Тёмный

1984 Chevy K10 LS Swap Project Part 6 (Custom K10 Engine Crossmember) 

Lonnie's Garage (Puppetkicker)
Подписаться 23 тыс.
Просмотров 3,1 тыс.
50% 1

If any of my videos have helped you in any way or inspired you or if u just want to join to help out a little, then please do so by going to my Patreon page and giving a donation. God Bless...
/ puppetkicker
Check Me Out Or Find Me On Facebook: Lonnie Rice ... lonnie.puppe...
I Also Have A Facebook Fan Page Located Here ... / puppetkickersgarage
You Can Also Hit Me Up On My Google+ ... plus.google.com/u/0/104744233...
I have sticker decals for sale also. Just ask me about how to get them.
---------------------------------------------------------------- ---††††-- ---††††--- †††††††††††† †††††††††††† ---††††--- ---††††--- ---††††--- ---††††--- ---††††--- ---††††---
*ALL GLORY GOES TO MY LORD **JESUS CHRIST*
"I own all rights to this production"
▼▼▼▼
Disclaimer:
....Don't Try This At Home Without Help And Or Supervision.....
My Videos Are Made For Educational And Entertainment Purposes Only. You Should Always Get Professional Advice And Training Before Using Any Power Tools. I Will Not Be Held Responsible For Accidents or Damages To Yourself or Anyone Else's Property.... Proceed At Your Own Risk!!!!!!
✞Subscribe if you would like receive new videos in your feed ... / lonniesgarage
✙Stop by my RU-vid channel for more videos ...
/ lonniesgarage

Авто/Мото

Опубликовано:

 

14 май 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 16   
@afriendtoleanon3401
@afriendtoleanon3401 2 года назад
im headed to the steel store in the morning for metal for my crossmember . 1985 k10 5.3 4l60 with a 6 inch lift so i have to keep drive shafts where they are . i cant move motor fwd . have to remove crossmember and make a new one . ugh so much to this lol . on week one motors out front clip is off gas tank out ac and heater are out heater rebuilt front end wire wheeled and painted .im getting it but the hours are long . got to hurry up before i get called back to work LOL
@Jm8126-5
@Jm8126-5 3 года назад
The reason is because the original mounts sit 3/8 inch higher than those tejas mounts. The original mounts had a plate for the bracing.
@anthonybarber5876
@anthonybarber5876 4 года назад
I just want to say thank you for the awesome videos. I've watching your c10 build. My wife and I plan on doing a LS 5.3 swap in my 86 c10 when we return from Japan.
@LonniesGarage
@LonniesGarage 4 года назад
Good deal. Thank you for watching. Good luck with your project
@sj8008002
@sj8008002 4 года назад
Looking good!
@LonniesGarage
@LonniesGarage 4 года назад
Ty
@Squarebody1987
@Squarebody1987 4 года назад
Very nice work man 👍🏽👍🏽💯
@LonniesGarage
@LonniesGarage 4 года назад
Ty
@marcoceccarelli6415
@marcoceccarelli6415 4 года назад
You do nice work. In hoc signo vinces.
@LonniesGarage
@LonniesGarage 4 года назад
Ty
@rafatrill
@rafatrill 4 года назад
U should weld the back side also
@austinmitchell9382
@austinmitchell9382 2 года назад
Why did you not like the spacers? I got street rays ls swap mounts trying to make it work and the oil pan is hitting the crossmember.
@LonniesGarage
@LonniesGarage 2 года назад
I didn’t have spacers.
@austinmitchell9382
@austinmitchell9382 2 года назад
34 second in you mentioned the 3/8ths spacers under the factory mounts I was wondering why that wouldn’t work?
@lsxsandman
@lsxsandman 4 года назад
Are you keeping it 4x4?
@LonniesGarage
@LonniesGarage 4 года назад
Yes. I've got videos on here showing the set up for 4x4
Далее
How to LS swap an old GMC Chevy square body
10:45
Просмотров 7 тыс.
кажется, началось
00:45
Просмотров 1,5 млн
LS Swap your Squarebody!  What to do first!
17:05
Просмотров 61 тыс.
Custom Motor Mount Build
10:57
Просмотров 12 тыс.
1984 K10 14 Bolt Rear Disk Conversion
22:33
How to Pancake a C10 Crossmember #pancakeC10crossmember
30:23
EXEED VX отзыв владельца #shorts
1:00
Просмотров 3,4 млн