I can't believe that I missed the fact that the Z bar was floating in mid air on the engine side on the previous video. I just looked at it again and yup, it was not hooked up to the engine block. You probably have that Z bar pivot bracket lying around there somewhere. That bracket bolts to the block with 2 bolts. I readily remember mine as when I took off my Z Bar to change it, as it was in really bad shape, I had to take of that bracket off the block. The bracket pivot stud is riveted into the bracket and the riveting had loosened over the years and the pivot had some play in it. I had to weld the riveted side of the pivot so that it would no longer move.
