#1475 

I love your epoxy resin the most. As I'm looking at my shelf, I realize that all my resins are now your brand. Lol. I also have some of your molds, and they are great quality. As a matter of fact, as I'm taking a quick inventory, I have loads of your products. So I'd say that speaks to the quality etc of your products.❤

Beautiful!!! You did an amazing job so stop criticizing yourself!!!🎉

That gold teardrop with the defect looks like a dandelion. Bet with your artistic talents you could make it look even more like one. Great job!

Wowzas! Yes I'd love to see more. You could glue a magnet on the back of the heart and put it on your fridge 😘

Gorgeous! I've been playing around with holo too...and let me tell u it is challenging to get it to be "perfect". It's frustrating, but I'm going to continue experimenting as well. 😻💜

Very pretty!! You can't go wrong with holo!! 😍

I love these, please do more! I enjoy your experiments! Thank you!

They turned out so nice! Thanks for sharing!

These turned out really beautiful. I would like to see you do more of them.

Incredibly cool! Love them.

Really beautiful!!! Thanks for sharing.

They came out beautiful Julie 💙🥰

I wonder if using a silicone mat under the pieces would keep the inlay from picking up dust and stuff from your wood table.

These are so lovely! I haven’t really liked the holographic stuff but these, now these I truly love! So pretty, ❤️❤️❤️

Enjoy watching you! They look awesome!🐾💚

BEAUTIFUL! Even the ones that have character are perfect!! Thank you for sharing 😊🤩

Simply beautiful and mystifying ❤ Thank you❣️

Magical! Super cute Julie 😍

This is beautiful!! And they turned out amazing!!!

Love the video's. My favorite resin artist. Aside from the amazing art your personality keeps em coming back.

Good job! Those are pretty!

Ty so much for sharing. I’m addicted to crafting 💁‍♀️

Gorgeous, love watching your experiments, so much fun🤩👏🏼

Very amazing magnificent colors. love ❤ the results.

Amazingly awesome. Great job on your first try.

So first of all, thanks for the short commercials! I have a few things to share with you. I like to use scotch clear tape to hold down my resin tape to the surface I am using. Really smooth surface works well. Also, I have double sided sticky beading mats that keep the tape from moving, no shifting or fingerprints. Works well. As for the flaws on you pendants, that just an excuse to attach something over the flaws;) I like to add one resin piece on top of another and I do it by putting a small amount of resin on the back of the piece to add.When dry, if there is any gap, I coat the whole piece with a smooth dome of clear resin and it fills and smooths it. Thanks for sharing your project!

Very pretty, turned out great. ♥️

I like the look with the natural light. These are really cool. I bet they will look awesome being worn with the light flashing over them.

Those are beautiful. They look much better with the natural light. Yes make some more when you have time.

Your so clever. That’s such a cool idea and write what a result 😍

I just saw this video and #1473. You are just amazing, Julie. I personally am so grateful for your willingness to share some of your processes. Have a blessed day.

They are great Julie. We’re all on a learning curve but they’ve turned out beautifully Well done

You did a great job, Thank you for sharing Julie. ❤❤

Thank you very much for the wonderful lesson.

Beautiful. Love the holographic jewelry. Love to see more with holographics.

That is so strange. Thank you for showing and teaching us all the tips about using such strange stuff. 😂They turned out really well-especially for your first time. Yes, yes, more of that holographic stuff please😁

This is amazing to me! How in the world does the holographic images get onto the silicone and then onto the resin? I absolutely love holo anything and I want to make everything holo now in one way or another!!

I really do love these! Thank you!

Thes are so pretty.But I think just placing them directly on the mar would save the sticking down part,then you won’t over flow.I think the mat is brilliant how it can give a nice shiny surface with rainbow colours on it ..Love these 🥰

I’m loving the process to make the holo silicone and the jewelry. I could definitely see the beautiful,holo effect. How gorgeous on that teardrop with the black cord, I’d glue a tiny rhinestone over that spot. 😊❤❤❤

Those are really beautiful! I've never seen that done before. It might be something I will have to try!

Love your resin ideas

Beautiful job done.

Oh my gosh. I loved watching this process. I was cheering too! Definitely subscribed!

Love your work! I’ve found when using the resin tape make sure the bezels are on a soft surface to seal them well. Also don’t let them stay too long after they set up.

Love to watch you create.

WOW!

They're all so cute 😍

Very pretty.

Love your work.

So super cool!

Beautiful! I will have to put Defraction paper on my bucket list.

So loving this.🥰😺

Gorgeous! great job

Absolutely gorgeous ❤️🤩❤️🤩

beautiful ! would love to see more jewelry

This is so interesting. Hope you do more projects.

I think it's a great idea. I would love to see more.

Awesome! Reminds me of a mood ring!

These are gorgeous right from you making the mold being so particular to making a little pendants are cool and I got to make matching earrings and sell them as a set or even bracelets

Fabulous!

I prefer your old camera angle. Just my preference. I love watching your creative pours. 😍

Gorgeous. I would have made a frame of cardboard around the pieces so I didn't have to cut the inlay sheet.

Love it!

They are cool! You could glue a few tiny rhinestones on the flawed parts.❤️

Gorgeous.

Puppies 🐶 are hungry...beautiful ending love those.

I know this is an older video but I'm kind of binge watching some of your stuff that I haven't seen yet. When it comes to that resin leakage, I just wanted to share that when making my resin tumblers, I just use an exacto knife and run it around the lip of my tumblers and it trims any excess down perfectly! That are super cute! I've bought a jewelry/pendant kit from Let's Resin and am having a blast playing with UV resin and they are turning out sooooo cute!

Beautiful.❤

Just beautiful 😍

P.S. After typing all this below,(And yes I know the PS shouldn't be on top) I now see this is: Pendants like with a big "P" and no one might care about the holo on the backs !! "My Bad" I have no idea how this escaped me.. worse yet my poor fingers ache!! so I'm still gonna post this if only because I put way too much time in typing this ...and it's 2:45 AM here Clearwater, Fla......and now I meekly say ... or type "I still think it's not entirely a bad idea" ...lol Wow what really beautiful and vibrant pieces !! You got me too thinking and brainstorming about ways to finish the backsides with a holo if indeed that's what you had in mind or not. Anyhow here's 2 ideas that comes to mind. 1st idea: Naturally would be adding an additional a ultra thin layer black or clear resin on the backs, then applying your holo silicone them. ( home run) !! Ah but then again this may not work because the layer of resin is too thin to allow a good holo transfer... So now onto Idea #2 how to get a thicker resin layer ! Is ... after you have attached the hoop to the green tape, you then flip it over and apply a VERY LOW heat, very carefully to the backside of tape, just enough to soften it ever so minutely, that it dimples inwards just a little so that when cooled it would still be dimpled inward (concave) towards the upside/topside of the hoop. Now fill in the upside/topside just like you originally did before with resin and apply the holo silicone etc. After it has cured and you pulled off the silicone holo, you flip it over and remove the the tape. You should now have a concave back surface thus allowing you to add a deeper layer of resin to fill in the back side, allowing you to have enough resin to get a good transfer of the silicone holo to the backside.! I hope this doesn't sound confusing/complicated, I don't think it would be hard at all. Also as an added benny it would be a better bond of the tape to the earring/less leakage. Luck of the Irish : would be the tape not staying concave ! ..Ah but one can only try.

Now I know what to do with my bezels!! Love them!

❤❤love them

I I’d love to see more

Love them

Art by me ,they look beautiful.

Juste magique thanks

the pendants is so expensive for me, am from MEXICO en I LOVE YOU ART. THANK S FOR SHARING

LOVE these, Julie! They're wonderful! ❤ You are so clever, the way you figure things out! I love the way your mind works! I don't know how this would affect your HOLO sheet, but...maybe you could place the bezels directly on the sheet (where the HOLO would transfer to the back and show through to the front)? Probably have to use translucent colorants for that, though. Hm. I know you'd have to press the bezels down into the sheet a wee bit. Do you think that would leave a permanent imprint and ruin the sheet? Boy...more questions than suggestions, huh?

I really love these!! I love everything you do. I've been following you and watching all of your videos for 3yrs now and I love everything you do and I love you how you do your videos. My suggestions for this video is that you could directly place the bezels onto the silicone sheet or instead of placing the sheet onto the resin, you could also just pick up the bezels on the tape and flip the entire tape with bezels over on top of the silicone sheet! Just a couple of suggestions, otherwise I really love these!! Oh one more thing before I forget, (I already almost forgot) lol; but anyways... the heart piece that over flowed; you can save it by taking a hand- held blade and peel it up off of the metal frame almost like you did on the sides with your fingers and if you couldn't really get it to cone out good, you can always just cover the back side with resin and fill in the loop on both sides and put a magnet on the back of wet resin, turning it into a beautiful refrigerator magnet!! There are usually other solutions to saving pieces you didn't originally intend making by turning it into something else that would be beautiful instead of just throwing it out!! 😉 love your work though; you make so many amazing things!! I just wish you could show us how you make all of your molds 😉 😉 Here soon; I will be joining the utube resin tutorial world and hope you will follow me and see my creations in the making as well!! 😉 If interested... keep an eye out for Craft Diva Treasures!! Love you resin college!!

Beautiful I Love

Beautiful. The one with the spot, I would make it a shallow hole and place a Swarovski crystal/rhinestone in the hole. Judy up the bling..

If you're careful, you can cover the imperfection on the gold teardrop with a semi precious stick on jewel. Something to add more interest to the shape, and design. As they are, simple is good if you can get away with it, but for tiny flubs like that, a smidge of embellishment goes a long way toward making it a keeper instead of a reject. 😉 These are all lovely! I think you could get away with resting these blanks on the silicone itself since it is so soft, it might resist bleed-through barring miniscule imperfections in the blanks. You just have to be careful how quickly you add the resin, keeping an eye out for any funny business.

An idea for the heart pendants. The fingerprint of a loved one in the sticky backing to be replicated in the final backing resin might be quite nice x

Live the holo💖👍

Great looking I didn't know you could get the sheets for halo or the tape I will be getting some soon thanks

Beautiful ❤️. I've seen others use a rolling pin to adhere the blank to the tape. That seemed to work.

Nice!

So beautiful! Do you have a video on making the holographic sheet? Also, a spinner clasp would work neatly for these as window hangers.

Yes show more

Divine 😃🥰🥰🥰

Next time just don't press on the silicone for the purpose of removing any trapped air bubbles. With the silicone covering the entire surface area it essentially creates a seal. With it being sealed, there is nowhere for any trapped air bubbles to go when you push on them, except for down into the resin. It wouldn't be a big enough air bubble to push the silicone up so it can slide out. 🙃 They turned out great 🙂

So clever, I cannot wait to try this too! Thank you so much for sharing your ideas and inspiration with us 💖

You did a great job. I’m struggling with my own hologram inlay. My mound frame leaked silicone.

Fascinating and beautiful. I was thinking that if, centuries ago, you wore one of these, people would definately think you dabbled in magic! I'll never understand how holographic things work but I'm mesmerized by the effect. Would it work with a lighter colour resin? Thank you for this tutorial. 🌈🖤👍😊

Lindos 💓 hermosos 😍

14:45 With all the tiny grooves in that silicone, I would think you'd never trap air bubbles. Air can still escape along all those little grooves.

They are amazing, just need to work out how to make the cabs with out the marks. Well done Julie, love the idea.

As usual, beautiful outcome!! Do you ever have something that you just won't show for one reason or another? I don't mind learning from mistakes!! Love the way you teach us no matter how it comes out. These are beautifully done 💓.. Could show us a video with just the holographic paper. I can't get it right! Love and prayers to you all 💗 🙏🙏🙏💯❤️❤️❤️❤️💯💯

Those that have marks just glue a small gem or a little metal rose to hide the marks I love them their great!