1985-1990 Toyota Land Cruiser FJ60 and FJ62 Steering Box Seal replacement

Подписаться 5 тыс.

Просмотров 20 тыс.

50% 1

Part Numbers in the Description
(1981-1984 Land Cruiser FJ60 steering boxes are similar but slightly different when mounting)
_______________________________________________________________________
Specter Off Road Rebuild Kit for Fj60 / 62 Power steering box
SOR Part Number : 099-20L
SOR.COM
_______________________________________________________________________
17 x 1.5MM inverted Flare to - 6JIC Male adapter Return (Toyota)
Part Number : SFO7
16 x 1.5MM inverted Flare to - 6JIC Male adapter Pressure (Toyota)
Part Number : SF06
SUMMITRACING.COM
_______________________________________________________________________
www.corsetticruisers.com
►FOLLOW US ON SOCIAL MEDIA!
OUR INSTAGRAM (@corsetticruisers) ►
OUR TIKTOK ► (@CorsettiCruisers)
►Business Inquiries: For sponsorship requests or business opportunities please contact us directly: info@corsetticruisers.com
►WARNING: This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Have fun, but always think ahead, and remember that every project you try is at YOUR OWN RISK.
SHOW LESS

Опубликовано:

12 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 51

@CorsettiCruisers 2 года назад

What type of content would you guys like to see ? Comment below ! 🚙

@davidcousineau6605 2 года назад

Knuckle rebuild

@CorsettiCruisers 2 года назад

@@davidcousineau6605 we'll get on it soon as we have a cruiser in the shop needing one!

@yananRamirez 2 года назад

tie rod and relay change and adjustment, best regards!

@CorsettiCruisers 2 года назад

@@davidcousineau6605 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-P_XawrVJXE4.html

@CorsettiCruisers 2 года назад

@@yananRamirez We will work on it! Good call

@paulflor198 2 года назад

Awesome video! Thank you for posting this. I'm in the process of rebuilding the gear box and this was what i needed. Much Appreciated!

@CorsettiCruisers 2 года назад

thats awesome glad our videos could be of service to you !

@michaelyapp6099 2 года назад

super helpful, well done, clear and concise. i have to do this exact job to my cruiser. Thank you so much.

@shahramrahman2752 16 дней назад

Very thank for video information 👍🏻💐

@FJ40Jim 10 месяцев назад

No thread sealant is needed on the JIC flare fitting. The seal occurs on the brass flare seat in the bottom of the hole.

@TnFJ62 9 месяцев назад

I love the information. As an aircraft mechanic, I'm surprised that the components weren't put through a parts washer or cleaned more than a wipedown. I know that sounds overkill, but it's probably the only time in the lifetime of these vehicles that you will ever get to inspect these parts.

@CorsettiCruisers 9 месяцев назад

The tech in this video is a previous aerospace tech as well. We do not suggest putting teflon parts, bearings, shaft and seals in a parts washer as it causes premature wear and tear. It can also introduce moisture/corrosion into the system. We have found that on a steering box rebuild, that a thorough wipe down with brake/parts cleaner does a better job and is less abrasive. We use the parts washer for all cases and housings (this steering box case included). We also suggest upgrading the steering box to an 80 series and changing the sector shaft to a 105. That will give you a tighter steering radius with better drivability.

@adamalnaqib7838 17 дней назад

نشكرك على هذا العمل ونتمنى الترجمة الى العربية

@davidcousineau6605 2 года назад

Great video! This is on my list to do...after seeing this maybe I should have it done for me?

@CorsettiCruisers 2 года назад

appreciate the support ! its a tedious task but well worth the satisfaction when its all said and done.

@mattblack6268 Год назад

Great vid mate, well explained. Just found your channel.

@Anth0nyPain 2 года назад

Great video!

@yananRamirez 2 года назад

awesome and detailed video, steering balls needs to be changed?

@CorsettiCruisers 2 года назад

Make sure to check the condition of them before reassembling. It's hard to find the right replacement ball size.

@oscarpuente2029 3 месяца назад

👍

@lukarebersak221 Год назад

Why cant i get all the ball bearings back in? Tnx

@CorsettiCruisers Год назад

Its a process. Feel free to call the shop and one of our techs will walk you through it.

@fipsicola 2 года назад

good job! If it s the same at a 61 ?

@CorsettiCruisers Год назад

Assuming an HJ61? We don't get too many of those in the states but it should be the same.

@fipsicola Год назад

@@CorsettiCruisers yes, nearly the same!

@BarryTorno 2 года назад

Great Video. I just completed the rebilled of my steering box and its installed back on the Cruiser. No more leaks but I now have less steer to the right versus the left. Before tackling this project the FJ60 drove straight and still does but now the steering wheel is a little off center to the right. Any quick tips to correct the issue before I start adjusting stuff?

@CorsettiCruisers 2 года назад

It seems like you tightened the adjuster bolt on top too much. Make sure the box isn't adjusted too tight, otherwise the gears will wear faster and it puts more pressure on the steering pump. In regards to steering, make sure the steering box arm is facing the right direction when connecting. Feel free to call the shop if you have any more questions.

@BarryTorno 2 года назад

@@CorsettiCruisers Thanks for the quick response. I will give that a shot and let you know if that corrects the issue.

@Allfather88 2 года назад

Any idea how much different of a process would an FJ80 steering box would be from this one?

@CorsettiCruisers 2 года назад

Process is almost the same. Make sure to check the condition of the steering balls

@hugoaguilar3073 Год назад

Is it the same with a IFS first gen 4runner?

@Williams-world69 Год назад

Any special procedure to center the sector shaft or aligning the pitman arm? Or is there only one way the pitman arm goes on? Thanks!

@CorsettiCruisers Год назад

There are multiple ways to center the pitman arm. You can connect the steering wheel and count the turns to get it centered then attached the pitman arm accordingly. Always set the arm straight when you find center.

@aarons4981 8 месяцев назад

I’m confused here. Don’t you just need to align the marking line on the shaft with the marking line on the pitman arm?

@Williams-world69 8 месяцев назад

@@aarons4981 if you made a mark before taking it off hahaha

@ricardogarvin7423 10 месяцев назад

Hi there, can u tell me where would i be able to get the thrust ball bearings for this been trying all over🙂

@CorsettiCruisers 10 месяцев назад

Reach out through our website and our parts manager can help. Look at converting an 80 series steering box sector shaft with the 105 shaft. Just bolt the 80 series box up on build dates after June of 1985.

@marcoss4563 Год назад

This rebuild will help to reduce some play input in the steering ?

@CorsettiCruisers Год назад

This is mainly to stop leaks and replace bearings. You can tighten the steering box while you rebuild it but I would suggest an 80 series steering box upgrade if you want to tighten up the play. Pre 85 trucks will be more of a custom job. All other years are plug and play.

@marcoss4563 Год назад

@@CorsettiCruisers thank you !

@joedivetta383 Год назад

is it the same process as a 1998 105 land cruiser

@CorsettiCruisers Год назад

Slightly different boxes.

@cabdiqanibashiir8734 2 года назад

143

@kirkdecker7919 3 месяца назад

Dude, you miraculously just slide the bearing shaft down into the housing, no explanation or anything on how difficult it is. One moment it's out and another moment it's in. And that music absolutely sucks. Completely hideous. I'm missed you didn't even touch on that shaft going into the housing.

@kirkdecker7919 3 месяца назад

Pissed not missed

@kirkdecker7919 3 месяца назад

The annoying background shop noise and the stupid music you chose is just unreal

@kirkdecker7919 3 месяца назад

Otherwise pretty good video except no explanation whatsoever on the ease or major pain in the ass difficulty level on putting the wormgear shaft into its housing.