1968 FORD F100 OLE PUDDIN - 4bbl Carburetor Conversion & Timing Chain Install / TOUGH Week of Work!

Подписаться 50 тыс.

Просмотров 23 тыс.

50% 1

1968 FORD F100 OLE PUDDIN - 4bbl Carburetor Conversion & Timing Chain Install / TOUGH Week of Work!
Check Out this video: • Which are FOR SALE? Sh...
Check Out the RevStories Channel: / @revresale
I finally get all the parts needed to make Ole Puddin faster and weak less. The 1968 Ford F100 truly needed to have a 4-barrel and it needs some maintenance. This truck started at the Family Graveyard and now it hauls the family around. Will this be a straight forward install? Fords are never straight forward. The issues start early and stay until the last day. But oh she is surely fun now... What do you think of the finished product? All these questions answered on this episode of RevStoration.
Please like, subscribe, hit the bell, and come back for more crazy episodes on RevStoration.
If you want to send us stuff, send it to the love box!
P.O. Box 143 Porterdale, GA 30070 - Thanks ahead of time!
Music from EpidemicSound.com
Thanks for watching!!
Keywords: 1968 Ford F100, Interior Restoration, Overhaul, Mercury Comet GT, Granada, Ford, 302, Abandoned in Woods, Covered in Limbs, Old Car Restorations, 1962 Falcon, A/C, 1966 Ford Mustang, 1964 Ford Fairlane 500, Old Truck Restoration, Revivals, Rescues, Start-up, First Time Start-up, Garage, Turning Wrenches, Rev, Restore, Rev It Up, Crank it Up..
#Puddin #1968FordF100 #4bblConversion

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 212

@davesawdey9468 Год назад

There's a simple formula for life---- Worship the Lord,and drive a Ford. God bless ya Rev,and your family. Keep the awesome content coming brother. Semper Fi

@speerspeerjeff Год назад

My wife was literally laughing out loud when yelled at that cat."looks like the pastors getting a little frustrated "...SIMMA DOWN NOW!

@supermullaney Год назад

Great video, engine looking great!

@waynejrnapper2107 Год назад

I bet the ole man would love to burn rubber in old puddin. I enjoy all your videos.. I love to see the smile on the ole mans face when them cars and trucks starts and them burn outs.Keep up the good work and enjoying time with the ole man.

@ronaldburgess2884 Год назад

Your cat was driving my cat nuts!

@jeremyTallen1 Год назад

Finally someone using a vacuum gage. The whole tuning by ear was ment to get it close enough to run not a final tuning.

@NathansMoparGarage Год назад

I have learned a long time ago nothing ever goes as planned and some of the easy stuff is just a big headache. Glad you got it done.

@RevStoration Год назад

Always something but the finished product was better than expected.. 400 more expensive but worth it!

@kbobdonahue1966 Год назад

Gotta love Ole Puddin aka 1968 Ford F-100. God works in mysterious ways. Definitely worth the wait. Love the cat 🐈 😻

@billdyke9745 Год назад

I guess your Schaden is my Freude... Enjoyed that muchly. Now, repeat after me... 'If it ain't broke...' 🇬🇧👍

@RevStoration Год назад

True.. but it is better... after 50 different headaches!

@LarryDeSilva64 Год назад

Glad to see you gave Ole Puddin the maintenance it needs and yes indeed you sure made it run better. You did some really fine work for a Pastor. Oh and thank you for your prayers had my second monthly Chemo Therapy treatments and its working. My white cell count dropped to normal. my serum protein level is returning to normal my Uric Acid level is normal basically everything that was bad is going to the good side. Four more monthly treatments and the Oncologist says I should be Free of the B-Cell Lymphoma Leukemia.

@terryeustice5399 Год назад

Rev. David I hope you and Nikki T had a wonderful Valentines dinner.❤ Glad you got it straightened out. But, the end of the video was tough. And finally got that fixed. Puddin is good . God Bless you and your family. 🙏🏻✝️

@14firewooddirtysouth Год назад

Best video on here love everything you do put a battery in a car make a video about I still love it keep everything you do gratefully for you and your family thanks God bless you

@Oldschooljake1979 Год назад

I got an old 83 Ford F-150, 300 straight 6 cylinder. Love's it's gas, but can't stop it. I haven't messed with it in 3 years, hooked up a good battery, and put a small gas tank in it, because that's why it was sitting, gas tank got a hole in it, but got it started, didn't run the best, but I figured it wouldn't. Well got it 2 miles down the way to my shop, and I shut it off, and as I was looking under the hood seen smoke coming out from under the carb, I grabbed it, and it pulled off in my hands. So that truck started and ran with no nuts, or bolt holding it on. Suction must have been the only thing holding it on. Lordy lordy, what a Ford.

@Oldschooljake1979 Год назад

Glad to see ol' puddin got a new ticker. Looks great and sounds great also.

@deweygill1973 Год назад

Nothing puts a smile on your face like a 4 bbl opening up

@t-rodzgarage Год назад

Hard to beat a well tuned 302. Sounding and looking good!

@ryancooper2826 Год назад

Y'all got old Puddin running better than a new one. Great job as always! God bless y'all too!

@ericgriffin397 Год назад

Ol Pudden is running like a scalded dog now!! Great job!!!

@jimratliff9147 Год назад

I glad that you are back. I thought you left the show. You and the old men are the best that works on old Ford. God bless you and your family and the old men family to . From Jim

@libertysgarage8411 Год назад

Ol Puddin is running top notch! I remember when those Edelbrock carbs were $200 new.

@RevStoration Год назад

The good Ole days.. they figured out we will pay more.

@libertysgarage8411 Год назад

@@RevStoration I've bought a couple cars for less than a new carb cost these days. Lol Edelbrock does make a good, reliable carb though.

@pokey999991 Год назад

Yep! Rev, We used to use an old undershirt to filter coolant pouring it back into radiator! Any type of filter will work thou! Just needs filtered for dirt and grime you don’t want in cooling system! Praise The Lord!

@raymondsprengelmeyer1278 Год назад

I love your videos, not every job goes as planned, thank you for sharing!

@Hobodeluxe960 Год назад

sometimes cutting corners ends up being more expensive than just doing it right the first time. this is a teachable moment :)

@RevStoration Год назад

Corners cut got me for sure... worked out in the end!

@Hobodeluxe960 Год назад

@@RevStoration yep eventually you got her straight. but it cost you in time and other parts. all those gaskets and spacers and labor , carb kits etc. She will probably get better gas milege too if you stay out of the secondarys :)

@sgttombailes3380 Год назад

Love that Georgia Jacket !!! GO DAWGS !!! HooAH !!!

@joelee8156 Год назад

Hey, Rev, I really enjoy your videos, I’m an old Ford Fanatic. My first car was a 1958 Ford Custom 300 two door sedan with the 292 cubic inch V8 and 3 on the tree. I traded it off and have regretted it ever since.

@davidthrash6096 Год назад

Cats gotta love them

@jimratliff9147 Год назад

Did you and the old man left the show. I was waiting on you and the old man 🌞 night for you to come on. I asked a friend about it 👍. I hope 🤞 you and the old man are going to still work on car 🚗 and old truck 🚛. God bless you and your family. God bless the old man and family to. From Jim

@jackmcgill3150 Год назад

Maaaan! Thank you for getting Ole pudin going again! Ole puddin has a big fan here! Thanks for doing what you do. Love all the videos you do. Bless yall!

@danielstrachan8988 Год назад

Wow, that super zoom was interesting 👍👍😮😮

@RevStoration Год назад

Not intentional... my fault

@kennethsonier1766 Год назад

Ole Puddin is running sweet! The engine work you did came out really nice. I could tell it really killed you to replace the original carburetor but the Edelbrock is a great carburetor. Keep up the good work and may God be with you all 👍✌️🇺🇲

@dannysublett1014 Год назад

Love ole Puddin

@eddiepatterson5025 Год назад

Ole puddin runs really well. I know you wanted to stick with the factory 4bbl but it really runs good with the Edelbrock. Have a Blessed One

@donnie2533 Год назад

Great video. I'm glad you posted. Keep them coming, thanks

@robertvance1873 Год назад

I'd definitely buy a little Puddin Truck 👍

@johnmontague4245 Год назад

Greetings from Scotland Rev, That was a great job you did there. The engine looks and sounds perfect. I love the sound of the old V8’s, especially in the American vehicles. You had your work cut out for you there, and along with your ‘day job’ I’m sure it was hard going, and probably a little frustrating at times. I look forward to yo posting new videos with the ol’ man and regardless of the vehicle involved I enjoy what you do. If I’m honest though, I have a soft spot for the American trucks. Keep on keeping on David…. Good bless ya & your family.

@RevStoration Год назад

Thanks John, God Bless!

@dennishernden2264 Год назад

Your u-joints probably went bad from pulling rigs out of the weeds. I was pullin stumps with my Ranger and I was impressed how well it did, then about 5 miles down the road the driveshaft fell right out. LOL I wasn't mad, after fun truck stuff you get to spend quality time with yer ferd.

@RobertDickens2002 Год назад

Okie puddin just dealt with that same exact problem with that same exact space he filled it with JB weld.

@RevStoration Год назад

The metal plate worked but the edelbrock and right spacer worked better..

@eugenesbackyardrepair4593 Год назад

I knew thoes red rags would come in handy. I use them all the time love em . I need to order me some more for myself.

@deborahwebb3598 Год назад

God bless all of you!! My husband said Edlebrock is the much better than a Holley!!!!

@robertvance1873 Год назад

Puddin's Fab shop had the same problem with a carburetor and he filled in the hole with JB weld and it worked.

@jamesmcdonald5868 Год назад

Every time a Ford waterpump bolt breaks, the first one to go, is that upper driverside one. My 89' Grand marquis with the 5.0 did the same thing trying to come out. 1/4 drill bit in the housing, drilling 3 holes. Slapped on the vice grips, and lubed it up in the holes. Tighten, loosen, tighten, loosen, tighten then loosened it right out. Replaced the innered, and slapped it back together. That upper hole isn't a water jacket, so the hole didn't matter. JB weld, and away I went.

@paulemerson693 Год назад

Love you rev wished you were close enough to me I would definitely come to your church and I love what you do. I love with your dad. He does to text me back to my old days law for Paul from Michigan.

@Junkerclunkerz Год назад

Love it rev zoom zoom lol

@chicagovasko Год назад

Ole Puddins dialed in sounds great I'm glad we got the extra spacer

@JimBascombe 10 месяцев назад

I tore my 68 totally apart this year. All new engine, and transmission. All new brakes. Ect ect. And now it is Winter time and i don't drive it in the snow. So i took it to my buddy's body shop for a paint job. Should be back on the road my next Spring. I can't wait. You think that intake was heavy. Pick up one from a 390. Lol

@AndrewHCann Год назад

Excellent video Rev :) also Ole Man Dad Eugene :) , Mom Bear of Dave :) , Nicky T :) , nice put on Puddin truck a new intake plus Carb to also Water Pump plus Time Chain plus gears also engine oil too ! RPM for low should be 750 to 850 , have choke open at 1/8 open on flap on cold and warm up to & mixture screw set when motor sounds runs smoothly and high RPM 3.000 for 4 barrel kick should be when hit 60 to 80 mphs drive down roads on Speedometer! Feel bounce plus get faster speed to on gas pedal push down more 3/4 down towards floor ! Thermostat want make got right of Silver or Copper types for type of green Antifreeze to tell on gauge right temperatures Dave! Also wonder were you did left Valve Cover vent cap to but put to side and got on thought lost on road test Lol!

@Junkerclunkerz Год назад

Thanks rev bob Brittany and I are sitting here watching your video and that cats going off well snicker one of are pups starts barking at the TV so thanks for that hahahaha

@eugenesbackyardrepair4593 Год назад

I never thought of that but you don't have any Revstoration shirts to buy. I never buy youtube merchandise but for you I'd make an exception. Love the video

@douggrove762 Год назад

I would put a 351.in it if it was my truck. I had a 79. Ford . I loved that truck.

@Trenton-om9qs Год назад

Great video as usual. Good to see more of Ole Puddin

@patcarbone1753 Год назад

Love old puddin

@waynemcgavic4709 Год назад

I am with you rev. I don't care about ugly either

@RevStoration Год назад

I'm glad my wife overlooked it at least once. Thanks for watching Andrew!

@rickwright7267 Год назад

good job there paster i hope you get it running good i like your videos 👍👍

@whitehorse420 Год назад

Hot doggie !! A Ford video, I knew Ole Puddin wouldn't let us Ford fans down. I think Ole puddin deserves some body work and a paint job. Come on Rev 😆. Tell the Old Man to dig in some of that molded money he has stashed back and make it happen. 😆 Loved the video guys. God Bless Brothers.

@jeffcomer8317 Год назад

Nice red bronco

@leighbratcher1998 Год назад

That project looks like some of mine. Great job, Ole Puddin is running good.

@stevenmenary2862 Год назад

Stacking dimes, Haven't heard that phrase in decades.

@gregorygibson5455 Год назад

Hello Rev and the ole man

@gregoryamaral4838 Год назад

David, I worked 9 years putting Ford PU together they are welded like crazy the floor pans A posts. They are great

@shanewright6958 Год назад

Great job guys.. Another great video 👍👍

@RevStoration Год назад

Thanks again!

@wayneyoung6094 Год назад

My first car was a 65 Ranchero, that we pulled the inline 6 out of, built a 289 for. We had the same issue with a 4100 Autolite, Dad rebuilt it multiple times and never could get it to run right, he ended up going and buying a new Holley 4BBL for it. I think that carburetor was just worn out.

@leegoldeneagle9003 Год назад

There u go very sweet 🙂 looking good love it Lee

@daleschuler1720 Год назад

Good video, I'm glad you didn't use the Edelbrock Torker manifold because it's a single plane made for 1/4 mile drag racing, no good for the street.

@big.ronwisconsin9598 Год назад

I would of been 1 year old when Ole puddin came off the assembly line. You just can't beat a old Ford but I must confess I now drive a 19 year old dodge ram 1500 she's rusty but trusty and I'm just a suckerer for that Hemi.. God Bless you and yours Rev.

@robertlacob8831 Год назад

Great video for those once in while/first time engine modifiers! Sometimes , especially with used parts, things go wrong! When you make a mistake, admit it and move on to fix it so others can learn from it. I applaud you Rev and listen to the Old Man more, as he didn't fall off the turnip truck last night! Truck sounds real good now!

@adamantvermont Год назад

Flexi-hose Sir Mortske would be proud. He likes those a lot. ha ha.

@TheJohndeere212 Год назад

I ended up getting a Brawler 4 barrel carburetor on my 302 engine in my old 86 Ford. I had a 302 HO engine out of the Mustang GT and into my truck and it is running great so far.

@garysimonson9593 Год назад

Autolite 4100 is still one of the best carbs. Summit has a modern copy of it today.

@RevStoration Год назад

Autolite 4100 is.. but this particular one... nope!

@chicagovasko Год назад

Don't know what you fed that cat before but it musta been some good grub. :) great show rev.

@andykeen6219 Год назад

You’re a proper nice fella - really enjoy your content. I like the way your like a normal working bloke like the rest of us 👍

@johnnymack8442 Год назад

I love the Edelbrock/ Carter AFB carburators. They are the best street/strip carbs

@JDDOWDY Год назад

Awsome job. Thank you for sharing your video. God bless from west Texas.

@mikeobrien3744 Год назад

If the secondaries open you'll feel it

@cwbintn8949 Год назад

lmao the cat mrooowing makes the video that much better

@areidskyraider1966 Год назад

Hi, Rev It's great to see everyone is well and safe. Ole Puddin sound more beefy with the Ederbrock carburetor. I would like to know if you ever come across any parts to a '66 Ford Mustang 2+2 fastback? Please let me know if you do. Rev take care my best to everybody.

@holeeshietpyro4072 Год назад

another great episode,

@shartne Год назад

What you need is a Carter AFB or now day Edelbrock bought them. 4 barrel Edelbrock carb. I put a 4 barrel Carter AFB on my 67 mustang. I ran a hole in the wind. oh I see you went and got one. hard to beat the edelbrock.

@randyriggs5463 Год назад

Ol Puddin sounds pretty healthy to me. You do what works for you Rev! Nice video!

@grantmelcher1830 Год назад

Worth the wait Rev! Engine sounds good!!!

@theawakening5548 Год назад

Check the emulsion tubes, they are known for cracking when sitting.

@kenpenry6597 Год назад

Sure enjoyed your video thank you

@ryanhawkins1235 Год назад

Maybe JC needs one of those USB battery bank and Jump packs in his truck.

@chicagovasko Год назад

I always agree with Ole man. Bust revs but Ole man. Lol

@wilenelson1810 Год назад

Awesome! 🏁🔧🏁🔧🏁🔧🏁🔧🏁🔧🏁🔧

@jamiepattersoniwantthecar3512 Год назад

Happy to see your videos whenever they come

@charlespendola4775 Год назад

Great job!!! God bless you and your family!!

@jamescampbell3558 Год назад

Nice work on the engine,looking like new!

@ATOMSHAMRADIO Год назад

REV. Its about time Nikki T showed up you leave her out lol god bless🙏 iam just kidding good to see her💯👍

@davidbrumfield158 Год назад

You can definitely come up with some cool t-shirts with all those cars you guys have

@rickylaporte6750 Год назад

Awesome video thank y'all

@eugenesbackyardrepair4593 Год назад

Puddin Fabshop had same spacer issue but he filled it with jb weld then sanded it flat.

@sphinxkamikaze8746 Год назад

Rev, I am doing the exact same 1406 on a 302. I would love to see what you did to make the kickdown and throttle cable work. There aren't that many videos of this exact setup. Love the channel. Thank you!!

@RevStoration Год назад

Edelbrock 1483 is the part number.. It bolts on the throttle side of the carb and provides the kickdown linkage. Very straightforward!

@retrophilosopher9380 Год назад

Great video! You still got them pinto running.

@murvisstribling4035 Год назад

HAPPY Sunday REV and family

@daviddamico4288 Год назад

Nice work rev , I’ve had good luck with that carburetor a lot better than a holly…

@dannylee9138 Год назад

I would have to put a little bump stick in it while I was that far in it

@BillHilly169 Год назад

That’s a good looking good running engine. But it’s a Ford and that’s what they do!

@pokey999991 Год назад

You got a Kitty? Or is it a stray? I love kitties! I am the Crazy Cat Guy! According to my sister, who bought me the big , big Coffee Mug that says, “ Crazy Cat Guy! “ With a picture of me, not really, with Kitties all over Him, Me! , love the videos!