125cc TURBO Go Kart Build | Part 5 (Fuel Injected) 

This thing just keeps getting better and better...Fingers crossed we can wire it up and get it running with BOOST next video!

Now thats what I call a powered cart. Actually looks so beautiful. Definitely something I would leave in my living room

You need a chain guard to protect your fuel pump and tank incase of a chain breakage

Run your fuel pump, ecu and battery under the seat. Put the seat on a flip up hinge with a latch. Just a thought bro. Love ya work. Cheers

This thing is dope! I would've mounted the tank vertically or in the front, to lessen slosh. I cany wait to see it rip!

I love this so much.. Personally I would have fixed the tank under my seat and run some sort of wee surge tank.. but shit... can't fault this wee build one bit lad

looks mad, but there is a problem with the fuel tank laying down.. even at half a tank the fuel is going to wash to one side when you drift and starve the pump. might have to mount it upright. that will open more space for the battery anyway. fill up the water bottle 3/4 and swing it left and right you will see

My dude! Another fantastic vid. The build is looking SIC!!! Have fun in NZ and catch you soon.

Just me.? checking constantly when the next video of this thing is posted😂

Looks good man, this makes me want to fix my 125cc mini chopper

Loving the quality of the vids my guy 👌 keep up the good work

Sick mate. Looking forward to the next one.

Looks sick man, loving this build. The number plates would look a bit more in place a bit lower in my opinion but still looks good. love the build

Awesome build. The number plate is a bit too big, would look way better if it was slightly smaller? ❤

YOOO thats fire hope to see you in nz keep it up videos fire as always

No judgment but you throw al the parts at it but cheap out on the axle? Love the build been watching for a while just curious

Next video- I put a v8 twin turbo in a drift go kart (fuel injected)

Cher bro ..welcome to NZ

this build is amazing!

Such a shame to hide that fuel setup! It's neater than my cars set up😅

Are you ganna be at keep rest event in may 24th

I got add myself😂🎉

are the rear tires on backwards?

Omg yaaay 🎉❤

PLEASE 🙏 DON'T PUT WELDING PROCESS ON STREAM PLEASE 🙏

The fuel cell looks sweet, but I think it would be best if you either sloped the tank or added baffling inside of it. Other than that love seeing the progress!

I'm not sure if this has been mentioned but I figured it's worth mentioning. I know you're not going to drive this thing much and wet weather and it probably doesn't matter because you're going to run PVC sleeves over the tire but your tires are backwards. Like if you literally just swap the right to the left and left to the right you'll be right. The way you have them on now if you were to drive it in wet weather you'd be sucking water straight to the center of the wheel whereas the other way around under proper rotation those will be expelling water. Just food for thought, love the videos keep it up can't wait to see this thing going fast

how the hell does this thing keep getting better and better XD

Could you test the gas tank for leaks? I would create a custom adapter that attaches from your air compressor to the gas tank. Then, blow compressed air into it to ensure it's 100% leak-proof. The battery is right next to the tank, and if it happens to be leaking when a spark occurs, you can risk a fire.

sorry if it's too late to say this - but you could use a monster energy 24 Fl oz can as a tank. its aluminum, light, and resealable. I saw someone use that on their race kart build. plus, its monster energy. also, if you want to keep that ecu, or any other important stuff back there safe from wheelies, then add a cage around it.

I'm glad I found your channel, I just love projects like this. Cannot wait to see it rock and roll!

It may not have originally seemed necessary but I would have added baffles inside the fuel tank to help prevent fuel surge

in the future put the ecu in a stainless or tupper ware box under the seat

Not to criticize, but the rear wheels are mounted backwards and do not fulfill their function of evacuating any water that may be on the road😅

To utilize space you could put the battery behind the engine under the seat and if the axel snaps the wheel might take the fuel tank with it just something to think about looks great though cant wait too hopefully hear some turbo noises ❤

Definitely keen to hear this dose. Gunna be epic.

Another awesome vid. I'm looking forward to the end result! Great to see that you implement suggestions in the comments (also from other comments). The cart looks so sick. That silicone(?) extender on your filler neck, is it for fuel? It will be fine for a couple of weeks/months depending what material it is but after it will dissolve into the fuel. I'm not sure having the tank at the back is disastrous. I guess filled it would be below 5 kg total, so it's not a big impact. Extending the frame 100mm will definitely help lots.

that intercooler just makes it 10x better haha

You've been holding off on your tig welding skills mate! those welds looked very acceptable! the fact that most of the welds had some colors in it is a HUGE step 💥💯

You guys are really milking this build.......5 videos and you still haven't driven the kart? Next video you're going to 3D print new tires? Come on!! Drive it already!

If I didn't know any better, I'd think I was watching an episode of mighty car mods. All you need is your own version of Moog, the comic relief, and you'd be plagiarising there whole youtube career!

Been watching you build this fucker since the second or third episode. Every couple of episodes I forget and have to rethink just think how crazy this thing is. How far it's come from what it was, is off its head! Be funny to see a drift wing or a fuzzy dice holder or something dumb added to it. Awesome shit man, you better fkinn jump the dawg

I've been seeing others commenting about having an increased volume right before your intake valve. As a sort of leveler of boost pressure of single cylinder engines in between intake cycles. I've been thinking about this and watching other youtubers, and they are rarely intercooled. I think having the intercooler would serve this purpose. Sorry if this comment is too late and you have already started production of it. Maybe if it runs rough, it's worth a try, but I don't think you will gain much in this setup. Looking forward to the next one!

Put wheelie bars

I would keep as much weight off the ass of it as humanly possible. I definitely would have done a motorcycle style gas tank and definitely would have put the battery behind the intercooler.

You put the wheels on backwards.

It’s cool but man you guys have so much weight at the back of it I’d probably extend the rear wheels further back or it’s just going to pop wheelies

Video number 2 of asking to see bash bars on it

Dunno if its gunna worry it but the return might blow fuel away from the pick up or push airated fuel past the pick up, probably less chance on that style pump but keep it in mind if you start having issues later

Flame shield between batt/tank pump? Love it though bro.. much love 🤟

Battery underneath your bum, stand the fuel tank vertically either behind the intercooler inside the nose frame or mount it above it following the steering column line.

The build quality, the video quality and how energetic you are towards this build is so awesome to watch. Thanks for another great video, friend

You could have had a longer fuel tank if you had mounted it vertically right behind the seat and it would still have that fix for the gas swooshing around also from g forces and it would be centered. Also you could had the the tank filler in the center behind the seat instead of on the side

A beefy bracket for the exhaust would be nice. V-band rotates under vibration.

Can we get the link for the fuel pump?

number plate looks dumb that big get a moped or motorcycle plate size saying boosted

love the build bro keep it up, you could probably fit the ECU under the seat as well I reckon

12v lipo batteries are lighter and smaller but can drive a starter motor. People use them on their boats, I bet you can in a go kart.

keep up the work mike amazing will there be a budget run down on how much u spend if not all good bit i recon put a metal plate where you crotch is above the motor it will look amazing where are u off to into new zealand i live there

I think you need some kind of chain guard in case of a snapped chain hate to see you flying down the road on fire. Love your work mate peace

One thing came to mind maybe put a washer on the bolt that mounts the tank so it’s at a very slight angle so the fuel drains to the pump easier

I would move the tank and fuel pump to the front so it’s not by the exhaust just thinking it get a bit hot like

bring yah warm stuff shes getting abit cool here in NZ, will you be here for D1NZ at baypark?

This is a mad build man 😀 love it 😅 and thank you for taking the time to take a picture with me sorry I took so long I have autism and ADHD and I freaked out and had the shakes for a second and I got the picture before you said "hurry up I have to watch the next run" and I was appreciative of your niceness and how you took the time out of your day to make someone happy I can't wait to see you send it again and hopefully I can get another picture haha thanks for the content and the picture at adam lz world tour Australia 😊

Im gonna finish the proyect but too much talk no much kart...

After the turbo you should install a quickshifter

I’m interested to see if it actually makes any boost without a plenum

So episode 10 will be first start and episode 17 we might hear it dose sut sut sut tutututu ffs

If fuel tank was vertical, there would be less fuel surge?

order daytona 190cc motor its the same size but it has more power

My personal preference for axles is a 25mm 980mm long axle, with the 23spline ends, it beans boring the sprocket and brake rubs to fit, and a light machine on the axle to get is perfectly straight, as they are designed to have the brake and sprocket on the outside of the bearing then a spacer and then the wheel hub, but I put both the brake and sprocket inside the bearings so had to machine it to suit. But this is a gokart that I built to take a 420cc engine that blew up, so went back to a 212cc that is worked and has 16hp at 7000Rpm and a 7500 redline, and with a 6:1 gearing it's till damn fast, 110kph with 18x8.5x8 tyres, and a bit less for 15x6.5x6 tyres, but better acceleration and braking. I've always just used a gravity fed Mikuni carb, bit I guess you have fuel injection with a electric pump, that makes things much easier for locating the tank wherever if fits.

Put your seat on a hinge, looks like there was plenty of room to the battery there

Silicone hose on fuel tank won't last long bro best to find another solution

well done that tank looks awesome, im learning tig too i might make my own tank too

tires are backwards, pointy thread forward.

I just stumbled upon you for the first time bro. I'm hooked. This cart is absolutely BAD ASS. Can't wait to see her go.

I would really like to see suspension on this turbo cart

Bro I think those rear wheels are on the wrong sides look at the tread

I LOVE THIS CHANNEL GOOD VIBES FROM AMERICA ❤

Amazing Mate! 🤠👍

11:54 bro could be a surgeon with those still hands

Probably wouldn’t make much of a difference but the welds on the axils, may look a lot cleaner if you had them turned down on a lathe to blend them in with the original axils

Dude that looks so good looks like a fun project

How's the progress with the ecu?! Eagerly waiting to see the challenges and how you overcame them.

So sick 🔥the little turbo looks so badass 😍🔥

Yeeeeessss!! I’ve been waiting patiently for this so glad to see this. First one on RU-vid to do it right too

Fuel pump looks like a car washer motor. I thought that's what it was for a minute. Lol

the fuel tank looks like an exhaust muffler

The rear tires being on backwards is hijacking my OCD

Love this project, just bought a mini jeep w/ a 125cc for my grandkids. I have a question, perhaps i missed it but what EFI setup are you using?

hey mike, question.. Where is Night Ride crew in NZ? I'm curious because I (a person who as lived in NZ my whole life) dont know where it is aha

Just me or are the rear wheels facing the wrong way? Think u put them on the wrong way, treads backwards… anyways great video, absolutely lovin’ this series

Yayayay another episode I love this series so much keep it up mike 👏

Maybe go smaller on the rear sproket, less torque, more top end?

Are you guys gonna add a speedo? Cant wait for the next update

Looking great amazing job attention to detail helps for what it's worth centre drilling and driving a pin in both ends of axle helps line it up and strengthen it we have made similar previously and even ground them down because they were migged lasted burnouts endless donuts etc rule of thumb quarter of diameter driveshaft sized inner pin thickness and diameter of driveshaft deep both ends off had any fail fixed bunch machinery at work with similar principle turned down helps but in a pinch rotating with grinder helps love the cap fixture great job 🫡👌🏴󠁧󠁢󠁥󠁮󠁧󠁿 keep updated coming asap!!!! 😬

Came here from IG reels, so happy it got recommended to me

Love the content bro❤ suggestion with the fuel tank: flip it up right so its less likely to starve the pump and if it's sideways and your going sideways ;) it will probably struggle on one side. Yours was a good concept though mate 😊

im a fanatic for the tilt

Bro amazing work !!