thanks 😎
Thanks for the kind words. If you ever have any questions along the way, please don't hesitate to ask. I'd be more than happy to help out if I can. Thanks for tuning in to the show.
Once again thanks Kenny. This is the most informative video on scroll saw blades I have watched. Right level of detail, practical explanations and clear recommendations. No one could ask for more. All I have to do now is type up my notes, print them off, laminate them and have them ready near to the saw. Brilliant!
Glad to hear that you found it useful Mike. There is always confusion when trying to choose the right blade for the job and hopefully, this show (although long) will clear up some of that confusion. Thanks for tuning in and taking the time to leave the kind words.
I'm glad that you found it useful. Please feel free to ask any questions you may have along the way and I will do my best to help where I can. Thanks for tuning in.
This video popped after I was watching a video by Tamar. I was asking you the other day about a spiral blade, and also wondered about all other blades. A week later, this video came up. Perfect timing. Thank you.
Glad to hear that you found the information useful Kara. If you have any questions along the way, please don't hesitate to ask. I would be more than happy to help if I can. Thank you for tuning in to the show.
Hi Kenny, I was watching a few other scroll saw vids when I came across this one. I really like the way you explain things I always learn something new from you , I had no idea of the importance of the different blades and cuts they make. I think you are an excellent teacher of the craft and your dedication is un matched in my opinion. Thanks for putting in your time and your desire to help and teach people.
You can have the most expensive scroll saw in the world, but if you choose the wrong blade, it won't cut anything worthwhile. After all, it's the blade that does the cutting, not the saw. Blade selection is imperative to successful scrolling. Thanks for tuning in William and for the kind words.
Thank you for a very informative video! I am new to scroll saws, and am delighted that I can get so much useful information from youtube. As the worlds (maybe) oldest apprentice, with help such as you offer, I may be a craftsman before age takes me off the planet.
I hope that you have many more years of your apprenticeship left in you Pat. Good luck on your scrolling adventure and if you ever have any questions, please feel free to ask. I'd be more than happy to help if I can. Thanks for tuning in to the show.
You're very welcome Rhonda. I'm glad that you enjoyed the video. Thanks for tuning in and for taking the time to leave the kind words. It is very much appreciated.
What a fantastic video! SO informative! the demo of spiral blade gave me a greater appreciation for the tool. I can't wait to get some new blades, dust it off and actually start using it! Thanks so much
You're very welcome and I'm glad that you found the show useful. If you have any questions along the way, please don't hesitate to ask. You can either ask here or over on my show's facebook page. Whichever you prefer. Thanks for tuning in and for taking the time to leave me a comment. It's appreciated.
Another great tutorial. I'm thinking about getting my first scroll saw and your discussion about the blades will send me in the right direction. All the best to you Kenny.
Thanks for the kind words Robert. I'm glad that the show was useful to you. Knowing which blade to use when working on a project can be a very confusing things and I hope that this video will alleviate some of the confusion. Thanks for tuning in.
You will do just fine Robert. I have faith in you. If, at any point in time, you have any questions, please don't hesitate to reach out and ask. I would be more than happy to help out if I can. Good for you for learning this new area of woodworking. Thanks for tuning in to the program. If you haven't already, I do have a couple of beginner lessons on the channel. You can find them here. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8b_FWeCcFeg.html and ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BmHuTuOyFZo.html
You are very welcome Barnie and I'm glad to hear that you found the show useful. Thanks for tuning in and if you have any questions, please don't hesitate to ask.
I can't believe i spent nearly 40mins listening about Scroll Saw blades? and i don't even own a Scroll Saw ha ha ha However a very informative view and great explanation on blades, which only you Kenny are the best at doing. I think i need a coffee now after that ha ha ha. Barry (ENG)
Thanks for the compliment. I'm glad that you have found the show useful and please feel free to ask any questions that you might have. Thanks for tuning in to the show.
I Can't thank you enough for this tutorial on navigating the plethora of "Scroll Saw Minutia" that exists out there! Finally I know what the numbers mean and how to choose the right blade for the job at hand. Awesome info!
Glad that you found the show to be useful Mark. It's a long episode of the program but there is a ton of information packed in there. Thanks for tuning in to the show and taking the time to leave the kind words. It's very much appreciated.
You're very welcome Rose. This show is a basic guideline and is by no means written in stone. If you ever find that you are having issues with a certain sized blade cutting a certain thickness of material and a new, sharp blade doesn't work......there's nothing wrong with going up one size and trying again. Some species are just harder than others and some grain patterns are tighter. Thanks for tuning in to the show. Good luck with your blade selections and your scrolling.
Wow Kenny, very useful information about scroll saw blades. And for me, being a Latino very easy to comprehend because you speak in a paced manner... Very nice to see your tutorials, easy to see you have lots of experience scroll sawing, GOD bless you.
I've always wanted a scroll saw and recently acquired a lightly used DeWalt DW788. Your video has helped clarify the "confusing" range of blades available. Many thanks for the insights provided.
Glad that you found this video to be useful David. If you have any issues or any questions, please don't hesitate to ask. I'd be more than happy to help if I can. Thanks for tuning in to the show.
Thank you, that clears up a lot for me. I bought a Dewalt 788 years ago and have been scared to get started. I am disabled and am starting woodworking at 54 years old, and less likely, female, so I am different from most. I subscribed because it seems you really know a ton, and I want to learn. Thank you again, and please, keep making these. You are easy to understand.
I'm glad that you found this show to be useful for you Sandi. Scrolling is the most relaxing form of woodworking there is and once you get started, you wont be able to stop. I have two shows on the channel called "Scrolling for Beginners" and you might want to check them out. There is a ton of information in them that you might find useful. As for starting at age 54 and being female....I think it's awesome. You age has nothing to do with your ability to produce beautiful project and whether you are male of female has nothing to do with it. Some of the most incredible and artistic woodworkers are female and what really matters in the end, is how much you enjoy the hobby and the self satisfaction that it brings you. I just know that you will do fine. Good luck with your adventure and please feel free to ask any questions that you might have along the way. You can contact me via the channel's Facebook page or via email or through commenting on the show. Thanks so much for tuning in. (p.s. check out the scrolling projects playlist on the channel if you are looking for a little inspiration)
@@acutabove_woodworkings I watched the two part video on beginning scroll sawing first, and that gave me the courage to put the only blade I had, a 15, and a piece of pressboard paneling we had laying around, and finally use the saw. It was not ideal, but I was able to make straight lines and curves, over and over, until I ran out of scrap wood. I was very proud of getting past that hurdle of turning it on. I have been sewing since I was 10 and it reminds me a lot of how a sewing machine works, let the machine do the work, if you push or pull, it messes up the material. I still need a lot of practice and find a way to get more scrap wood. I bought new blades. I am already seeing a lot of ideas in my head. This has me very excited about my new hobby. I’ll be watching 😁
@@sandisslantoneverything My wife is often quite jealous of how I can sew a perfectly straight hem on her sewing machine and I contribute it to the years of scrolling. The main difference between the sewing machine and the scroll saw is that there is no blade drift on the sewing machine. It can really be challenging to control at times. Keep up the great work Sandi. I have all the faith in the world that you will master this in no time. You seem like you have your goals set. If you ever have any questions, please don't hesitate to ask. I look forward to the day that pictures of your amazing projects show up in my email inbox so that they can be featured on my regular "viewer mail" segment of the show.
You're very welcome Ann Marie. I'm glad that you found the show helpful. If you have any questions along the way, please don't hesitate to ask. I'd be more than happy to help if I can. Thank you for tuning in to the show.
TY for a fine production. At age 70, I am getting into scrolling so that I can SIT DOWN and still accomplish something. My chainsaw days are almost over.
It's never too late to learn Glen. Good for you for taking the initiative to try something new. Be sure to check out my videos "Scrolling For Beginners" Parts 1 and 2. They might help you along with some of the frustrations associated with learning something new. Thanks so much for tuning in to the show and taking the time to leave the kind words. It's very much appreciated. Please feel free to ask any questions you might have along the way. I'd be more than happy to help if I can.
Glad that you found it to be informative John. Good luck with your scrolling and if you have any questions along the way, please don't hesitate to ask. Thanks for tuning in to the show.
I hope you enjoy scrolling Marty. It is (by far) the most relaxing form of woodworking. It takes practice and there are not many people who are good at it right out of the gate but if you have some patience and take the time to practice, you will have a life long hobby that you will enjoy. Thanks for tuning in and for subscribing. I appreciate your kind words and I look forward to your future comments on the show. Good luck with your new scroll saw. Please, feel free to ask any questions you might have along the way.
Just got a scroll saw a couple of weeks ago. I learned so much about the maddening variety of blades. Luckily when I bought my blades I bought Olsen in PGT, reverse tooth and some skip tooth. Not knowing anything them, now I do. Thanks
Sounds like you're all set for the scrolling experience. Be sure to ask any questions that you might have while you are learning about the saw. I'd be more than happy to help out if I can. Thanks for tuning in.
Congratulations on the new tool John. I hope it serves you well. If you have any questions, please don't hesitate to ask and I would be more than happy to help you out if I can.
Thanks again, followed your link from the other video and this was most helpful. I now have a selection of blades and will test out what suits me best. Also thanks for your previous response - you're the first one to ever answer on here, so thanks for that as well. I was completely impressed with the artwork on about minute 34. That's incredible.
You're very welcome Rey. I'm glad that you found it all useful. I do my best to answer every single comment that I get on the channel. While I admit that there are a few that I somehow miss, for the most part, I am able to keep up with them. Thanks for the kind words on the cuttings and for tuning in to the show. If you have any other questions, please don't hesitate.
You are very welcome Carlo. I'm glad that you enjoyed the shows. If you have any questions, please don't hesitate to ask. I would be more than happy to help if I can. Thank you for tuning in to the show.
Sir, i bought a small set of blades, 10/15/18/24TPI, i tried all of them on the same wood, plywood 4-5mm but only the 24TPI was cutting easier and faster, why that? With the 10/15/18 i had no difference, they cut little difficult and slow, exactly the same all of them. Normally the 10TPI would cut faster and easier i guess or i missed something? 🙂 It's the hardness of the wood? My blades are not so good? (Pin, flat, downstroke). Is it how the scroll saw works as a machine? I used to work with my band saw (the same as yours) which cuts fast and easy, maybe the scroll saw works slower? 🤔Thanks.@@acutabove_woodworkings
@@labis6466 The teeth on a scroll saw blade are much smaller than a band saw blade and will cut much slower in general. The blades that you have purchased might not be as good a quality as some blades on the market. Normally, the higher quality blades are listed as a universal number system and it's difficult for me to say what number of blades you are using. In general, yes, the lower teeth per inch should be a much more aggressive cut but there are a lot of factors that determine that. Hardness of the wood. The glue in the plywood. Grain direction etc. It's all about finding the blade that works with the stock. With pinned blades, normally, the larger blades with the lower TPI do not have as wide of a kerf in their cut which can also slow down the cutting process. Keep in mind though, the scroll saw is not a fast cutting machine. It is meant for slower, more controlled cuttings. I hope this helps.
Thank you so much for your help and the detailed answer! One more important detail came out today about the blades, i will check it out and i will compare them with other more famous brand blades. I guess i need a Ferrari Scroll Saw 🤭, i recently bought my scroll saw, i am not so happy with the speed as with my other saws (i love woodwork) but i will start to work with it and make beautiful things, it looks a great tool@@acutabove_woodworkings
I just bought a used scroll saw it only came with one blade.. I. Going into town tomorrow to grab a few blades.. this video was very Informative..thank you
I would rather give the extra information than to make a quick little compressed video that provides no real information. I'm glad that you liked it. Thanks for tuning in to the show Norman and for taking the time to leave a comment.
You will find that after a while, it becomes second nature. You will also find that you gravitate to a small handful of blades that you use. Good luck on your new adventure and if you ever have any questions please don't hesitate to ask. Thanks for tuning in
I'm so lucky I found your channel your the swiss army guy of blades love the help this video did for me and yes you filled this noodle thanks for this video I'm new to scroll saw work and still learning on what blades did what and now you have help me with it thanks
You're very welcome. If you ever aren't sure, I'm always available to answer any questions that you might have. When I first started scrolling, there was no such thing as the internet and the only way to learn was by books or practice. I'm only too happy to help you out while you are learning to scroll. Feel free to ask any questions you might have along the way. Thanks for tuning in to the show.
Thank you Kenny. Exactly what I was looking for. So many just explain the different type of blades but never actually tell you what you need to get started. Really appreciated the tip about if the saw is cutting too fast or too slow then change blade size. I've ordered the scroll saw was now trying to work out which blades to order to get started! Thanks again. I've taken notes and shall no doubt return! By the way the video I watched before this was a really quiet one and I'd had to turn the sound right up!! Your intro music about blew the windows out!
Sorry about your window Richard. This is an older video and the volume on the intro has since been reduced because of several complaints. I'm glad to hear that the show was useful to you and if you have any questions, please don't hesitate to ask. I'd be more than happy to help if I can. Thanks for tuning in to the show.
So I started with scrolling about a year ago and watched this video back then. However it was a while before I did any fine work and needed specific blades and had forgotten everything you had covered. Now I am doing a lot more scrolling and have started using some very hard wood 3/4" think and was struggling with wood burning and could not figure out why. I even tried layers of packing tape on the front and back of the pieces to try and give the blade more lubrication. So now, watching this video again I have realised I am using completely the wrong blade. I am using a number 2 instead of a number 7 or 9. So thank you so much for sharing your knowledge in such an easy to follow tutorial. I am confident of selecting blades now that will work much better for me. By the way, in my part of the world Olson blades are 5-10 times more expensive than the blades I am buying. I started with Olson blades so I know their quality, but the ones I am using now have very similar quality so I do not understand the price differential.
I can't speak for the price difference of the blades Doug but if you are happy with the cheaper blades you are getting, then that is all that matters. One of the most important aspects of scrolling and having it be an enjoyable process, is blade selection. Select the proper blade and you will have a wonderful, enjoyable experience. Choose the wrong blade, and you will have a frustrating and worthless experience. I'm glad to hear that this video is helpful to you. Thanks for tuning in and good luck with your continued scrolling.
Holy smoke, Kenny.....that scroll saw project you showed is an awesome piece, and I applaud both your skill and your patience!! Oddly, a scroll saw (my grandfather's old belt-driven beast!) was probably the first power tool I ever used, at about age nine or ten (back in the fifties!), but the one I know the least about, in terms of details like blade selection! That Excalibur saw is a beautiful tool, too. To start, I just got myself an inexpensive Ryobi, but it seems to serve my purposes OK...at least for now. it's variable speed and accepts plain end blades, so I'm free to select blades pretty freely, unlike a lot of other inexpensive saws (that I found only use pinned blades). I took your advice, though, and added a foot switch which has made things much more convenient. Thanks for clearing away much of the blade selection 'fog.' I'm in the midst of a project using 1/8" stock. The Olson spiral blades do make it easier (cutting out names written in cursive) but you are absolutely correct: I spend a lot of time with sanding sticks in my hand! LOL When I have more time, I'll get braver and try something similar using 'conventional' blades. Thanks again...and I look forward to your next video. :-)
Hang in there Norm. The scroll saw isn't something that comes naturally and it take a lot of practice to get it right. While spiral blades do have their place, for lettering in 1/8" stock, you would probably get better results from a #2 reverse tooth blade. While you edged may not be perfect, the amount of sanding that you need to do will be minimized. The perfect (or close to perfect) edges will come with practice. Thanks for tuning in and for taking the time to leave me a comment. I appreciate it very much. If you haven't already, you might want to check out the two part series on scrolling for beginners here on the channel. It might give you some pointers on control and learning the craft. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8b_FWeCcFeg.html If you have any questions along the way, please don't hesitate to ask. I'd be more than happy to help if I can.
You're very welcome Charles. If you have any other questions, please don't hesitate to ask. I would be more than happy to help if I can. Thanks for tuning in to the show.
The piece you showed with the cat was beautiful. Growing up our youngest son's best buddy was his cat. The cat lived to be 19 and it broke our hearts when she died. I've got pictures of them together and if I think my skill is up to the challenge I will attempt to see if I can do as well as the master.
I hope you are successful with your project. I'd love to see it when you are done. Good luck and thanks for tuning in to the show and for the kind words.
Glad that you found the shows to be useful Bobby. Please don't hesitate to ask if you have any questions at all. I'd be more than happy to help if I can. Thanks for tuning in.
Another great video for scrolling. I am buying a second scroll saw before I even get started because its going for cheap. I will check out your other videos for tips. Thanks for sharing.
You're very welcome. Good luck with your scrolling and if you ever have any questions, please don't hesitate to ask. I would be more than happy to help if I can. Thanks for tuning in to the show and subscribing. I appreciate the support.
This is great information. I just received a scroll saw 16 inch never used it and don’t know anything about it. So this video is become very helpful, can’t wait to get started on some projects. I’d like to go out and buy a variety of blades for all projects and woods
I'm glad that you found the show to be informative Darin. I would suggest that if you haven't already, you might want to check out my two part series on scrolling for beginners. There's quite a bit of information in there that might helps you. Here's some links. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8b_FWeCcFeg.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BmHuTuOyFZo.html As well, you might want to check out the video on scroll saw accessories which can be very helpful when first starting out on the saw. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZNso4hITeq4.html Good luck in your new adventure. If you have any questions along the way, please don't hesitate to ask. I'd be more than happy to help if I can. Thanks for tuning in to the show.
@@acutabove_woodworkings hi. Thank you for responding so quickly, all the different types of wood and what blade to uses with which thickness, and types of woof for what blade to use. It’s almost like making a food chart, for hard wood is one type of blade and soft wood you use a different one. And for the type of projects you uses another type. So. Much to remember. Thank you again for the links. I’ll be checking them out now. I want to use a wood for outside that will last for a squirrel house besides cedar. And I’m making a store front fake facade to attach to the fence post. I’d like to paint it so it will last.
@@darinbrousil1715 I know it seems confusing right now but as you work with the saw, you will get used to just being able to pick a blade from experience and not from a chart. It takes time but you will get there.
Glad that you liked it. Blade selection is one of the keys to getting good results on a scroll saw. After a while, it becomes second nature to choose the right blade and at first, there is a lot of experimenting to see what blade cuts best but once you get it, it's very satisfying to be able to pick the right blade immediately when cutting your stock. Thanks for tuning in.
Very informative video, i'm just starting out on a scroll saw. Olson blades are sold in my area. I have noticed that the two blades that you personally use are the #2, #3 reverse blades.
I mostly use those numbers with the #3 being a mach cut blade. The other blade that gets used a LOT is the #7 PGT from OLSON for thicker stock. I hope this helps. Thanks for tuning in to the show Jeff.
Just opened my first scroll saw and was feeling a bit lost. Thanks for all your help! I'll be sifting through your channel. Mostly 1/2 inch stock, think I'll grab some #7 PGT reverse tooth blades...
Hey Dave. For 1/2" stock, if you are getting some PGT blades, you might be just fine with a #3. Those blades cut really well. The #7 will be fine for the cut and will also be good for 3/4" stock as well so the #3's are not a requirement, but it's always nice to have extra blades in your arsenal. Thanks for the kind words on the show and for tuning in.
I'm glad that you liked it Michele. If you have any questions, please feel free to ask and I would be more than happy to help if I can. Thanks for tuning in to the show.
You're very welcome Jean. I'm glad that you found the show to be useful. If you have any questions, please don't hesitate to ask. I'd be more than happy to help if I can. Thanks for tuning in to the show.
You are very welcome Stephen. I'm glad to hear that it was helpful to you. If you have any questions, please don't hesitate to ask and I will do my best to help out. Thanks for tuning in.
You're very welcome. I'm glad that you found this video helpful as well. As always, please don't hesitate if you have any questions. I'd be more than happy to help if I can. Thanks for tuning in to the show.
@@acutabove_woodworkings thanks. are Blades numbered the same way in the UK? I'll be working with 3/4 to an inch thick wood. I'm thinking nothing lighter than a no.7? Also my saw is 2 speed. Would the lower speed be for thicker timber with lower TPIs. Many thanks.
@@nervouspenguins9982 Not exactly sure how the blades are numbered in the UK, but I would think that they would be the same as they are universal numbers. As for the 3/4" stock, I would use a number 7 reverser tooth blade. I prefer a PGT blade as they are a little more aggressive but a regular #7 should do you fine. As for the speed of the saw, I would keep it to the lower speed until you get the hang of scrolling. Speed is more of a control thing. Using a higher TPI blade, in thicker stock just overheats and breaks the blade eventually. Using the correct sized blade for the correct thickness is the most important thing and the speed isn't a factor in the actual cutting. The only time that speed affects the cutting (IMO) is when you are cutting something that could melt (like plexiglass) or something that requires slower speeds such as metal cutting. Other than that, feel free to cut at whichever speed you are comfortable with. I hope this helps.
@@acutabove_woodworkings success. Mounted a no.7 blade and produced a letter P, A and E (familys' initials) and a wonky easter bunny. Blade jumped out a few times so a lot to learn about tensioning etc but I'm on my way. Thanks again. P
The variables of the materials you just mentions are endless. Plywood is largely varied in blades sizes according to thickness, the number of plys, the species of the plywood and how intricate and tight your design for cutting it. Hardwoods are also governed by the same variable but the species plays a huge part because the size blade you would use on walnut, would never cut through Purple Heart. Acrylics can be tricky and again, thickness plays a part in your blade selection but also, the speed of your saw also plays a huge part because heat is a contributing factor in getting a clean cut. Too much speed with a larger blade will create large pockets that melt back together, leaving a poor cut quality and a mess to clean up while using a smaller blade with too much speed will result in melting the acrylic immediately after cutting it, causing the blade to jam and possibly break. Metals are another completely different story. Thickness plays a huge part but for the most part, the blades that are used are a high TPI and they are run at extremely low speed to avoid friction and heat, and allow the gullets of the blade to clear the metal filing from the cut kerf. Basically what I'm saying is that there is a lot of experimenting that goes on with scroll but using the basic knowledge of this video will give you a starting point as to what blade to choose and what to expect from it. During the cut, if you know the signs to look out for, such as burning the wood, having to apply too much pressure to cut etc, you can adjust your blade choice accordingly and eventually it becomes second nature. It's pretty rare for me, after almost 30 years of scrolling, that I choose the wrong blade for the job. It's all about experience and knowing what to look out for and how to adjust accordingly. I hope this helps a little. Thanks for tuning in to the show.
There has never been anyone in the history of scroll sawing that has ever lost a finger using a scroll saw Nancy so you have nothing to worry about. A little knick may happen from time to time but nothing serious. Good luck on your new hobby and please don't hesitate to ask any questions you might have. I'd be more than happy to help if I can. Thanks for tuning in.
Thank you for this video I am just starting and didn't know how to choose or if I need to change the blade on my saw I just got used. Very informative video.
Glad to hear that you found it informative Jim. It's a lot of information to digest all at once, but truth be told, as you get into scrolling more and more, you will find that there are only about 3 blade sizes that you will reach for and those 3 will incorporate everything that you do. Everyone's blade sizes are different depending on the style of their cutting. For me, it's either a #2, #3 or a #7. It's pretty rare that I reach for anything else. Good luck with your scrolling and thanks for tuning in.
Excellent video, nice that you take your time and explain everything clearly. Just about to buy my first saw and this has been a huge help. Many thanks Kenny and greetings from the UK. Subscribed!
Glad to have you aboard as a subscriber Hugo. Please don't hesitate to ask if you have any questions at all. I'd be more than happy to help you out if I can. Thanks for tuning in to the show.
@@acutabove_woodworkings Hiya Kenny, actually, I do have a quick question if you don`t mind. I don`t have a lot of money to spend on my first saw, and I`d like to try it for a while anyway to see if I get really into it before shelling out on a Hegner or similar. Problem is, there are plenty of cheap ones on the market in the UK, IE under £300, but every single one of them seems to use the same dreadful allen bolt clamp adapters for pinless blades, the bottom one drops off the hook when the blade it released and the top needs a tool and a lot of fiddling about every time. Any idea if anyone makes a budget saw with quick release clamp? Or an effective mod? Any suggestions much appreciated.
@@hugostare8695 I'm not too familiar with the brands or saws that are available in the UK. I did find this one, www.rutlands.co.uk/sp+power-tools-machinery-scroll-saws-variable-speed-scroll-saw-with-rotary-shaft-package-rutlands+dk7170#nogo which seems to be a fairly good entry level saw according to the specification, but I can't tell in the picture if it has the blade adapter that you are complaining about. It might be worth looking into. Barring that, you really can't go wrong with a DeWalt, DW788 scroll saw as an entry level saw. (if they are available in your area). I hope this helps.
@@acutabove_woodworkings Thanks Kenny, much appreciated. Thanks for taking the time to look these up. Rutland saw uses the hideous clamp adapter arrangement unfortunately, and yep, the Dwalt is very desirable and available here but well out of my price range, around £700. But, I had a spot of luck today, picked up this locally, second hand, light use, couple of years old, for £300! Think I`m going to enjoy this.. www.axminstertools.com/axminster-trade-series-ex-16-scroll-saw-101771
@@hugostare8695 Looks like you have a nice saw there. It is very similar to the Excalibur EX-21. You should be happy with that. Good luck with your adventure in learning scrolling. If you have any questions along the way, please don't hesitate to ask.
47 thumbs up after 1.1k views - Wow that's a tough crowd! That was one terrific explanation. Thanks for taking the time to do that for us all Kenny. Already ordered the blades before I've bought the saw. Will start with the Ryobi, because here in Australia the next level is Au$1,000 and the Ryobi is $129. If I stick to using it long enough to be frustrated by it, then I'll invest in the better ones.
Sounds like a good plan Howard. If you haven't already, you should consider checking out some of my beginner videos on the scroll saw. One of which is the buyer's guide and the beginner lessons on scrolling. As always on my channel, if you have any questions, please don't hesitate to ask and I would be more than happy to help you out if I can. Thanks for tuning in.
I already did, before I got to this one. However, I don't remember viewing the buyers guide - will search. However, there is very little range here. Ryobi, economy jet and then it's next stop Excalibur loookalike. Must say, your presentation is enough to excite the interest of anyone remotely considering the hobby.
Thanks for the compliment Howard. Here is the link to the buyer's guide if you are interested. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kBCdGKTaQms.html Just for a little information, don't get your heart set on an Excalibur scrollsaw as the design and the rights to it have been sold and they are now called the Excelsior. I have been informed by the old manufacturer that the new company is using the same specifications that Excalibur used to. Either way, I've also heard good things about the Jet. Feel free to ask questions along the way. I wish I had someone to teach or help me as I was learning but the internet wasn't a thing back then.
Blade selection is probably the most important factor when it comes to good results on the saw. I hope you found the show to be useful. Thanks for tuning in.
@@terrygabrielson5598 Glad to have you aboard as a subscriber. I hope that you will find many other projects and episodes to enjoy. Feel free to comment or ask any questions that you may have at any point in time. Fridays, are the woodworking episodes of the show and Tuesdays can be anything from tool reviews, to rants, to resin work or welding....basically, whatever I feel like doing that day. I hope you enjoy the channel. Thanks for subscribing.
Another cracking video which made tons of sense about the bewildering subject of which blades LOL I've bought some pinless 28 TPI for 1/4 " hardboard hope I've made the right choice Kenny ? Thanks again .
The blade that you purchased (28 TPI) is a universal #2 blade and should be just perfect for 1/4" MDF or hardboard. You've made the right choice. Thanks for the kind words on the show and for tuning in. It's very much appreciated.
Glad that you found it to be useful Rodney. Thanks for tuning in to the show and taking the time to leave your comment. If you have any questions along the way while learning to scroll, please don't hesitate to ask.
I never knew there was so much variety, but you made it easier to understand. So, a 2R should be fine for medium hardness 1/" balsa wood. Do you have a suggestion for 1/2" balsa wing ribs (gentle curves)?
A 2R will be perfect for 1/4" balsa and for 1/2" balsa, I would consider a #3 PGT blade to be more than adequate. I hope this helps John. Thanks for tuning in to the show.
Ken, interesting show. I find that the majority of the time I use either a 2 or 3 reverse tooth and once in awhile a 7. You can probably guess that most of my work is in thinner stock. I have yet to try spiral blades but you make me want to give them a try. I am curious about the fretwork you showed, where did you get the pattern and what kind of wood did you use? It looked great. Thanks for the informative show. Paul / paulsmessyworkshop
That patterns are of various sources Paul. Some, I make myself and others are from magazines etc. The wood that my scrolling is cut from is 1/4" thick solid oak and it really is a challenge to cut the intricate pieces in a coarse stock like oak without breaking pieces. Thanks for the kind words on the show and for tuning in my friend. It's great to hear from you.
You didn't cover all the blades out there! Does that mean the will be a part 2? 😂 sorry, couldn't help myself... This very really informative and beneficial to me.
No, I think I've covered enough blades for now. LOL. Besides, I don't think that I could talk any more about it......okay, maybe I could. I do have the gift of gab after all. Thanks for tuning in again this week.
@acutabove_woodworkings thanks for clarification. Your work is amazing! You must be a very patient person... If I am working with wood from 2 mm thin to 1.5 cm thick...some soft and some hard...what 3 blades should I start out with. I know I want a reverse blade for minimal sanding. I will be potentially be making replacement pieces for inlay, name plates (cutting the names out of the middle), cutting out whole words thick enough to stand up on their own and probably jewellery pieces...oh and jewellery boxes... What is the make and model of the small accordian hose you have attached to your saw please?
The main blades that I would suggest are a #2 for thinner work, a #3 PGT for cuts up to 1/2" thick and a #7 PGT for cuts 1/2" and over. I hope this helps. The according air hose doesn't have a brand name. It is a part of the saw. Most scroll saws will come with a blower tube of some kind. Mine is just an accordion style. I hope this helps. Glad that you found the blade video. Thanks for tuning in.