Тёмный

15 Tips That'll Improve Your Woodworking! Must Know Tricks and Techniques! 

Make Something
Подписаться 884 тыс.
Просмотров 310 тыс.
50% 1

My 15 favorite woodworking tips that'll save you time and money. Try 5 pairs of glasses at home for free at www.warbyparker.com/makesomet.... Home Try-Ons are only offered in the US.
★ TOOLS / SUPPLIES (affiliate links) ★
Drill Press: amzn.to/2VcnrtH
Forstner Bit Set: amzn.to/3eSGh39
Benchtop Bandsaw: amzn.to/2KYHzx9​
Wood Glue: amzn.to/3wQT90p
Jig Saw: amzn.to/398ZY3o
amzn.to/2Rq5BnV
Painter's Tape: amzn.to/2RixHSi
Iron: amzn.to/3wbtnmn
Table Saw: amzn.to/2E89suw
Hand Drill: amzn.to/3y66enf
0:00 Intro
0:12 Reinforcing Miter Joints
0:55 Fixing Miter Gaps
1:19 Jigsaw Trick
1:38 CA Glue Holddown
2:48 Iron On Wood Glue Veneer
3:48 Super Glue as Clamps
4:38 Filling Gaps with Sawdust
5:21 Perfect Segmented Pieces
6:10 Clean Tablesaw Crosscuts on Plywood
6:58 Clean Jigsaw Cuts on Plywood
7:27 Paying the Billz
9:01 Simple Straight Cutting Jig
10:21 Burning Edges? Let's fix that.
10:51 Painter's Tape as Clamps.
12: 01 Wedges as Clamps
13:19 Fixing Exposed Glue During Finishing
★ ALL THE LINKS ★
Patreon Support / Extra Content: / picciuto
T-Shirts / Books / Stickers / Plans: makesomething.com
★ FOLLOW ME ★
/ drunkenwood
/ makesomethingtv
/ makesomethingtv
David Picciuto
PO Box 2499
Toledo, OH 43606

Хобби

Опубликовано:

 

10 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 249   
@BRUCELAN168
@BRUCELAN168 3 года назад
I make my DIY Super glue activator with chlorine, baking soda and it works great! Thank you for your wonderful tricks, they are so helpful. 🙏🙏🙏
@sgsax
@sgsax 3 года назад
This was like opening a toolbox full of everything you need for the project. Great roundup of tips here, every one of them is golden. Right to the point, no filler. Thanks for sharing!
@birdlady2725
@birdlady2725 3 года назад
These are all practical help. Thank you for teaching us, who don't do this often. It makes projects feel a bit less intimidating.
@jiri4023
@jiri4023 3 года назад
This is probably the most practical set of tips I've seen on RU-vid so far. Thank you!!
@awlthatwoodworking9348
@awlthatwoodworking9348 3 года назад
Man if there is one woodworker that I hope succeeds and gets huge, it's you. I've been a fan for a while and the fact that you went from web design into woodworking is a great success story and gives me hope that as a software engineer I can let learn and grow in woodworking. For real, love your stuff, I have your band saw book and I don't even have a band saw yet I'm such a fan. Keep up the great work and thanks for sharing your knowledge and journey, it's cool to watch.
@inspiringbuilds
@inspiringbuilds 3 года назад
A tip I use are pocket holes for super strong 45 degree angles. My favorites used here are the straight line jig as it’s a must for lumber that doesn’t have one straight edge, CA glue between wood glue for a strong fast bond, and painters tape to minimize tear out. All works great! 👍🏼
@ChrisPowellFSD
@ChrisPowellFSD 3 года назад
I never would have imagined that you could use an iron and wood glue for veneers. That’s a great tip. I was really hoping to hear you say “you can never have too many people tell you you can never have too many clamps.” My girlfriends daughter says that every time I grab a clamp in the shop now thanks to you haha
@MakeSomething
@MakeSomething 3 года назад
hahaha! I love it!
@inspiringbuilds
@inspiringbuilds 3 года назад
Tons of action packed tips that actually work and I’ve used as a builder. Nice job! Keep up the great work as the goal is for us to continue to inspire others to build something awesome! 👍🏼
@jebowlin3879
@jebowlin3879 3 года назад
I like this, as a woodworker with little skill, and often little time to practice, videos like this are helpful, especially since I can come back to it over and over till I get these skills in reflex
@rockharvey5787
@rockharvey5787 3 года назад
I had no idea that wood glue could melt! Great tip!
@podstrahuy
@podstrahuy 3 года назад
It is. This knowledge also helps when you forgot to remove glue exceed on your piece and it got to the point of solid rock. You just take your orbital sander with some rough paper like 40, 60 or 80, make a quick touch (5-10 seconds) on the exceed to heat it up and then remove it with you chisel in a seconds.
@albertgodfrey5106
@albertgodfrey5106 3 года назад
@@podstrahuy no no
@podstrahuy
@podstrahuy 3 года назад
@@albertgodfrey5106 why why? I've made it few days ago and it worked perfectly
@indiolovato1116
@indiolovato1116 3 года назад
Pp9up
@skippercirelli2097
@skippercirelli2097 3 года назад
love you man. no BS approach to wood working. Well done.
@HansAndreasR1
@HansAndreasR1 3 года назад
i love this building of encyclopaedic-knowkledge, yes you give A LOT of tips in the video's but when you do not do woodworking every day, it's great to know these video's exist to come to when you have a problem! so,for a fan (of your channel) as i am, these are platinum since i know where to go with my question when i'm in need!
@glennryzebol4472
@glennryzebol4472 3 года назад
The veneer and iron trick is awesome. I have used shims/ wedges to glue up a few table tops as I didn`t have enough big clamps. It worked so much better than i imagined. I`ll have to try that trick for segmented pieces. Thanks for this. Awesome sauce as always!!
@Faustustopheles
@Faustustopheles 3 года назад
My wife and I finally went Kencraft in Toledo and mentioned that we watch your show. They were super nice and we left with a saw blade and a couple of pieces of cherry wood and spalted maple. Thank you for the recommendation, David. Wish we hadn't waited so long to check it out. Gus and Joyce (BG)
@MakeSomething
@MakeSomething 3 года назад
Awesome!! Thank you!!
@mymai2792
@mymai2792 2 года назад
Brilliant video...makes me feel more confident. Much appreciated.
@johnroth8275
@johnroth8275 3 года назад
So very helpful. Thanks. Now to remember all of them when the need arises.
@kubicekfamily
@kubicekfamily 3 года назад
I'm about to start a pallet furniture business, and I was glad you gave me these tips thanks!
@inspiringbuilds
@inspiringbuilds 3 года назад
It’s a hot business! With the high cost of lumber, pallet builds is a great option. Good luck, this tips will help for sure. Build something awesome. 👍🏼
@kubicekfamily
@kubicekfamily 3 года назад
@Inspiring Builds Thanks!
@jrive075
@jrive075 3 года назад
I’ve heard pallets have chemicals that are harmful so keep that in mind. I’m no expert but do the research furst
@DanielCShomo-wo5zh
@DanielCShomo-wo5zh 3 года назад
Some pallets also get irradiated.
@derekdodson5623
@derekdodson5623 3 года назад
Some new tips for me. Thanks, Dave.
@CosmicCharlie
@CosmicCharlie 3 года назад
Great set of tips thank you! My favorite was the using the screwdriver and wood glue on mitered corners!
@hrbekroenick
@hrbekroenick 3 года назад
Great tips! I found you, Bob and Jimmy separately. To find the 3 of you on the same podcast is incredible!
@amosluyk
@amosluyk 3 года назад
Awesome! I count four of these tips that will help with my project tomorrow :) Good stuff, just when I needed it. Thanks!
@andydudas2376
@andydudas2376 3 года назад
good, simple, and effective. This may or may not have been my nickname in high school
@ifscottcanyoucan
@ifscottcanyoucan 3 года назад
The CA glue sand-a-gap trick will come in handy. Thank you sir!
@AngieWilliamsDesigns
@AngieWilliamsDesigns 3 года назад
I have used or at least seen all these tips except the last one with the glue in your finish. All were super helpful.
@MCsCreations
@MCsCreations 3 года назад
Awesome tips, Dave! Thanks a lot! 😃 Tomorrow I'm going to cut my first push block with the jigsaw and I'm going to use the tape! 😃 Stay safe there with your family! 🖖😊
@lutheduck
@lutheduck 3 года назад
Most of these I did know (some you have previously mention trough your videos), but one about veneering is absolute mindblower :) thank you!
@gregmize01
@gregmize01 3 года назад
SWEET REVEREND IN THE BACKGROUND !!!!
@MakeSomething
@MakeSomething 3 года назад
Good eye! They are located here in Toledo!!
@clemmcguinness1087
@clemmcguinness1087 3 года назад
Love the sandpaper live edge method. Instant jig. Nice
@stevereinker4474
@stevereinker4474 3 года назад
Love this video. Saved for down the road. Enjoy your content!
@JGV_IX
@JGV_IX 3 года назад
Brilliant!!! Just starting out and you’re right - clamps are very expensive! Thanks for the tips - great video 😏 Warm regards and thanks from South Africa 🇿🇦
@robmills4709
@robmills4709 3 года назад
Really useful tips David, thank you.
@Ace345499
@Ace345499 3 года назад
Tape on corner of boxes, also helps when using splines to prevent tear out. Win win! Great vid
@joselrodriguez5999
@joselrodriguez5999 Год назад
I know is probably not too fun for you to do this kind of video (I listen to your podcast) but I appreciate it a lot. Some of those tricks were new to me despite my 40 yrs woodworking. Thanks!
@kevinetheridge6153
@kevinetheridge6153 3 года назад
Mostly normal stuff, but it's fun to watch anyway. I like the single screw in the two blocks clamping method around 13:15. Never thought of that. Cheers, David!
@sterlinghein
@sterlinghein 3 года назад
Thank you, some great tricks I haven’t seen before
@johnapp7826
@johnapp7826 2 года назад
Great tips. Try harbor freight for inexpensive clamps especially with the rubberized handle which are easy to tighten
@karl_alan
@karl_alan 3 года назад
Love this video. I use so many of these.
@russmartin4189
@russmartin4189 2 года назад
Great Tips! Recently,, I had to hold down some small blocks of wood to rout recesses in them. I had no awareness of the wedge method you show, but came up with exactly the same thing. I made rectangles out of scrap to fit the small wood blocks, but on two sides attached the scrap wood at an angle for the shims. Back in colonial days, and later, they didn't have our modern clamps. They made do with solutions such as using wedges. There is a video on RU-vid that shows how to make a jig for cutting shims on the table saw. Saved me a lot of money and trips to HD to buy them.
@terry3974
@terry3974 2 года назад
Thank you for this video. There were several tricks that I will use.
@lawdog516
@lawdog516 3 года назад
GREAT TIPS !!! Thanks
@TomMakeHere
@TomMakeHere 3 года назад
Awesome tips David! Thanks for sharing I'm a woodworker noob but slowly learning
@miketrent7976
@miketrent7976 3 года назад
The segmented piece glue up trick was worth the price of admission
@GetHandsDirty
@GetHandsDirty 3 года назад
Great tips and video! I don't know why I haven't got your second and third books yet, so I just ran to your website to grab them :D By the way, I am loving your studio even more with those colorful backgrounds. I noticed them a while ago but I don't think I commented on that yet. Super cool and give the videos a different and special vibe. Keep rocking David!
@usmanworks2616
@usmanworks2616 3 года назад
rare comment here
@ghsh837
@ghsh837 3 года назад
Very clever tricks, thanks for sharing
@LLOR
@LLOR 3 года назад
Great video! All these tips are useful!
@allanwilliams679
@allanwilliams679 3 года назад
Great stuff David. Thank you for sharing and for the ongoing content. I never miss a DP video... 👏🏻👏🏻👏🏻👏🏻👏🏻
@MakeSomething
@MakeSomething 3 года назад
🙏♥️
@mikesimmons7539
@mikesimmons7539 3 года назад
Thank you for all the tips you shared , they will be handy .You can teach an old dog new tricks . Thanks .
@JkCanvas
@JkCanvas 3 года назад
thank you for all the great tips. Learned about using sandpaper and super glue to fill small gaps and burnishing mitered corners.
@Joestacemazjojo
@Joestacemazjojo 2 года назад
Love the bourbon oil finish bottle!
@russmartin4189
@russmartin4189 2 года назад
I really like the veneer tip with regular wood glue. Genius!
@foos.998
@foos.998 3 года назад
Great video, Dave!
@tomwilson5822
@tomwilson5822 Год назад
Just discovered your videos. It was very good as a beginner. I thought I was the only one that thought clamps were over priced
@Flako-dd
@Flako-dd 3 года назад
Love the format, especially with the pacing and the time indexes! make a few and put em playlist :)
@davidmims6852
@davidmims6852 3 года назад
You rascal! That segmented bowl tip solved my problem completely!
@automaticprojects
@automaticprojects 3 года назад
Ooh, didn’t realize you had a third book out! The first two are definite favorites.
@kiyotomiyazaki1668
@kiyotomiyazaki1668 4 месяца назад
Thank you!
@nicroberts4779
@nicroberts4779 3 года назад
Thank you🙌🏻
@EduardoTorresDeMadera
@EduardoTorresDeMadera 3 года назад
Great package of tips, love them all.
@StrenkoB
@StrenkoB 2 года назад
Just found your channel today and I'm absolutely loving it.
@MakeSomething
@MakeSomething 2 года назад
Thank you!
@chiebert290
@chiebert290 2 года назад
Learned lots. Thanks 🙏
@thomashajicek2747
@thomashajicek2747 3 года назад
Great tips. Really like the one about gluing up halves of a segmented piece, but not sure how to glue up just one half. I've seem some videos claim painters tape to reduce tearout doesn't work. Clearly works on your examples!
@vinnyreid5442
@vinnyreid5442 3 года назад
Great tips David thanks for this video!!
@Bigfoot_With_Internet_Access
@Bigfoot_With_Internet_Access 3 года назад
Maybe I should start doing some woodworking out here in my forest
@inspiringbuilds
@inspiringbuilds 3 года назад
I agree. Lumber cost is currently high and if you have a forest that means free wood possibly. Build something awesome. 👍🏼
@derekjarman1638
@derekjarman1638 3 года назад
Great tips! Thanks👍👍
@glenstribling6123
@glenstribling6123 Год назад
These are great tips. I learned a lot. Thank you.
@TheWoodLab
@TheWoodLab 3 года назад
Great tips David! I’ve switched from double stick tape to the CA glue/blue tape when I first saw it some years back. I wanna hear more about the bourbon oil finish though! Lol
@jgriff19861947
@jgriff19861947 3 года назад
Lot's of great ideals will be very help full if I can remember all of them
@SilverFox-1212
@SilverFox-1212 2 года назад
If you had made your blocks and wedges taller you could have gotten better pressure at the top of your box for an even better hold. Thanks for the tips.
@merlinsatrom9142
@merlinsatrom9142 3 года назад
Great and helpful tips!
@davidwhitehead8625
@davidwhitehead8625 Год назад
this was great. many thanks!
@billdiehl156
@billdiehl156 3 года назад
Great tips!
@manuelbustos3776
@manuelbustos3776 3 года назад
Great video, thanks for sharing your your tricks and tips.
@earlbishop2314
@earlbishop2314 3 года назад
Just wanted to take a minute and thank you for all you do! I enjoy your videos and really appreciated when you've taken the time to reply to my emails when I had questions. I've purchased all your books but unfortunately, I don't have any signed copies.....Thanks again and stay safe and healthy!
@BDGilly1990
@BDGilly1990 3 года назад
Wedge clamp is my favorite.
@Sir_Pants_Alot
@Sir_Pants_Alot 3 года назад
I’ve done a lot of these myself. But I’m not gonna lie. That wood turners segmented trick was new and I face palmed hard when I realized I could have done that in the past. Great video. So casual but full of lots of great stuff. 👍
@stephencook4611
@stephencook4611 Год назад
Thanks for the tips
@pizzawarlord9232
@pizzawarlord9232 3 года назад
About to get into segment turning. Great tip, thanks
@richgarland6170
@richgarland6170 Год назад
Awesome 👏 Thank you so much
@hurley954
@hurley954 3 года назад
Oh I wanted a "Brule's Rules" play on woodworking so bad! Love your show even though I didn't get what I wanted ;)
@DReyn0
@DReyn0 Год назад
these are super solid
@stevenro872
@stevenro872 3 года назад
I thought I heard it all but first time for me to hear your top. even with your commercial it was good
@ericsimpson4045
@ericsimpson4045 3 года назад
Awesome video great tips, thanks!
@frankking1466
@frankking1466 3 года назад
I like your shirt, Best year ever! Diggin ur tips/tricks as well👍🏼👌🏼.
@billj5645
@billj5645 3 года назад
Great Tips!
@ForestWoodworks
@ForestWoodworks 3 года назад
Iron-on veneer tip...like, save (dedicated playlist), comment, do. Great tip, haven't seen that one yet. Thanks a bunch.
@PFWoodturning
@PFWoodturning 3 года назад
Awesome video! Thank you. I'm definitely going to grab the bandsaw book...I haven't attempted one yet!
@danielhiggs177
@danielhiggs177 3 года назад
The super glue trick...mind blown
@THORER282
@THORER282 Год назад
thanks for the super tips and super dynimic video..
@garagemonkeysan
@garagemonkeysan 3 года назад
Awesome film, great tips! Mahalo for sharing! : )
@mykhelderian
@mykhelderian 2 года назад
excellent tips. all are very useful. thx
@rickgordon8377
@rickgordon8377 3 года назад
Another great video I've learned from
@anthonylemanski9032
@anthonylemanski9032 3 года назад
The “ca” glue(did I say that right?) and sanding for the gaps is absolutely amazing thank you
@slavickskromul281
@slavickskromul281 2 года назад
Try CA glue but put baking soda in it, it makes a tooth like material, hard as a rock
@truesnuh4781
@truesnuh4781 3 года назад
Very good stuff, thank you! Nice jigsaw btw, I have the same one.
@MuhammadDaudkhanTV100
@MuhammadDaudkhanTV100 3 года назад
Amazing idea
@ArpadBuildsThis
@ArpadBuildsThis 3 года назад
These are really useful! I should start using these in my shop!
@inspiringbuilds
@inspiringbuilds 3 года назад
Absolutely, I can say as a builder they work!
@fireworxz
@fireworxz 2 года назад
Thanks
@plakor6133
@plakor6133 3 года назад
Good ones!
@steeleanderson1172
@steeleanderson1172 3 года назад
You're amazing David Potato 🥔
@tbirdlow266
@tbirdlow266 3 года назад
Merci !
@dandavis5832
@dandavis5832 3 года назад
Well done! Thanks for sharing Dave!! Pipe clamps are the cheapest choice when starting out IMHO. Just superglue a piece of 1"x1" scrap to the metal that contacts the wood to prevent damage.
@MakeSomething
@MakeSomething 3 года назад
Great tip!!
Далее
Cat Plays with Window Washer
00:22
Просмотров 1,8 млн
Alisha Lehmann joins Juventus Women 🤍🖤
00:16
Просмотров 2,5 млн
You Know That Wood You've Been Saving? Here You Go.
12:56
Why this simple jig is criminally underrated
13:15
Просмотров 102 тыс.
Every beginner needs to hear this
11:10
Просмотров 1,4 млн
Tips and Tricks Every Woodworker Should Know
12:18
Просмотров 1,3 млн
6 Easy Projects with Basic Woodworking Tools
29:10
Просмотров 147 тыс.
STOP Making Out-Dated Table Saw Sleds, Do This Instead
16:33
Genius Woodworking Tips & Hacks | Compilation
20:52
Просмотров 339 тыс.
10 Quick Woodworking Tips | Paul Sellers
8:22
Просмотров 998 тыс.
My Favourite 10 DIY Tips & Tricks
17:14
Просмотров 651 тыс.
ВЕЛОСИПЕД ЗАГОВОРИЛ
0:15
Просмотров 14 млн
The Cost of Calibers
0:58
Просмотров 19 млн