I know this is a long video, but I don't want folks to think you can just throw a battery in and it fires right up. It actually took a couple hours and I edited out a lot of the cranking over to get the video down to 20 minutes.
Good old 292 Ford V-8. Had one in my first car, a 58 Ford Custom 2dr sedan. Glad to see it run and run fairly smooth after sitting for so long. Thanks for your videos.
@@adamdesjarlais8183 - Ford needed the room on the machining/assembly lines for the new 90° (221, 260, 289) engines, which were much more powerful and much lighter. Still, the Y-blocks had an enviable reliability record. Oh, and all Y-blocks had mechanical mushroom-style lifters - too noisy for "modern" cars. Cheers!
Iraq Soldiers - for many hundreds of years things people have built for transportation have been referred to as "she". It's a term of endearment with a long and glorious tradition. Stop with the panty waisted SJW bullshit. I agree with Jay Dighsx - this truck is beautiful and she is indeed ready for action.
that was simply amazing and awesome to see you bring that good ole 292 y block back to life after a 35 year sleep and I must admit I'm even more amazed by the fact that it wasn't seized!its crazy to think I was only 7 years old when she ran last.wow.a little bit of maintenance on her and she will serve you well for many more years to come!ive been around these y blocks for a good number of years now and have come to love them a great deal.our 59 ford fairlane had a 292 it ran very good but she was tired so I swapped it out for a rebuilt 272 and its been a fantastic engine!your 292 sounds very good and I bet its got good horsepower and torque to boot!
I'll say one thing I sure enjoy listening to you and watching you work Jonathan seem like just a good old country boy that can make just about anything work
Well you did it again, perseverance pays off. Not a Big Ford Guy but Granddad sure loved them, He had late 40s Pickup truck Flat head V8 and a 49 2 door post Coupe for Grandma, both Flattys. Great effort real good result. Thank You D
I thought she was gonna need some more tinkering before she’d start. But start she did and once she did, she never looked back. Ole JW is and was and will be the Grand Champion Junk Whisperer for the foreseeable future. Nice old truck and excellent video, as always. 🥸👍🔧💥✅
I had a 59 ford truck I drove it for 300.000 miles it turned over the odometer 3 times while I owned it . It went thru 2 motors,3 transmissions and 5 rear end's I ended up running a 2.93 rear end for the interstate because I drove 200 plus miles a day between work and home . I loved that truck got it for 200 bucks .
I owned a 59 F 250 that I bought used in 68. I paid $400 for it and sold it in 89 for $750. Since it was a work truck, I had to declare capital gains and depreciation recapture on my tax return that year. It had 248,000 miles on it when I sold it, and was on its second engine. Still the original rear end and transmission, although the synchronizers were pretty well gone. I recall that it was hard to find used parts because so many were still on the road.
I'm glad to see I'm not the only one who repurposes soda bottles for funnels and other useful things.Modern trucks are so comfortable compared to what I learned to drive on. A 54 Dodge, step side, 4 speed, 1/2 ton. Good old trucks!
That engine hasn't been running for 35 somethin years that's just about my age wow great video it was nice to see you bring it back to life after so many years
gotta say fine job getting her started sounds great after sitting 35 years if the frame is any good you can repair or replace the rest thanks for taking the time to show us what you did
Wow, I thought the valves would be too sticky. Turns out it's just another cold natured Ford. Oh yeah, I'm with you on that cross over pipe. Every Ford Y block truck engine I've ever seen had them. Congrats on another good buy. I won't mention the fuel line on the exhaust. LOL
I bought a 1959 F-100 in 1972, for 200.00. It had the 223 cast iron 6 in it. drove it for 20 years and sold it in 1992 for 200.00. I done a valve job on it at 150,000 miles and a total overhaul at 250,000 miles, it had over 300,000 miles on it when I sold it. It was a good old truck! built Ford tough.
I'm currently resurrecting a 75 f100 with a 600 cyl that sat in a bar 25 years. This is literally the most exciting and suspenseful video I've seen all week.
I had a few of those old Ford trucks when I was Much younger! Mine were 1963/1964. And they had the same motors in some of them! They either came with that 292 y block 8 or a 223 straight 6. Mine with the 8s had that cross member pipe also. Love those old FOMOCO's of that era...Drove one of my 1963 F-100's out to Wisconsin from Michigan when I moved to Wisconsin in Oct.18th. 1993. When Clinton was the Brand new president at that time. 7/13/18 4.50 pm cst Happy Friday Everyone!!
That's one I would like to have. We're the same age and I've been a ford man all my life. I've got a 77 f150 if I had Jay Leno's money I'd have a ford pick up from every year. Another one of my favorites is the AA. Thank you again Jonathan.
Your videos are longer than the usual "start up" videos, but that extra length for additional camera shots and explanation includes your viewers in the process. It's more like we are in the yard with you and not just watching a video. I know I keep wanting to talk to the video to make suggestions or ask questions about the start up, not that I know enough to actually contribute to the process. Sometimes it's nice to just be out in the yard.
Nice sounds good . I had a 1960 4x4 with four speed that I plowed snow with and had a lot of fun with , had to put a bus heater on the passenger floor just to stay warm . It's fun to watch you get this old cars and trucks running again and this is pretty happy truck right about now I'd bet ....getting another chance to roll the road .
I love your videos I like how you rescue them and throw a battery in them and a bottle of fuel and make it run! Keeping it simple, not doing a bunch of things then trying to start it, like you said you can make anything do anything when you throw money at it.
Greetings from Australia, I liked the Yanmar/Cummins conversion on the excavator and I have done many similar engine swaps myself. I used to work on these Y block engines fitted in the Ford F series trucks they used to blow the tin head gaskets between the cylinders and to solve that i used to put a strand of copper wire in the indention of the gasket between the cylinders. Also the camshaft bearings used to turn and block off the hole feeding oil to the rocker arms hence no lubrication, the fix to that was to fit a tee piece in the oil pressure outlet on the left front of the block and run a 3/16 copper pipe up the front of the engine and down through the valley cover under the inlet manifold into an other tee then a pipe up past the push rod each side and join it into the overflow pipe of the rocker shaft, to control the oil flow I squeezed down the copper pipe with a clamp.
this is the kind of vehicle you would want back in the day, everything is simple,easy to work on, car runs healthy most of its life and not too many things in the engine bay giving you so much working room
It’s a good idea to try n get the block full of coolant to help the water pump seal, sometimes saves repair later, especially when they been sitting dry for soooo, long. Jus tryin to help, awesome sound, great vid” brought back magic memories, knew she’d start, they always do, from NZ.
292''s were notorious for cracked heads. probably because of the way the exhaust was routed . not a ton of power but that engine brought back memories of a simpler time. thanks for sharing. 60 lbs of oil pressure wow that's about unreal !!!!! bypass is probably stuck shut.
I was 16 when I drove a '59 Ford F-100 4x4 with the little V-8 235ci? 226ci? and 4speed from San Luis Obispo to Eugene on Sand Tires and back. Trip up I had a cabover camper on it and empty on the way back. Going down Grants Pass on I-5, I was praying to every God and Goddess I could think of -- Drum brakes all the way around, no sway bars, and big beach tires. Actually wasn't that bad... 2nd gear and 25mph from top to bottom, had to touch the brakes once.
If I recall correctly, the Y block came as a 272, 292 and 312. Since it had solid axles with leaf springs both front and rear, sway bars would serve no purpose. They were very stable, even in cross winds, although they rode like a truck.
I had a 64 Ford F100. 292 Y block, as my daily driver for years before moving back East. That was the last year of straight front axle F100 before the Twin I Beam of 1965. Drove my daughter to her grandparents in it one weekend. They could beat you but were all truck! I never thought 180 miles of driving could tire someone out. Earlier Y blocks were also available in 239 and 256 cubic inch configurations. There were also a variety of other sizes used strictly in truck and industrial applications.
It may had taken you some time. I like what you said. No money was put into this. Just your time and effort. What you are doing to me is what makes this country great. You have shared what we have lost with all the throw away products we create today. It would be awesome if a team of people with your talent. Get together, start from one end of this country and find all lost treasures in automobile. Maybe take an old factory and bring them back to life. That would bring so many different people together just because so many people have a history in so many types of cars and trucks..... Well, can I dream a little..... :)
This would be a nice engine to do a complete teardown and rebuild on as a project. It is a good feeling to be able to bring old machinery back to life!
boy when she finally fired she roared to life. no struggle. these old ford's never die. I bought my now daily driver f150 from a field where it sat for 12 years. busted off on the first try and I drove it home from there. can't best em
Nothing can beat oldschool American steel. Old Ford F-series motors will run forever no matter what happens to them. Just give them some love and you are good to go. A modern car, when there's some dust on a chip, you can basically throw away the entire car.....
Man when she went off she was a runner big time... it's strange for me to hear a Y block without dual exhaust though, the only two I've heard had duals on them. Dual exhaust REALLY make the Y-block sound like a beast, something to do with the firing order, I guess.
I bought a 74 Chevy Cheyenne with a 454 that had been sitting When I got it the engine sounded old and tired. After some basic TLC the engine woke up and the old truck is now a daily driver while my F150 sits in the garage. It's ugly but runs great and I really enjoy driving it. I've tried to figure out why I like it so much and I think I found my answer. It's what I call an Analog Experience. Anything can be fixed with common hand tools and there isn't a hint of modernized electronics or computer controlled crap on it anywhere,except for the new HEI dist. that I installed - points suck and it was an easy conversion. It's strong and reliable and the AC works. I towed a loaded tandem axle trailer 500 miles and the only thing that could stop it was a gas station. With a TH400 and 373 gears it averaged 5.5MPG or roughly 100 miles per tank. I've since swapped the carb, added headers and completed a gear change. it's up to 12MPG and I'm enjoying every mile. Just wish more people would give these old trucks a second chance.
If it starts and obviously didn't smoke really bad I would say rebuild the brakes and fix what will make it road ready safe and drive and enjoy it. Yeah it's a ol heap but she's still here and in one piece .Love the video and love the old Truck . I had a 59 Ford Short box bed. Took a corner to fast, 75 on a 30mph S curve. 351 Cleveland 4bl.out of a wrecked 72 Torin GT. Teenage farmboy with a lead foot= DISASTER
I never liked the idea of the crossover been up on top but you are right about the gearbox being in the way and an after thought from Ford I eventually put a set of headers on my 292 I never liked the idea of the upper radiator hose being that close to the crossover. Nice truck keep up the work not many of these old girls left on the road
Thanks for mentioning that it FINALLY kicked off after throwing a lil bit of Marvel’s Mystery Oil down the gullet. It’s a great help to these sludged up old cylinders. ATF works ok too if ya don’t mind a lil bit of 💨 smoke! But it’s a great time saver if there aren’t other problems internally.