1938 Kustom Cadillac: Ian Roussel Shows The Use Of The Shrinker Stretcher Shrinker Stretcher 🤪

Подписаться 140 тыс.

Просмотров 53 тыс.

50% 1

1938 Kustom Cadillac: Ian Roussel Shows The Use Of The Shrinker Stretcher Shrinker Stretcher 🤪
Ian is continuing to work on this Cadillac for his client Victor. Ian has slowed down and is finding satisfaction in his art by revisiting the English wheel to make his own panels. The results of this one are going to Wow you. They Wow'ed Ian and Jamie.
Ian Roussel comes up with all kinds of ideas in his Full Custom Garage.
We Have MERCH! New SpacePort Merch is Here!
roussels-custo...
IF YOU ENJOYED THIS CONTENT 👽👽
🛸SUBSCRIBE
🛸LIKE
🛸COMMENT
🛸SHARE
🛸SET YOUR NOTIFICATIONS SO YOU DO NOT MISS ANY NEW CONTENT
If you are interested in the window frames or other metal castings feel free to reach out to Rick @ 209-704-2610 Support Artists!
Here are a few videos from Victor's showroom of art/cars that he and Ian collaborated on.
• Exploring his Insane C...
• Full Custom Ian Rousse...
• Full Custom Ian Rousse...
• Ian Roussel SEMA Show ...
Music:
Track: "Travolta Ponytail"
Music provided by slip.stream
Download / Stream: get.slip.strea...
Track: "Surf Rock"
Music provided by slip.stream
Download / Stream: get.slip.strea...
Follow Ian and Jamie on Instagram👽👽
@Full_Custom_Ian
@mrs_roussel_
Our Address📪
I.R. (For Large Packages 📦 Make It Out to Mojave Post Office #122)
PO Box 122
Mojave California 93502
We also have an Amazon store for you to shop some of the basics we use at our desert ranch!
www.amazon.com...
👩🏻‍🎨Follow Our Artist Who Created Our Hot Rod UFO Design on Instagram
@thechookyhand
👨🏻‍🎨Intro and Outro Animation Done By The One and Only
@corvette.mike on Instagram
Build: Ian Roussel
Filmed, Edited and Produced by Jamie Roussel
cadillac full custom garage classic cars California nia car show custom garage full custom garage ian roussel full custom garage season 1 full custom garage season 2 full custom garage season 3 full custom garage season 4 full custom garage season 5 full custom garage season 6 full custom garage season 7 full custom garage season 8 full custom garage season 9

Опубликовано:

20 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 242

@fullcustomIan День назад

Happy Saturday! Ian is hard at work finishing the metal fabrication on this caddy to get it out to the shop to Victor to take to the finish line! Don't forget to LIKE, COMMENT and SUBSCRIBE! We also have new merch! roussels-custom-fabrication.myshopify.com/. Get those orders in for the holidays! See you tomorrow! ~ The Roussel's

@davelawrence6777 2 дня назад

Just thought i needed to comment I'm an 81 year old guy who originally found you on cable. I know nothing about fabrication or design but found myself mesmerized by one your talents and two more importantly your and Jamie's personality's i was very pleased to find and join your utube channel. Thanks for your postings.

@inmyopinion6836 День назад

WELL said brother!

@mikecurrington5641 23 часа назад

Nice comment 👍

@tomtruesdale6901 2 дня назад

Ian is an artist in metal. That door piece is a piece of art.

@gregorysuddeth581 2 дня назад

Love watching the old ways of fabucareting .

@chucksayers5080 2 дня назад

Ian is DEFINITELY one of the most talented fabricator, sculpture and custom automotive creators in the business. HE TRULY LOVES WHAT HE CREATES. I am 79 years old going on 80.I have had hands on experience with automotive work but not even close to his caliber of PURE GENIUS. I catch every episode I possibly can. PLEASE KEEP UP THE EXCELLENT WORK. ❤❤❤😮

@inmyopinion6836 День назад

Yup! I heard my grandson use the words, "body God" .... LOL, I agree

@MrDonkybonk 2 дня назад

People used to make suits of armor shaping sheet metal, it’s amazing what you can build with a little imagination

@PetesCreativeRecycling 2 дня назад

The ol' Scratch Back the Fuzz with a Sawzall Technique!

@inmyopinion6836 День назад

I am a master woodworker, a bit, he is the ONLY other person I have seen do this. I will NEVER miss one of their posts! My human soul needs this ......

@jackbrown7895 День назад

I was late getting to watch Ian work his magic!!!😊😊😊😊

@elsdp-4560 2 дня назад

Thank you for sharing. 🛸👽👍

@johncooper534 2 дня назад

This is another one of my favorite builds that Ian is working on, I'm following this one from the beginning to the very end of his amazing craft, I don't want to miss any episodes

@inmyopinion6836 День назад

Not only YOU brother !!! 😉

@coolsville76 2 дня назад

JAMIE ROCKS WITH SOME GREAT MUSIC!! WHOO-HOO!

@inmyopinion6836 День назад

And the positioning is spot on!

@danieljanssen4580 2 дня назад

I love your sarcastic humor! Great work, I’m a model builder and use similar techniques but I never take myself too seriously which is just the way you seem….

@barnsy4602 2 дня назад

I’m not a fabricator but watching you do this is amazing to watch you make a and restore 🚙 cars Michael from Jamaica 🇯🇲

@geoffreyblake2765 День назад

It's absolutely amazing how Ian can fabricate all these compound shapes...while creating such beautiful outcomes ! IF i had the money, I'd call him and order my own "38 Cadillac Roadster"

@lowella598 День назад

Great SHOW! .excellent fabrication.

@coolsville76 2 дня назад

Thanks!! Great Video! Ya know... they keep getting better as y'all grow, move, and evolve. that's part of the fun in watching. Thanks again!! You Crazy Kids, today....

@floridian7143 2 дня назад

Thanks for sharing, always interesting!

@KayakCampingOffGrid 2 дня назад

ALWAYS an adventure watching the build progress... I never know how, when or why... It's just a matter of sitting back and watching it unfold 😅

@laurensmith1828 День назад

Nicely done , and a very clean transition into the fender. Thank you guys!

@abelardocastillo6683 2 дня назад

I was a mechanic most my life so I know what it takes to work with my hands, but u amaze me with what u do . Keep it up.

@MrSeptcarr День назад

The fabrication is moving in a great direction

@AceMcgee-q9f 2 дня назад

Ace McGee is in the house . This channel rocks Peace Love. There is strength in numbers everybody let's get out there and Rock the vote

@ericfallis6202 2 дня назад

Would also like to say that you 2 are an awesome team 😊

@jonathanroush6593 2 дня назад

Thanks!

@fullcustomIan 2 дня назад

Appreciate you watching!

@ZonDog 2 дня назад

That door is a test of patience and trial and error. WOW! Nice job again Ian! More trial than error.😊

@ellertorresiii1081 2 дня назад

You are truly, truly an amazing fabricator. Thank you for sharing your talent. Hello there Ms. Jamie

@NormDemik 2 дня назад

The continuing saga of Jamie and Ian, i simply love your show! its the highlight of my week ! ive seen everything you have out.. i think you and Bad Chad should do a build together. that would be epic!!!! Ian i wish i had your skills and knowledge and Jamie is wonderful .. talent with the editing and camera work...

@angelgarza8898 2 дня назад

Another great job from the hardworking Metal Magician you make it look so easy ,again Jamie great camera work , 😊

@greatnorthernrailwaytother4711 2 дня назад

Magic work Ian. Well done. Thanks Peter from downunder.

@SteveHorton-u3i 2 дня назад

Again awesome episode! Can't wait for the next one. You two are great together. Ian, your knowledge and skills never cease to amaze. Be blessed!

@fullcustomIan 2 дня назад

We're so glad you enjoy the show!

@TX-biker 2 дня назад

The banner looks fantastic. Camper may hide it later on, but we all know it’s there🤠

@crescentcoachworkscollecti378 2 дня назад

Fascinating! As a self taught amateur who keeps my and my friends rusty wrecks on the road by making these types of repairs in the rusty prone British climate . I find your videos unbelievably useful.

@boomerbassmeme 2 дня назад

Correction, not TV Magic, Jamie Magic! Love the editing and Kramps style music! Totally stealing his hammer bending trick! Always pick up a few tricks watching Ian! 😊👍🙏🙏

@doodledoo2u2 2 дня назад

Nice surf music !

@tomday7309 2 дня назад

Dang, I wouldn't have the patience you have Ian to weld a bunch of bits together and have it look "like factory". Great work and I'm anxious to see the final result.

@arnolau 2 дня назад

You DEFINITELY are the MOST CAUTIOUS AND PRECISE "METAL MAJICIAN FITTER" I watch and ENJOY !! WONDERFUL! ❤😂😮

@dougbutterfield1739 2 дня назад

Great job Ian, for some reason this was a real fun one to watch. I was fascinated to see the steps taken to working the door reconstruction. Only 80 deg, here in Yuma today Yay!!!

@matthewlatshaw1052 2 дня назад

Your channel is the best out of all custom car channel on audio quality when grinding and banging noises are so loud on other channels. Y'all keep them low so it doesn't blow out my ears

@jayford4685 День назад

Love it ! I use the same measurement method 2.5 hands x .5 a hand

@ronaldhackett7979 2 дня назад

Hi Ian and Jamie, I’m watching this episode now. I noticed today for the first time that when Ian was doing the Shrinking and Stretching I could see the metal movement. I never understood what was happening before but because Jamie was giving us a point of view shot I was able to actually see it move! You guys are Awesome I Love your Videos! 🔥🚗🤴🏻&👸🏻💯

@Obsidian_Mirror 2 дня назад

Jamie, you were mentioning about your downstairs when talking about seismic activity. I just remembered the name of the underground facility to look up: "Northrup RCS Tejon Ranch Underground"; there are people in the mountain town towards Mojave that claim there are frequencies emmitted from supposed underground testing. However, I would look up what time the town of Weedpatch has earthquakes each day and see if that correlates with the time you feel something; they have a lot and sometimes can be felt in a few counties....you can make a simple earthquake detector out of a lot of things; our local bar has long lights that hang from the ceiling and will shake when their is seismic activity

@waynehenderson7681 2 дня назад

Hey Buddy, ya just made my day. Finished my food, poured a glass of relax!.sat down to watch the box.Then it happened, da notification ding, Quick glance and (as mentioned) ya made my day .....talk about timing, WOW, THANKS AGAIN MATEY. Off with the box,up with the legs. ❤❤❤

@eziotaddeo1726 2 дня назад

Ian! I always 'stand tuned' for your next vids. Ian, Jamie hey!. Another awesome vid 'Mr Fabricator' The way you mould bend work that steel. Fantastic to watch, next please. Cheers

@40momba 2 дня назад

Good Morning Jamie & Ian, from the peoples republic of Illinois 👽 What a great way to start my day before headin out to the HOT-Shop to work. I still have a shrinker & stretcher from building parts for my 1940 Willy coupe. Love this channel & all you two do! George The GlassMan. 👽👽👽👽

@PainterDee 2 дня назад

The IL republic, that shits GOLD 🤣🤣 (i too am in the same IL shithole)

@40momba 2 дня назад

@@PainterDee Thank Comrade LOL Yep Im stuck here hope to escape soon! George The GlassMan !👽👽👽

@Hillbilly007-yd9gu День назад

Love watching you fab parts of cars.

@ClintHemphill-p8f 2 дня назад

Loving the caddy whacked build, check you tube every day hoping the next episode is there, keep up the awesome work

@unusualpodcast 2 дня назад

I love that part of hwy between Mojave and Tehacapi. Yellow caboose before the loop... Yeah.

@howardnielsen6220 2 дня назад

Good morning ian and Jamie Enjoy Your Day

@RightHandy13 День назад

Ian is an artist in metal, someday I need to drive one of the VW creations. They look so fun!

@Biggcasino 2 дня назад

First of all Jamie you are a rock star on the camera and the music and editing. Secondly Ian you are a genius, what ever the minds eye can see you can achieve. Love the RU-vid channel and no more suits to answer to. Just a couple doing what they want when they want. Love it, love it, love it! Keep on keeping on!

@fullcustomIan 2 дня назад

We're so glad you're enjoying the channel!

@myerstalesofappalachia 2 дня назад

Simple fab work is super fun to me

@kevinpatrick2250 2 дня назад

Well like most saw you on tv first . love your work i can not believe that model car manufacturers haven't come to you with a .deal

@donniebooth8478 День назад

Glad your back doing the stuff we like watching you do because we learn a lot about how to do our on fabrication

@tommoraga8318 2 дня назад

I’m amazed how you built those pieces from your knowledge!!

@robertmiller3381 2 дня назад

Good show today. Thank you.

@The.Real.Timmii 2 дня назад

I love a late night upload ;)

@MrT01582 2 дня назад

9.13 am here in the UK 🇬🇧 🙌

@CJ-xl5rh 2 дня назад

Nice to know you feel comfortable taking a sheet in your new digs

@inmyopinion6836 День назад

My brain is tired, the input of this MASTER course of common sense and a lifetime of experience is far more than I expected. Ian, your skills and mostly, character, make me love you two even more. ....... Seriously, thank you!

@troygoggans5495 2 дня назад

I was just wondering the steps it took to perfect the shrinker and stretcher devices. Someone really had a insight into the movement of metal. It is amazing to watch Ian determine the point to shrink or stretch to move a point.

@AriMakkonen-xi7om День назад

Ian! You are a master in metal work. And design! Real artist. Keep on with the good work. Ari// from Åland Islands/Finland

@StephenKlena 2 дня назад

Beautiful work ✅

@fullcustomIan 2 дня назад

Appreciate it!

@derrekjohnson777 2 дня назад

Shrinker,stretcher,brake and shear,the most used metal tools in my shop as well

@greatholidays 2 дня назад

Bom demais ver como vai evoluindo no passo a passo, show

@saltyyoda7642 2 дня назад

Awesome work as always, loving the dash the right way up!, I like how you jump from one vehicle to the next keeping it fresh and interesting. Cheers from Australia

@RichardGarcia-e5n День назад

First time I saw Ian I came across a DVD at Walmart and was instantly hooked. Thank you for the inspiration and influence in the automotive industry.

@fullcustomIan День назад

Thanks for the support, I really appreciate it!

@r.a.monigold9789 2 дня назад

Pre show comment - this is to prove that CJ-DJ and The Fab Man are so good that an advance comment will be as relevant as a post video post. Thank you both for sharing!!! BTW I’m watching this at 2:22 am Oregon time on Saturday 10/19/2034

@johnkinnane547 День назад

G’day Ian and Jani watching you fabricate that door jam is incredible how you are able to know in your mind how your going to do it when to me it just looks bits of metal and those pieces you have just tacked on will become beautifully finished off. It’s amazing how you go about it I’m 67 yo and have never seen a restoration like this and always wondered how it’s done, it just looks to me like rusted cut metal , I love watching you work it out it’s a pure art form anyway thank you for showing how you do it. Kind regards John

@stevensacks6869 2 дня назад

Meditative. That is good.

@user-lj1hi4xh6o 2 дня назад

One more thing done awesome

@MrT01582 2 дня назад

Good morning 🙏 from the UK 🇬🇧

@kirk3077 2 дня назад

🎉🎉❤ Brilliant 👏 👌

@jamesrankin9833 2 дня назад

Absolutely amazing! It was like watching it melt right into place!👌🏻LMAO😂😂 on the upside down dash! I think a lot of us were saying flip it, because of the contour of the bottom of the dash and the hood? But, there’s no way it would look as good as it does if you flip it! It looks Binga Banga!!👌🏻 Good stuff!!

@terryosz8458 2 дня назад

call it art very well done stay safe out there

@kevinhall2266 2 дня назад

You two are awesome. You make it look too easy, but that’s ok, I’ve got lots of tin to mess up on.

@br549200 2 дня назад

Hey from Missouri!

@MultiSmokers420 День назад

Jamie did a excellent job capturing the right angle to show how the shrinker and stretcher work!

@Robertunderwood-y5o 2 дня назад

been watching you for years seen you this is I feel your best build to date cant wait to see it SM

@donniebooth8478 День назад

You are the master metal bender this has been awesome watching you bend this door in to a perfect shape

@stevemayo1175 2 дня назад

Jamie I seen How you Swept the Trimmings Out of the Way while He was Shrinking and Stretching I Love how you 2 work as a TEAM and it is Very Important to Make Sure cut Off Sharp Stuff is Taken CAre of Immediately it would be Bad for 1 of the Dogs to Get some of that in it's Paw LOVE you Guy's

@royfrye2871 2 дня назад

Nice work, thats a tough one, 2 different bends in one and looks like it came off an assembly line or better, gap is on que!!$👍🔥😊

@seancarvalho8358 2 дня назад

Great video, thank you for taking all the time and effort putting these together, a lot of us enjoy and appreciate it. Please don't let the comments from the key board hero's get to you, they are the few... your fans are the many...

@MrTRIKE666 2 дня назад

You are a pleasure to watch and an inspiration to others. Keep up the amazing creations you do. I look forwards to watching every episode. From Jason pugh in south Wales in the UK LIVE THE DREAM BOTH AND ENJOY

@randymatheny8621 2 дня назад

Good music, as always

@fullcustomIan 2 дня назад

Thanks, it’s my go-to playlist

@edlinke2368 2 дня назад

with what u,ll got there i,m looking 4ward 2 the finished product i,ve seen your other cars so this should b just as great

@angelgarcia4328 День назад

THE CRUSHER !!!!

@vaughanspragg5776 2 дня назад

Cool man,🙂

@mikeschauger5498 День назад

I'm an old guy and watching that door fitment today(which was good) brought back memories of the days when I used to watch Boyd Coddington and he always insisted on using a paint stirring stick thickness to quage all of his body gaps. Memories.

@ronatworksitesolutions8193 День назад

So glad to hear you admit that the dashboard is upside down... even if you were being sarcastic. Lol. Keep up rhe good work. Loving it... Well most of it.

@Garnett-zg3gs 2 дня назад

Love watching your videos. A video was recommended to me For a video from HHwheels And I didn't know that you were one of the fabricators for a show called car warriors where you helped built the SkullClops Corvette apparently they found it and they're going to restore it small world.

@fullcustomIan 2 дня назад

Yes! They had it at SEMA last year

@RideforTheBrandskilledtrades День назад

It’s crazy seeing 3/4” thin-wall hanging out the caddy. Wireman electrician tradesman here, loving the build, and a super fan of the program.

@fullcustomIan День назад

Appreciate you watching, glad to have you onboard!

@dominosgarage День назад

Love the videos. WAY more personal and informative than when it was on TV. Keep it up!!

@ronbunker5778 День назад

Ian, you make it look easy! This is going to be a beauty!

@ericfallis6202 2 дня назад

Hi you 2 love the new shop and love the videos

@SuperOrbiter 2 дня назад

In order to create uniform gaps on a door, the closed door must be galvanized all around, then the door is cut out with a knife. After that, the gaps are perfectly uniform! This method was used in the 1960s when building the VW Beetle in Wolfsburg!

@donlandenberg8126 День назад

What an awesome way to finish out my day. Thanks for sharing with us.

@billweinholtz154 2 дня назад

Outstanding work today from both, the fabricator and the camera lady. My question today is have any of your friends such as Johnny jalopy, Tom or Don seen your new shop? Thanks guys