1965 Mustang Update! 

If you have the means and a place to store it, hang on to your first car. Trust me, later on in life you'll be searching high and low for it or one just like it. Happens to all car guys sooner or later. Good to see you back.

He lives!

Duuuuude!!!! About time you put out a new video! Glad to see ya back at it!!!

It wasn't all that long ago that I was your age and cars like that could be bought for about $500. Well, I'm 55 now (Today as a matter of fact) and my advise to you is KEEP THAT CAR! It will be worth a ton of money later in your life. Nice ride!

Glad to see you're still out there working on the stang. Whatever you do going forward, don't sell that car. Keep it while you're working on the new project. Older you will thank younger you.

My dad passed away last year and I rolled the 64.5 mustang out to restore it. Hasn’t run in 35 years and I got it running and driving! Replaced whole fuel system carb and rear end

Ben, we always appreciate your videos! Thanks for putting one up for us. The Stang is looking good!

Glad to see 4 Speed Films back!

In the middle of a v8 swap with my 64.5 coupe… videos of your car keep me motivated!

It’s so good to see another video Ben. Been wondering how the Mustang has been

Thanks for finally reviewing the EFI after a year.

I personally would give it a paintjob, the way it looks , gives it a very specific character!

Really got excited when I got the notification that you were back with a new video. Nice to hear you still have the Mustang and it's doing well and your still enjoying it. From the outro of the video I'm not sure if we'll see see you soon or not. I hope it's soon. Miss seeing and hearing about your life, your dad and grandpa's antics. You also brought us to some great car shows that we all miss. Hope to see you back again soon.

Watched all your videos, good work. Back in 1975 my first car was 65 Mustang, notch-back similar to yours (paid only $250... lawn mowing earnings). As a dirt-bike riding teenager with a heavy-petal-foot... I quickly blew-out the main-bearing of the tired-old...leaky 298. The first owner was a US military pilot (like I later became)... so 2 lead-foots drove that engine into the ground. In 1975 I put a "new" 302 Mercury Cruiser boat engine which was still on the factory skid... but salvaged/ damaged in transit... only $300 new... long story... I digress. Hence, I like your videos. I like the wheels on your 65 (those are correct, approved in my book). Love all the sleeper-mods work you have done to it. Request; would love to see you do a low-budget paint job the 65 in a similar green... in a matt/satin finish. I found your color on a different car... Google these words... " Stone Green Pearl Metal Satin ". I think that's the right "hue" you have now... and it works. Again... just a working-man's affordable paint job.

Glad to see you and the Mustang back in business Ben.

Good to see a new video from you Ben. Your videos got me into american cars. Just got myself a old pontiac. Greetings from Denmark

Great to see a new video from you Ben. Now you have the stang dialled in just drive it and enjoy the fruits of your labour. Would be a shame to sell it being your first car, you may regret it one day🤔

Thanks for the update. Your Mustang sounds great! Don't give up on her, it's a great build with plenty more to go.

I've loved your videos from day 1, and you make it look like so much fun to do the old school "Hot Rodding" again. Thanks for sharing!

Although not my first car, I still own my 93 Calypso notchback I bought in 1995 right after college. was 10K then, 35k miles on it. been through a lot, now setup for oepn track with a Griggs Racing and Maximum Motorsports stuff and a nice 331. it's been through a lot, as have I. I'm glad I kept it, strange how attached we get to things as well as people(and pets!). I vote keep it if you can. If you cannot, the memories will grow sweeter with time. you will be able to move to something else but you wont replace it.

My son had a supercharged NSX and he went through three complete suspension setups before he finally was happy. The second one even had a switch panel in the glove box to adjust the ride on the fly. Glad to see you back.

glad you haven’t sold it yet like all these other youtube channels. Love the stang!

The car looks and sounds great, you're back from a much needed break, and you say there might be a new project? Let's go!!!

I put an ACE’s killshot efi on my sons ‘67 mustang 289 and it made a night and day diffrence…were currently building an aluminum headed roller cam 302 to replace the tired 289 in his car….beauty of it is we can simply swap over the efi from the 289 to the 302 when its time to do the swap….until then were gonna run that 200hp 289 into the dirt!!!

Good to have you back dude!

This is cool to see an LB based company. I have a 69 Mach 1 and I live in Bixby Knolls in LB, so I need to go see these guys. Hey I've been going to Mustang Country in Paramount for repairs and upgrades. You have to check these guys out. They are the real deal classic Mustang shop.

Holy FUCK that green Chevelle was nice. Love the videos, always enjoy the surf and rockabilly music you choose. Very scenic where you live.

Sounds nice. Here in New Zealand . I had a 68 notchback . [ org 289 cui ] some one here all ready put a 69 302 cui with c4 trans. i had the trans shift kitted here. also found out the valve body had larger vac holes drilled. My Auto trans guy told me. Thats what Mopar did in there torque flites . from factory. i did put a 8inch back in. as a borg warner was install. put a 4 barrel unit on the engine. which i added . i could cruise at 50mph. put my foot down, kicks down and spin those tyers . Miss that beast though. some else owns it now

Great to see you back. Totally enjoy your videos 😊

Love the car man! I picked up a 65 Mustang project car in November and plan on incorporating a lot of things you did into mine! Can't wait to get it on the road!!!

Hey youre back!! We missed you!

I don’t want any of that high tech fuel systems. I’m still running with the original Holley List 4555 780 Holley in my 70 Z/28 4-spd. It works.😅

My new favourite RU-vid channel. Rock on!

Glad to see you back! Hang on to that car even if you start another project. I miss my first car. 67 Firebird 400 convertible. Thanks for sharing!

Love that car!

It's a pleasure to have you back sir

😮never paint it Ben! It looks so good as it is. If you wanna do more, why not upgrade drive line or fit a/c? Love your content.

Always love to see the mustang back out!! Just glad to see your out and about and happy :)

Whaaaat beeen waiting a looong time lol good to see you bro

Where you been dawg!!!??? Happy to see you back, Ben!

Damn she sounds nice! If you want to go further...get another project! The Mustang will never be quite finished but I think it's true spirit is it's current form!

Great to see you back my guy. I love that car and your journey with it as well. Please keep prioritizing your personal life and we'll see you when you've got something to show us.👊

guy at my garage said a nice upgrade for the mustang is to drill some rectangles in the tail light housing, put some rectangle LED's in there. looked realy great on his car im doing it for mine aswell

Long time no see boss man! Hope you’re doing well!

Hes back!!

Thanks for the 'Check In'. The Rear Shock install reminded me of something I have wanted to do to the Torino for a long long time. I want to get the rear top mounts out of the car body. Access from inside the trunk is extra hard because I have a Fuel Cell. I bought the basics (a weld in Cross Bar and Tabs) and have just never finished pursuing if my idea is correct.

Id say reach out to any paint shops to see if theyd do the paint for you. Lastly as a big project see if you secure a bigger engine for it. Then youd really have the ultimate.

Great to see you back Ben! You do a really awesome job when you do put something out! I would love to see like an update on the Burbank Choppers and what they are driving now and what’s going on with them.😎👍

Yeah Buddy, hang on to it. Just like your dad’s cars. I regret selling my 69 olds cutlass that my dad gave me. But college was important back then. Searching high and low for a good one. Love your vids. Hope to see more. 😊

Been missing updates on the stang so it’s great to finally get a new video!

Personally, I'd like to see you put a carby back on the 302 and use Thunderhead289's Carb Cheater instead. I reckon it's better, it solves the problems of carbies being a static metering unit while keeping the sound, feel/tactile experience, etc. Still has a rev limiter, ignition lock, data logging and requires no wires to pass through the firewall. 4 wires and 2 vacuum hoses plugged into the supplied spacer. I'm sure you've seen Luke's lawn mower carb & skyram intake videos haha!

Good to hear from you man. Its been a while :D

Good to see you posting.

Good to see that you are doing well!

Hey Ben! Lets go for drive! I am in the LA area and never really get a chance to take out my vette with another car!

And he's back!!!

I was guessing you were in witness protection...... Small block Fords sound different and so good to me personally I wouldn't feel the need to go more modern. No matter what you do next for a project though, the good news is a rust free, great running 65-66 will bring a a pretty penny. Probably hard to hurt the value much unless you go crazy LOL.

I like the upgrades you made. I still prefer the carburator for my 68 Mustang but this is only because I do not otherwise. After stroking the motor, the car had from one moment to the other about 40 hp more than previously. I did not change the rear axle so it is pretty fast on the first yards after the traffic light turns green. 😀 Now it is more a cruiser than it was before, and I like that. I am completely happy with the magna flow exhaust I put on her.

Good to see you again! Keep rocking the stang! Don’t ever sell it ! When can I send you some pics of my 67

Awesome! Great to see you back at it!

You're back! Excellent

Glad too hear u was on, gotta luv all those companys that really helped the 65 out, hope gramps an pop are doing well, did pop ever sell the Ford ?? Keep safe untill next time

Nice mods on your car, with your work on your car, at least we would know what to expect when we get our foot wet in hopping up our cars❤

And he’s back 🤘

Glad to see you back making content.

Car sounds AWESOME!

Always enjoy your videos, cool to see a new one! Car sounds amazing!

Welcome back Brotha! I think any new project to take on will be great, looking forward to it. :)

I'm glad you're back!

Morning Benny! Haven’t seen you for a while mate. Great to see ya 👍🇦🇺

Good stuff, Ben. Nice to see you around.

Welcome back. We’ve missed you!

Love your car bro 🔥

You’ve made some excellent mechanical upgrades throughout the years. If I was you, I would next upgrade the lighting, paint and wheels. PS. Don’t ever sell that car!

Very cool!!!! 👍👍

Sweet Mustang! Everything doesn't need to be fancy, you have a great period look to it man. Everything matches perfectly lol

I bought into Alden American after watching your video. Handles great. More travel in rear end would definitely improve the rear.

Hey man, Good to see you again. It has indeed been a while but it's cool to know that you're doing alright and still have your Mustang. It's also nice to see that it's still being ugraded and updated little by little, if you keep going like that, it'll be such a epic and outstanding machine after some time.

Damn I was just wondering where you went a few days ago! Good to see u back!

Nice to see a vid Ben! Jealous of that Cali weather haha! Aldan are great!

Glad your ok and back on there ,you do make very good videos ! Good luck Ben

🔔😎🇺🇲 Good to see you again. Always enjoy your content. YeeeeHaaaaw!!!

Ben! This was a nice update I missed the stang dude! Hope to see some more vids bro 😎

Man I love that car! I hope to have my ‘68 back in the road this summer. Been wanting to do coil overs. I’ll definitely check out Aldan American. 🤙

WOW I was just about to drop you a note and see if you were OK!!! Great to see you. Lookin good. Thx

Paint the car it totally deserves it, I have a 68 mustang as well keep posting, do the dash next I did mine it was a little challenge but looks great

Buy one of the Novas in your B-roll. :) The Nova is the perfect contrast to that Mustang without the high cost of a first or second gen Camaro. As a SoCal kid myself I daily drove my first Nova for 15 years. (Granada Hills) Now as a 40 year old I have another Nova and a Mustang and it remarkable how each car gives me joy in different ways. My current mustang is a Shelby GT500 but I hope to sell it and buy another '68 to build. Before I bought the Shelby, I had a '68 Mustang with a 347 and a 5 speed. :) All we need in life for happiness is a good family, a reliable car and two project cars. :) G/L Thanks for the videos.

Very cool car

Missed you Ben!!!

Nice update. Hopefully to see more from you.

Classic truck for the new project 👀 !!!!

Stance is perfect, as are those wheels.

Got really excited when I saw you finally made a new video!

This car would be my dream project! Keep it coming bro 😊

Miss your content bro, so glad to see you back 🔥

I was worried about you! Miss the vids ! The Mustang has come along way. I've been subbed for along time and neat to see the stangs journey. 💯🔥🇺🇲

He's back!!!!!!

Great to see you back in the driver seat and behind the camera! Love that the Mustang is a test mule for products and ideas! Between your dad and your grandfather and all your friends and contacts, you should be able to find a project! Would make a nice graduation present for you and us viewers! Go Ben and Four Speed, keep moving forward!

Helll yeah he’s back!!!

Missed the videos man, glad to see you back. 🎉