Abandoned Farm Truck Rescued! 1970 Dodge Power Wagon! Will it Run?!? The War Wagon! W200 Sweptline

Подписаться 187 тыс.

Просмотров 216 тыс.

50% 1

I picked up this 1970 Dodge Power Wagon W200 from a farm estate sale recently. The previous owner said they parked it when the rear differential failed. It's got a 318 V8 with 2 barrel carburetor, 4 speed manual transmission, Dana 60 rear axle and PTO driven Braden winch! We think it was a retired Army unit. Lets see if we can get this old girl running for the first time since it was retired 37 years ago in 1984! The War Wagon has been SOLD! Thanks Bo!!! Thanks for watching everyone!
Check out our new and improved Mortske merch site!!
shop.spreadshi...
Tools we use:
Trouble light: amzn.to/33756kQ
Streamlight Pen Light: amzn.to/3gSe3qA
Zep45 Penetrating Oil: amzn.to/3taR64i
Marine tank: amzn.to/2S6oUmf
12V inline fuel pump: amzn.to/3eHOGVC
1/4NPT to 5/16" hose barb fitting: amzn.to/33qPSYp
5/16" rubber fuel line: amzn.to/2SsLNjZ
Hot Sauce bottle: amzn.to/3u96zmS
Loser switch: amzn.to/3xEuL2s
Milwaukee 3/8" cordless ratchet: amzn.to/3wsHW6a
Milwaukee 1/2" Impact: amzn.to/3xDpzMb
Milwaukee 3/8" stubby impact: amzn.to/3e61pT9
Tekton 3/8" SAE deep impact socket set: amzn.to/332CZDv
3/8" wobble extensions: amzn.to/3nANCXw
GearWrench spark plug socket set: amzn.to/3uutdG9
Smittybilt XRC12 Winch: amzn.to/3eGG2qx
10 Ton Snatch Block: amzn.to/3gO6voI
Ingersoll Rand air hammer: amzn.to/3e7ULLY
Barrina LED Shop Lights: amzn.to/3gWiHDR
Filming equipment we use:
GoPro Hero 8: amzn.to/2PHSU7m
Carrying case: amzn.to/2ScTqeh
Camera tripod: amzn.to/3gOyULd
Camera light: amzn.to/2PB2SHp
Handheld camera mount: amzn.to/2QJBWG3
External Microphone: amzn.to/3vzdENY
Suction cup mount: amzn.to/3vqC1Nw
Drop a line: mortskerepair@gmail.com
Ship us things:
PO Box 1
Gwinner, ND 58040
Instagram: / mortske_repair
Need some Mortske apparel?!? Click the link below!
www.teespring....
Sammich donations gladly accepted on Patreon :
www.patreon.co...
#PowerWagon #dodgeram #MortskeRepair #willitrun #318 #mullet #farmtruck #sweptline #dodgesweptline #smallblockmopar #318mopar #w200dodge #bradenwinch #ptowinch #abandoned #ranwhenparked #barnfind #patina #oldjunk #mechanic #rusty #rust #badgas #nobrakes #12volt #4WD

Опубликовано:

9 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,2 тыс.

@79tazman 3 года назад

Mopars are awesome and that Truck is really awesome I love those old Dodge Trucks

@donellmuniz590 3 года назад

Me too, I've had 3 '71s and a '64.

@wingdwolf56 3 года назад

Great reason to get up on Monday!!! I remember test driving a brand new ‘74 Power Wagon. Salesman said I couldn’t get it stuck. 10 minutes later we were buried up to the rockers!! I said “no thanks” and left him there!

@MortskeRepair 3 года назад

Bahaha that's great! Pics or it didn't happen!

@wingdwolf56 3 года назад

Uh....’74.... no cell phones and only tourists walked around with cameras!!

@MortskeRepair 3 года назад

@@wingdwolf56 Polaroid!!

@wingdwolf56 3 года назад

@@MortskeRepair Damn!! Too much 420 back then!!

@Bill-xc8le 3 года назад

Even on Memorial Day you come through Mortske!

@MortskeRepair 3 года назад

I knew you'd all be sitting around looking for some enterainment Bill!

@Bill-xc8le 3 года назад

@@MortskeRepair Actually it was a very busy weekend, not a whole lot of down time.

@altennent156 3 месяца назад

We had those in 71 for military police vehicles at camp Lejeune. Loved them!

@kellykonoske91 3 года назад

My Dad always called Chevy's a "Shove it or leave it" Haha! Todd the retired trucker.

@anonkiba 3 года назад

Old dodge power wagon is on my list of vehicles I would love to own.

@michaelsedway9703 3 года назад

I have a 64 that will be finished soon. She is for sale. Frame off restoration.

@lostkiwi2695 2 года назад

I quite like seeing the new ones that don’t run, as well as the victories. Most you tubers roll up on an old rig, and 10 minutes later they’re driving down the road - I’m calling shenanigans!

@MortskeRepair 2 года назад

Right!

@BRTowe Год назад

You'd be surprised how often they'll come right back to life. My daily driver had been given up on and sat for several years. It had a broken body ground wire. Hooked it up and it fired right up. Had I been making a video it wouldn't have been 10 minutes long. And then some of them fight you every step of the way.

@wyattblackwood3927 3 года назад

I've been working on cars and trucks a long time and I've never seen anyone break engines lose the way you do so you're obviously doing something right. Whenever I've worked on a locked up engine it was either rebuild it or scrap it. I think it's pretty cool how you just beat the s*** out of them until they run.

@MortskeRepair 3 года назад

Haha we do what we know best!

@WilliamSmith-gk6qk 2 года назад

Yep I think its awesome how you get some of cars running that sit for 40+years keep up the good work

@jojomorgan8556 8 месяцев назад

I once Broke an 8N Ford tractor motor loose by letting it roll off the back of the Trailer at 30mph and dropping the clutch PSA : Whatever you do don't do that! Don't get me wrong, It worked perfectly but, This is a very bad idea, I almost ran over myself because I flew forward far enough that I was sitting on the radiator cap... it's definitely one of those life flashing before your eyes moments..... I'm fairly sure that if the tractor hadn't started and been full throttle in high gear it would have been the end of me or at least close to it. because it wasn't just broke loose, but was actually running, I had to climb back into the seat and keep it from going into the ditch before I could even think about how close I came to running myself over with an antique Ford tractor.... I'm also sure I'd have been one of the people on that show " dumb ways to die " if it HAD gone wrong.

@RearEngineShop 3 года назад

Duff knew it wasn’t going to run. That’s why he needed a drink.

@jameslund221 3 года назад

Thanks for running the end for me, just kidding, lol.

@WatchWesWork 3 года назад

Whatever you do, don't buy a borescope. These videos will shrink down to 10 minutes...

@MortskeRepair 3 года назад

Haha I got a cheap one off Amazon and that thing sucks! It works ok in a fuel tank to check for rust but it's pathetic in an engine. And what fun would that be?!? Thanks for watching Wes!

@Ka9radio_Mobile9 3 года назад

Just Remember, If Wes can do it, you can do it! :-)

@MortskeRepair 3 года назад

@@Ka9radio_Mobile9 He has this thing I've only read about in coloring books. It's called "patience"

@josephcarson8787 3 года назад

He'd have to retire from RU-vid.🤣lol

@sprocket226 3 года назад

All right! Happy Memorial Day Mortske & Duff!

@MortskeRepair 3 года назад

You as well Sprocket!

@chrisackerley1842 3 года назад

In the late 80's, when I was in college at NAU in Flagstaff, my dad gave me a '73 Dodge long bed. It had the 318 in it. It was a great old truck, but that's the operative word: "old." It had only 15 years on it but that truck was OLD!!! Not surprising, I suppose, since it lived its life on a farm in Nebrasks. It was fun to go tearing around the desert in. I didn't have to worry about scratching the paint!

@Rosiesgrandad 3 года назад

A 1 hour 9 minute Mortske Repair video on a national holiday Monday? Hell yes. 🔥

@MortskeRepair 3 года назад

Murica!

@letsdothis9063 Год назад

I had the opportunity to buy pretty much this exact rig in highschool. It ran great. The front drive shaft was missing so I passed. It was only like $400, so I probably should have grabbed it. It would still be handy at my grandma's property.

@tomstarcevich1147 3 года назад

You make my back hurt when I watch you trying to unstuck those old engines but it's entertaining be careful with your back👍😊

@MortskeRepair 3 года назад

Yeah, I'll be paying for that later!

@ksokie63 3 года назад

Well you gave it a good shot. 👍Thanks for the video today. Have a great evening

@j.walker3498 3 года назад

i seen bunch of cars in this parking lot. They all had stickers on the window. Some slippery fella in a suit kept trying to sell me one, i just wanted to see if these abandoned cars would run. They did, amazing all of them had less than 100 miles. should have made a video.

@toddbankes445 3 года назад

I had a 70 W 200, 383 2bbl, with 4 speed, 4.10 gears. What a beast. I was the guy pulling Ford's n Chevy out of ditches. Wish I still had it

@_Dave_S 3 года назад

This reminds me of the D100 my brother had decades ago. He was taking dad for a ride to the local watering hole, when he made a left turn. Dad leaned on the passenger door, it promptly opened and he went tumbling out at about 20mph. Good times. 😂😂

@MortskeRepair 3 года назад

Bet that was a ride!

@donellmuniz590 3 года назад

Not for Dad!

@drewnelson6463 3 года назад

The ol girls had a rough life. Too bad it got ruined from something that would have been an easy fix. Good build project. Good video. Thanks mortske

@crackberrry1 2 года назад

Thank you for doing these videos, and trying even if the engine is stuck or bad in the cylinders. We the people, need your videos for our encouragement to get our yard art going. Thank you so much, I'd love to see some older oddball vehicles aswell.

@MortskeRepair 2 года назад

Hey, our pleasure!

@tonyfriend7413 3 года назад

I LOVE DODGE TRUCKS!! The 1982 Loverboy song.. Lovin Every Minute of it.

@MortskeRepair 3 года назад

Haha classic Loverboy!

@ruwithlee1970 3 года назад

Pretty bad when Duff Dog 🐕 doesn't even want to check it out!

@MortskeRepair 3 года назад

He's a good judge of cars!

@KameraShy 3 года назад

Dogs have great instincts. About people. About vehicles.

@deeharris9635 3 года назад

Nice looking Dodge truck. Couple of mud tires and your ready for the truck pulls. I like the truck.

@tfindley007 3 года назад

Really glad you took the head off and the rear end apart. I love to see them run but if not, the next best thing is to see why..!

@MortskeRepair 3 года назад

Yeah, I noticed in the comments I need to do that more!

@cleasonleasure4832 3 года назад

Drinking wabble pops and watching u, I’m enjoying this video.4 pops . Semi retired and watching mortske repair, life is good. I have a pair of fox bodies I’m working on. But today I gave my 11 Camaro ss a Italian tune up.

@shawncave8339 3 года назад

Not sure what shape it's in now. But I know where there's one like this. Wow.

@frankm8533 3 года назад

Absolutely love the Dodge trucks those years im actually kinda looking for one. O Puddin sent me 👊

@MortskeRepair 3 года назад

He's a good kid!

@FeArhsma21 3 года назад

Man that body is pretty clean for what it is, could be a really fun project!

@mattboswell5392 3 года назад

Briggs and Stratton did a study they were gaveling a lot of warranty claims and after doing some studies it was deemed that the media from cleaning/ blasting the spark plugs was getting into the cylinder.

@donellmuniz590 3 года назад

Gaveling? I think Autocorrect screwed ya, lol.

@MortskeRepair 3 года назад

I always wondered about that. I try blowing out as much as I can!

@wingdwolf56 3 года назад

Been sayin for years:”If you always do, what you always did; you always get what you always got!”

@MortskeRepair 3 года назад

Nailed it!

@anaz6706 3 года назад

I just revived one of these last summer. Same color 4wd as well. Bought it from the original owners grandson. I thought the green might mean forest service or BIA but as far as we know it was just civilian owned

@donellmuniz590 3 года назад

Even though I'm a Mopar guy, I think what ya got there is a parts truck, bud. Then again, the motor, the body, and both axles are shot. So ya got the trans, transfer case, and PTO stuff. And the glass.

@elonmust7470 3 года назад

4x4 trucks of that age are super cool!

@jeromebreeding3302 3 года назад

Even a whole case of samiches Could'nt save that one Mortske ! Oh well, you can't save em all, but you've still got a pretty good batting average !

@MortskeRepair 3 года назад

1 outta 5 ain't bad! Striking out on Mopars tho!

@robertpimpo4698 3 года назад

Great job making both those tool very ingenious of you

@MortskeRepair 3 года назад

Thanks 👍

@briansutton7764 3 года назад

It was a valiant effort. All my faith would have been lost with the lack of motor/engine oil. But I'm certainly not going to blame a guy for trying.

@nicknackdaddyack 3 года назад

Another great show! At least you show ALL the stuffs....not just the sunshine and flower parts!

@MortskeRepair 3 года назад

Would be a short show if that's all we showed!

@chuckstith838 3 года назад

Insanity: doing the same thing over and over and expecting a different result. Enjoy

@MortskeRepair 3 года назад

That's the phrase I was looking for! Thanks Chuck!

@ReverendPONT 3 года назад

We always said Mopar stood for moments of power are rare.

@THRASHMETALFUNRIFFS 3 года назад

Mass Objects Perform Already Radically

@walkersullivan6201 3 года назад

"farm truck" is just a nice way of saying twice as beat up.

@MortskeRepair 3 года назад

You got it!

@chuckstith838 3 года назад

Run until all the bailing wire is out and on one cylinder then gently parked next to the last one

@peteloomis8456 3 года назад

I had a 68 ex Air force W200 power wagon crew cab sweptline that still had the 17-1/2 inch rims on it 318 4spd divorced gear drive transfer case with Dana 60s with 4:10 with a locker in the rear with the HD 12 inch clutch that was hydraulic that was one of the best trucks I ever had that I drove every day for many years . I went to put new U joints in it when I bought it & found out the military U joints were about 4 times the size as a regular civilian W200 uses . It had grease zirks in all of the leaf spring bushings instead of rubber & everything had drains on it to drain any water out of the drive train after fording through water . One thing I also liked about these trucks is that hood will fold back far enough that you can pull the engine out without having to pull the hood off like other trucks . I bought mine back in the early 90s for 1000 bucks & drove it home & it ran & drove good other than the old flat spotted tires on it which I swapped out for Ford 3/4 wheels & 35 inch BFG mud terrains . The engine ran great except the power sucked so I put a 340 cam in it & a Edelbrock performer aluminum intake with the Edelbrock 600 CFM carburetor jetted for performance with the Mopar performance electronic ignition & it was like night & day on performance & not bad fuel mileage as long as you stayed out of the 4 barrels . Whish I had it still because they go for big bucks now & I looked up the numbers of them made & it was less than 2,000 if I remember for the 68 military models .

@MortskeRepair 3 года назад

Sounds like a great rig!

@peteloomis8456 3 года назад

@@MortskeRepair Yeah they don't make trucks like those anymore . Everything made now is made to fail prematurely & is over priced junk in my opinion because of a throw away society . Last winter when I had - 27 below temps in Wisconsin my 2009 Chevrolet Silverado wouldn't start even though it has a new starter & battery because the battery froze & went partially dead . Where the battery sits & it's mount is small so I can't even fit a larger battery in it if I wanted because of the way GM designed it which sucks but the funny thing is while I put the charger on it I decided to see if my 82 K10 plow truck would start that I put a 400 SBC in it 3 going on 4 years ago & it started after pumping the heck out of the Edelbrock carburetor on it even with 10w - 30 oil in the engine non synthetic & no block heater so these new fangled trucks to me just aren't worth anything close to what the stealerships want lol .

@MortskeRepair 3 года назад

@@peteloomis8456 They were built to last!

@donellmuniz590 3 года назад

Cheese n rice. Son of a biscuit. What the French. Way to keep it family friendly, bud.

@MortskeRepair 3 года назад

we do our best...

@patrickwilson5765 3 года назад

@@MortskeRepair I drive a 2005 Chevy trailblazer LS 4 wheel drive and I have a Sundown 18 inch sub and a Nemesis 3000 watt class d mononlock 1 ohm stable amp and a custom made box for the sub and it pounds my trailblazer

@ronaldsweet562 3 года назад

I lean more watching a "learning exp" than I do from a perfect but staged success

@MortskeRepair 3 года назад

That's how we learn!

@cleasonleasure4832 3 года назад

Zep must be a western thing never heard about zep until I moved to Texas.

@sylvainleseur1072 2 года назад

Thanks to share.

@neckbonejones1097 3 года назад

Many Odd Parts Arranged Ridiculously

@THRASHMETALFUNRIFFS 3 года назад

Most Oddballs Pursue Asinine Rides?

@77yogurt 3 года назад

Mostly old parts and rust. Massively overpowered and respected. I can't remember any more of them.

@MortskeRepair 3 года назад

Haha good stuff!

@texjake3 3 года назад

I'm just here for the expert stuck valve comments. LOL!!!

@MortskeRepair 3 года назад

Fire and hammers, all you need!

@AdmiralVeers85 3 года назад

Oh no! You'll scratch the paint on the roof sliding the hood like that!

@velixzeen 3 года назад

one patina, two patina, three patina, four

@MortskeRepair 3 года назад

Fake patina!

@dasjuggernaut1 3 года назад

Moments Of Power Are Rare

@THRASHMETALFUNRIFFS 3 года назад

Momentarily Occurrence Proudly Arranged Ridiculously

@stevenpdxedu 3 года назад

What would I have done? After the first valve cover . . . find a 318 with oil in it? Wow, if the truck had any other redeeming qualities but it's beat to bat excrement. Might make a good hay wane.

@larrybair8074 2 года назад

We drove these Power wagons when I was in the Air Force, 1967-1973. The guys just tore them up. One came back with the cabin torn off

@keithharden7844 3 года назад

I’ve been driving my 2004 Trailblazer front wheel only. Diff broke the spider gears and I’m to cheap to fix it.

@MortskeRepair 3 года назад

Like a ticking time bomb!

@keithharden7844 3 года назад

@@MortskeRepair yes. Now the front has an issue.

@MortskeRepair 3 года назад

@@keithharden7844 Who woulda guessed!

@basedWisco715 3 года назад

Idk about anyone else, but I like the learning experiences. Seems more honest that way

@MortskeRepair 3 года назад

Not hiding nothin here!

@jesterr7133 3 года назад

Lol. I started giggling as soon as I saw the flexie hose. It's never a good sign when you see a flexie hose, especially on a Mopar.

@donellmuniz590 3 года назад

Why?

@williamarnett9064 2 года назад

Huh? That makes no sense

@nn9ula 3 года назад

Ooo yes finish my work come home and here we go love it 😄😄

@TheRedneckBudha 3 года назад

Not gonna lie saw the thumbnail as was like "I want that truck" been looking for a 70s power wagon for years now but dodge doesn't seem to be that popular in this part of idaho

@MortskeRepair 3 года назад

They're cool rigs! Pretty rare in these parts too!

@harmless1106 3 года назад

The ol slip and punch is a classic, a cold day really sets it off to.

@aaronblair9583 3 года назад

Ahh yes. I remember when roadkill was good..

@orasummers5982 3 года назад

Just got my A-Purvis blade today, Amazing quality, thanks for the tip!

@MortskeRepair 3 года назад

Heck yeah they are!! I'd be lost without mine!

@jeffreyharrington3982 3 года назад

When I was in high school auto-shop in late 1970's we used to joke that "Mopar is a Tow-Car".....

@markwhitfield5412 3 года назад

groundhog day comes to mind....i have faith...

@fredtate6795 3 года назад

It’s a dodge only takes a six pack.

@nainoswad2725 3 года назад

DODGE...' Duff Obviously Didn't Get Excited ' Like to see Puddins mitts trying to turn this stubborn mother.... Brandy & Bailey's... sipping here,this knocks Netflix out the game... thanks again. Ian.

@MortskeRepair 3 года назад

Haha nailed it!!

@jerryhelton7383 3 года назад

Lost count on how many times I screamed "pull the freaking head" video would been 10 min long if you would pulled the head!!!!!

@MortskeRepair 3 года назад

yeah I try to avoid tearing in that deep if I can

@jerryhelton7383 3 года назад

@@MortskeRepair I know just had a feeling the block was junk!!! Better luck next time

@lochnessfox3441 3 года назад

Thanks mortske! Mopar means!!! mostly old parts and rust!!! And another one for ford I will email you. Me being a fordanatic I’ve heard about all of them. GMC means!! Gotta mechanic coming!!

@GEROW1963 3 года назад

Great Mountain Climber. GMC

@fff-cf4fx 3 года назад

Man that green would come back and juuust the right amount of paint thinning on top. Has a great look

@MortskeRepair 3 года назад

Sure does!

@blackmask2057 3 года назад

Just got a 67 Ford f100 off the road since 81 , gonna give it the old mortske try!

@MortskeRepair 3 года назад

Good luck!

@garycook2355 3 года назад

the only one I have heard is "More Old Parts And Rust" But then I am a fan of "First On Race Day" and have proved that in racing.

@waiting4aliens 3 года назад

Good hint on pulling the valve covers, thank you

@DavidGragg82 3 года назад

Hope you and Duff dog had a good memorial day weekend Mortske.

@MortskeRepair 3 года назад

We did! You as well David!

@bmandiego 3 года назад

You should totally come to California and buy a car from the desert. You'd have a blast. Maybe a pay a little more than $500. But you'd have a rust free experience. These cars you find up there are scary.

@user-dk2lc6ez2v 2 месяца назад

You were being industrious. 😊

@CARSON441 2 года назад

Dodge's "Made to be worked on." NOT the slogan to go with to sell trucks, but accurate. Although it may have won them a truth in advertising award!

@eliembree4637 3 года назад

Morning Duffske!

@mikeb988 3 года назад

Me and my buddy jumped on a ten foot pole to get a windser free it ran good didn't even smoke

@stucook8622 3 года назад

Thanks again for the Mortske Monday! Its a cool old beast but Duff doesn't seem to be thrilled. Good luck🐾

@thumbzhenry4664 3 года назад

We need a pto winch lesson from ol’ uncle mortske!

@MortskeRepair 3 года назад

Oh man, I'd have to learn them myself!

@michaeldufresne9280 3 года назад

That’s too bad Mortske.... I kept waiting for that thing to break loose, but dang it wasn’t going to do it. Carry-on I will be waiting for the next one.

@munched55 2 года назад

Yeah, I'm looking at the older posts now and every time you have said, "More useless info for ya..." it's always something I didn't know. Soooo... keep 'em coming, Mortske.🤯 😉

@munched55 2 года назад

And I should add that I'm 66 and been busting knuckles on this veteran car world for over 50 years. (Except for a 10 year break for the military.)

@MortskeRepair 2 года назад

Right on

@davidwebb7624 Год назад

Ty for these videos I enjoy watching them

@MortskeRepair Год назад

Glad you enjoy them David!

@newrealm9187 3 года назад

I had an 80 army Chevy with a Dana 60. Crazy tough truck with a 305😂

@MortskeRepair 3 года назад

305 torque monster needs that big Dana!

@robbymyhan986 Год назад

Another Snap-on tool. The red prybar. 👍

@robbymyhan986 Год назад

Ever plan on coming south as in Alabama with any of your u-tube work.

@Pancreaticdefect 3 года назад

Nice to see you're enjoying the 4.5 days of warm weather you get up there every year.

@MortskeRepair 3 года назад

The skeeters are horrible now!

@MickelsonRacingChannel 3 года назад

Flex hose for the win!

@MortskeRepair 3 года назад

#Winning!

@cdbb6157 3 года назад

I really like these videos. It's cool to see where that line is between a long shot revival and an engine that is just bricked.

@MortskeRepair 3 года назад

Bricked, I like that!

@billyhinton9155 3 года назад

Look's like a 318. I was a mopar nut back in the 60's I loved it, very fast car,s I was stop in my mom's car running 160mpa by the cop's....

@grantkoeller8911 3 года назад

EMA truck, from the Department of Public Safety, They were the overseer of Emergency Management Agency, who coordinated the activities to mitigate, prepare for, respond to and recover from disasters, both natural and man-made.

@MortskeRepair 3 года назад

Ahh never heard of that one.

@philipchandler330 3 года назад

great analysis

@MortskeRepair 3 года назад

Thanks Philip!

@79tazman 3 года назад

You should take those rocker shafts off slowly so you don't bend the shaft you gotta release the pressure slowly one by one because they are bendable I have never had it happen to me but I have heard of it happening and they go on a certain way if you put them on backwards the rockers won't get any oil to them

@MortskeRepair 3 года назад

Makes sense, never heard of that but I can see that happening, maybe.

@bigpappahemi4263 10 месяцев назад

I am an expert but I defer to Mortske's judgement!

@robertbiggs4934 3 года назад

Thanks for the effort Mortske! Not sure even a lug nut is roadworthy on this one!

@miltonbayne6649 3 года назад

Started the vid this morning, I'm getting ready to hit the hay now. I will finish, tomorrow or the next day? Something to look forward to, I think. Wish we lived closer, I'd love to be your tool guy just to learn. Then I could come home and revive my riding 68 C20. Had her for 12 years now and the past 5 have been riding in my driveway. Started collecting parts to do her right again but my Wife's health issues take all my spare time right now. Damn, to much info MILT. Anyway, keep putting um out and I will keep watching. Thanks.

@kengibson402 3 года назад

I like how you swapped out the old tv in the shop!

@MortskeRepair 3 года назад

Upgrade!

@iamrichrocker 3 года назад

Dude..new sub here..i love a smart ass jokester who is smart...

@MortskeRepair 3 года назад

Thanks for the sub! Haha, nobody ever called me smart!

@RGGarage 3 года назад

We are all a bunch of oddballs. 👍👍✌️✌️

@MortskeRepair 3 года назад

Dang right we are!

@TheAdambright 2 года назад

These cars are amazing when we consider 2litres + to be a “big” motor in the U.K.

@ronniesanders1855 3 года назад

Hell of a try

@miketrimm3914 2 года назад

Top tools of all time for beginner mechanics , vice grips, crescent wrench,channel locks and harbor freight jack handles.l have a big drawer in my tool box full of 1.25 ton harbor freight jack parts.Hard not to buy them at only 60 bucks on sale. ln 1994 l bought the last USA made Lincoln 2 ton jack at Herk's Auto Parts in Pontiac Michigan for 300 bucks , doesn't leak down and works perfectly only problem is it gets harder and harder to drag around the shop as l get older and weaker!, Only auto part better than flex radiator hose is flex exhaust pipe!

@MortskeRepair 2 года назад

They don’t make em like they used to.

@carloschavez5368 3 года назад

Thats my type of project truck I would like to get so I can retrofit to a little more modern running gear and a 5.9 Cummins especially with a pto winch, that will be a sweet ride when finished.