1954 Southbend Heavy 10L Lathe Revive

Подписаться 420 тыс.

Просмотров 20 тыс.

50% 1

In today's video we finally get our Southbend Heavy 10L lathe going. We have had this lathe for over 2 years now and it is awesome to finally use it. Huge shout out to Dave for helping get this thing going.
Tools & Products Used On This Video
3 Jaw Chuck - ebay.to/380PBxz
Live Center - amzn.to/3CYEUtz
5/8" Drill Chuck - amzn.to/3z42Vgj
1/2" Boring Bar - amzn.to/3D07QBq
Dial Indicator - amzn.to/3iZ33YT
Tool Post Set - amzn.to/2XBjz9j
Lathe Tool Set - amzn.to/3mgjqT2
Merch & Events - bit.ly/33YbmtO
Check Out Go Power Sports for all your Go kart needs! bit.ly/2viX9vP
Parts & Tools used on the channel - amazon.com/shop/redbeardsgarage
Quantum Machinery- Siegmund Welding Table - bit.ly/36PHm6G
- Nargesa CC60 Bender - bit.ly/2xWDVxj
Prime Weld Tig 225x - bit.ly/2EbSIqK
Prime Weld MIG180- bit.ly/2Q44l5V
Benchmark Abrasives (cut-off wheels, flap discs..) bit.ly/2SENg4f save 10% REDBEARD10
Tube Buddy Affiliate- www.Tubebuddy.com/RBG
Help support us on Patreon - patreon.com/redbeardsgarage
Want to donate without the commitment? - paypal.me/redbeardsgarage
Want to send us something?
Red Beard's Garage
P.O. Box 572
Sweetwater, TN 37874
Facebook - redbeardsgarage
Instagram - redbeardsgarage
TikTok - redbeardsgarage0
Pinterest - redbeardsgarage
Twitter - redbeardsgarage
Instrumentals by Chuki Beats - / chukibeats
-------------------------------------------------------------------------------------------------------------
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos. We are trained professionals. Red Beards Garage does not take any responsibility for injury's created by doing so.
#RBGKarts #RedBeardsGarage

Развлечения

Опубликовано:

22 авг 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 85

@tint661 2 года назад

I've been out of school for more years than I want to remember. We had lathe's like that in metal shop when i was a kid. I made a brass hammer, a clutch alignment tool with pilot bearing adapters, a brass alignment drift and an engine stand my senior year. I loved messing around with the lathe's.

@rondean2918 2 года назад

Hey bro, I didn’t read through all of the comments here but FYI, Those 3 sockethead cap screws on the back plate ARE NOT to adjust the chuck & that (adapter plate) has to be machined on the front two faces and the O.D. of the first step on the boss so it has a precise fit into the bore of the pocket on the rear of the chuck. That way the chuck mounting plate and the chuck run concentric with the headstocks axis of rotation& That’s the only way to get the chuck mounted on the plate flat. Congratulations on the acquisition but if it’s set up right you’ll have a more precise, enjoyable and rigid machine for your projects in the future

@michealfrench6488 2 года назад

I learned on a 1966 southbend lathe I wish I had it now. They're awesome

@jeffjohnson3912 2 года назад

It’s about time you got a lathe! That’s gonna take your builds to the next level and make things easier on you guys. Can’t wait for the vid!

@PaulThomas-qo9vy 2 года назад

Thank you Dave (master machinist) for helping RBG get that sweet lathe rock & rolling!

@rcclassiccrawlers4368 2 года назад

That’s really cool of you to showcase other people’s builds. Also congrats on the new equipment. That’s huge! Used lathe are hard to come by in my area at least. Enjoy, you’ll be making all kinds of things before long. Great video and keep up the great builds!

@RobertPerrigoOkiechopper 2 года назад

I'm very happy to see you finally getting a small machine shop up & going, you will benefit from it greatly. Now just get a good oil can for the oil cups.

@darrellnichter9894 2 года назад

Good shit.. I work at a school and have access after hours to all the shop equipment! I freaking love it!

@SurlyMike 2 года назад

That is awesome! A Bridgeport and a plasma table too? Bro your are moving on up! I can only dream of such things.

@mkuhlman77 2 года назад

Always great to learn something new.

@nickrudd2568 2 года назад

Game changer. Master that and make loads more bits.

@TheJimtodd 6 месяцев назад

Always oil the threads on the stub end to help get the chuck off

@diybuildsandrepairs 2 года назад

Me and my neighbor have been building crazy stuff but we are not good with filming or editing ill try to send you some pictures to show you we watch alot of your videos and get motivation to build different things thanks for the content

@trumpfancardanostakepool4737 2 года назад

Cool piece of effective old-school equipment.

@mikesbarn1858 2 года назад

This Old Tony will give you some tips and tricks while Ave might tell you great job or go do something to yourself.

@hswing11 2 года назад

Ya waste of time/money

@lloydbaker7099 2 года назад

Beautiful old machine I have a 2-year-old grizzly and I'm jealous of your South bend

@daniel202010 2 года назад

That's awesome bro. Get it done

@TyranisCustoms 2 года назад

BRO WE'RE LIKE LATHE TWINS 😍

@erwin5911 2 года назад

First thing to add is a coolant system. The catch basin is already there so we are talking a couple hundreds buck. It will pay for itself in extending tooling life, faster cutting speeds, cleaner finish cuts.

@YoLo-dc1uy 2 года назад

I’ve got a old old table top steel lathe and I’ve used that baby countless times. I’ve had several attempts at others trying to buy it. But I won’t let go of it

@kwatt-engineer796 2 года назад

I really like your channel it's a go to resource for how to build/design karts. I decided to take the plunge and build an off-road two seat kart. The hinged power package has a predator 212, TAV 30 with live axle and is nearing completion. I Settled on a frame width of 48 inches. The frame is 1/1/2 inch square tube for the bottom rails. All other tubes except for the wish bone sub-frame will be one inch schedule 30 structural tube The videos look like 48 inches is about right for a two seat Kart. I am making wood mock-ups of the kart before cutting metal for that section. Hubs will be 4 bolt golf cart style, front wheels on version 1.0 will be 8 inch golf kart. Rear wheels will be 10 inch with aggressive tread. The engine cradle is large enough for a future big block if the 212 is too puny for the job. Now for the punch line, I'm a 21 year old trapped in a 77 year old body. Incidentally, I have a 10 inch lathe and a Harbor Freight mill drill. They are invaluable assets for building. Wish I could justify the cost of a tube bender.

@sethmullet8014 2 года назад

Hopefully see you in Chicago! Just registered for Monday.

@brandonfloyd6321 2 года назад

We have a huge lathe that came from a local sawmill and it has a 4 speed truck transmission on it to have even more speeds. Lol

@darrylnicholson1640 2 года назад

Great old lathe one of the best.

@Jesse_Jessie_James 2 года назад

I have one like that and a cnc plasma cutter machine. It works great cause I do allot of welding and building trailers for customers. Trust me the pics that u had to send out to get machined u can do them on that. I do pasta for other people and they pay me good. I still work for the company I been working for a very very long time.

@bratwurstbuster 2 года назад

awesome...that will be a huge asset to your builds...

@DavidHerscher 2 года назад

So much... You can thread chucks directly onto the threads on that spindle. You should in fact, when you want the minimal possible runout. You stuck a brand new new back plate on that spindle, and then you DIDN'T machine it. Take a skim cut to square the back plate with the spindle. THEN mount your new chuck. Same for the old face plate and chuck. You could have fixed those just as easily. Nice freaking lathe btw. Congrats!

@thinkingimpaired5663 2 года назад

Looking forward to your video. I have a similar Southbend.

@alexwirtz3047 2 года назад

You could also make a rotary mill chuck out of that old 3 jaw chuck like rather b welding has for his mill. Super useful for round drilling patterns like on homemade wheel hubs or brake disks

@davidjessee7701 2 года назад

Grind hard.. makes some remarkable pieces....

@vettepicking 2 года назад

Take a skim cut on that new backing plate to get it super tru.

@sethmullet8014 2 года назад

Awesome to hear about getting a mill! If possible skip the phase converter and get a good VFD

@joshwhite6947 2 года назад

Dude. I been eyeing that lathe in the background, thinking when the **** is he gonna use that thing lmao. I constantly use my lathe making go kart parts. I’m vary happy for you brother.

@drummer57 2 года назад

You have a nice lathe enjoy it it will put out some good parts

@KowboyUSA 2 года назад

Every good boy deserves a decent lathe. If any of 'em don't want theirs they can give it to me.

@jasonrukgaber3077 2 года назад

I’d highly recommend using the power feed for all of your turning and facing.

@jimciancio9005 2 года назад

Awesome lather brother, had the same exact one in my old shop I worked at. It's probably a bushing or Journal headstock but if you keep them well oiled and clean you'll never have any problems with them. Idk when they changed over to roller bearings in the scope of time but we had a journal bearing and the shit was original and had barely a half thou of slop in the headstock, considering how much abuse and hours were on the thing when we got it??? REALLY couldn't complain at that time, but they were pretty massive bronze bushings from what I remember, hopefully you'll get lucky and have the upgraded version with bearings in the headstock. Good luck bro, and can't wait to see what your outcome is with the new toy! It's a definite must have, no doubt.

@markmckeachnie4484 2 года назад

I can’t wait to see the tracks …. It like being a kid at Christmas, I can’t wait till the day comes when everybody get there for the big race . I wonder if you could get Derek from VGG to build a kart lol he’s moving to Tenn. soon

@paulschultz2331 2 года назад

Tool post angle is wrong. Don’t run the indicator on the outside of the chuck as that is not an indicating surface. Get a test indicator and run it on the mating taper. This Old Tony is a great channel for people learning machining. I ran one of those in high school, ah memories.

@markmckeachnie4484 2 года назад

Lol seems like everyone else has a lathe , milling machine and a plasma table . Now you can really show your stuff . I know you’ll use it too . When Chris gets there in Oct. he can maybe show you a couple tricks too

@davidowen888 2 года назад

Any lathe I guess is a good addition 👍

@sebastiansmith2661 2 года назад

Damn do I miss machine class in high school

@TrulyUnfortunate 2 года назад

A tip: When trying to line up a part on an old ass lathe try wacking the top of the jaw on the high side with a chunk of brass. You may be surprised at how much run out you can remove by pushing the scroll around in the chuck using this method.

@TrulyUnfortunate 2 года назад

@@StansWorld Old chucks that are sprung would hardly be considered a precision tool. If it was you wouldnt have to wack the back side of the jaw to get it to line up. Personally I prefer a Buck Chuck but not very many shops want to ass up the money for them. I was a machinist for 30 years and made everything from oil field equipment to flight hardware for the NASA shuttle program. Trust me,there's nothing you can show me when it comes to machining.

@georgespangler1517 2 года назад

High speed steel tooling will solve your belt problem also

@jimciancio9005 2 года назад

Hey just FYI if you get sick of breaking the old leather belts. Measure it up length wise and run a GM or whatever Serp belt upside down on the flat, works amazingly and you'll never break one or slip the belt again.

@johnsmith-zs9jq 2 года назад

Those belts don't work on a Heavy 10. The belt MUST be spliced.

5 месяцев назад

Here is guessing that you will never use that taper attachment. I do not use mine either but I sleep better knowing it is out in the garage!

@Thatdamfishingguy 2 года назад

I would appreciate you showing 3 phase converter

@YoLo-dc1uy 2 года назад

I live in Manchester Tn and own Manchester speedway kart track. I’ve been following you. I build my own engines for my kart and my sons. I use the ducar 196 cc for my sons akra engine and the hf 212 for my outlaw modified engines. Which if fixing to put one of my outlaw engines on my bike instead of the stock 212 currently on it.

@trashtotransportations5857 2 года назад

Cool

@ihavenoclue1661 2 года назад

Also get a 4 jaw chuck there easier to center up

@edhavnfun 2 года назад

I'm sure you'll like the lathe. Red I have used your videos over the years and you have taught me a lot. Thanks. I got a question for you. I have a couple mini bikes MB 200 warriors, both front forks are bent. They don't produce them anymore I am told. Do you know where or what I can replace them with? Thanks for your help. Ed from Bama

@samwestoby140 2 года назад

That lathe is almost as old as me and like me still works

@georgespangler1517 2 года назад

A tip cut a piece of plywood to protect your ways when removing chuck,,

@1000186ful 2 года назад

I want one these old lathes

@gqp3215 2 года назад

Glad to here about bridgeport. Lathe and mill make anything out of metal. Need a bigger one. Thats too small. You could be a supplyer of machine parts. Electric

@quevicular 2 года назад

Sqeely beans at the start of the lathing process. I hope all you guys had your headphone volumes up high

@paulhopkins1905 2 года назад

I tried to turn metal on my wood lathe with hand held carbide tools. It didn't work out too well haha

@sef53591 2 года назад

On a 13 horsepower vanguard engine do you have to hook the kill switch to both coil grounds

@randytravis3998 2 года назад

my south bend lathe each ear is adjustable so you can adjust your stock center ,, must be yours is a 1 screw does all 3 at one time ?

@larrybreuer4495 2 года назад

👍👍❤️

@henryware9440 Год назад

What runout tolerance will the Heavy10 hold?

@mikesbarn1858 2 года назад

Send it to Hard Tool Rescue. He will rebuild it from the ground up. What’s the postage to Saskatchewan?

@rosemariemartin3554 9 месяцев назад

is the chuck 8"? beautiful lathe😊

@hankburton2043 2 года назад

Use a soda can for a shim

@georgespangler1517 2 года назад

Would do much better turning with high speed steel with the older lathes,, they don't have enough power and weight for carbide

@proteus6366 Год назад

Hello!I want to buy the same machine, but I'm in Europe and we have a metric system.Two questions, if possible: 1.Does this machine cut metric threads or only inch threads?2. Are his limbs in inches or millimeters? I am grateful in advance for the answer!Gleb

@munkysports 2 года назад

i have a 1942 wood lathe

@nicholascervone4734 2 года назад

Check out hand tool rescue when it comes to restoring old tools he's the man

@brianbloom1799 2 года назад

Hey guys I was just joking, Can you guys give me the name of the site you bought your chuck from, Thanks Brian

@munkysports 2 года назад

sweeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeet

@brianbloom1799 2 года назад

Come on guys one of you dropped it on the floor. Tell the truth looks like it hit a piece of steel LOL

@TrulyUnfortunate 2 года назад

That definitely shouldnt have been chattering on that first cut.

@gqp3215 2 года назад

Everybody is computer operated. Can pick up manual cheap

@satchelsieniewicz5824 2 года назад

omg that poor bearing is definitaly ruined :(

@rodswim492 2 года назад

You're putting that chuck on too tight. The first time you turn something on it, it will tighten enough on its own.

@TrulyUnfortunate 2 года назад

Hard material or not it shouldnt chatter like that.

@jonygomez2680 2 года назад

Hey can I have a go kart u guys don’t use I just bought a go kart in face book and it’s giving me problems

@hswing11 2 года назад

Why would anyone waste time and money to rebuild that old wreck. Metal lathes are made for precision work, this one can't hold the close tolerance 👎👎👎👎👎👎

@georgespangler1517 2 года назад

Your bearings are as bad as your Chuck,,