1986 Chevy K10 6" Liftkit Install 

That looks so good and I was glad to see that you listed the sizes of the tires and rims because I want to use the stock rims, they just look great

Previous Diesel Tech here, those cone keepers are a pain if you don’t know how to remove them but this is the absolute easiest way to remove them. Back nuts all the way but leave them on top on stud, take an air punch with a blunt end and air hammer on the top of the stud. The nut is there to protect threads. The vibration works the cone keepers loose in SECONDS. Some semi truck axles use these and I’ve had to remove probably 20 at one time and done them all in about 5mins! Thank me later! 🤘🏼

Beautiful truck. We both have the same set up and I’m glad I went with the 6 inch lift.

Looks Amazing. I didn't know if I should go with a 4 or 6 but the 6 looks great.

Looks like a completely different truck looks great

That look great and like a different truck. I had a 1987 red 3/4 ton truck 4x4 with the granny gear. I wish I still had it.

Looks good got a 6in skyjacker lift on mine with 35s but I wanna go up to 37s

That is a good-looking truck, u did a nice job!

😍😍😍 exactly what I want to do with my 86 c10 lwb, it looks so good

Did you have to put a new driveshaft different size or the same one fit

good job brother. ive got the same on my 87 k5

Nice looking truck. Love it in white!!!

Wanna do this with one of my 85's hopefully within 5 months

Very good work. It looks spectacular! I have a 1981 K10 with a 2" lift, and several times it has broken my front springs, I still can't find the cause. Greetings from Buenos Aires, Argentina.

5.7L in that truck? Awsome truck!

That is my dream pickup

I've learned that a drop pitman arm or adjustable drag link helps with the 6" lift. At 3:00 you can see the angle the drag link is in. It will wear it out and wear out that upper knuckle ball joint.

Great job man looks good 👍

Tengo una igual en color amarillo que estoy restaurando, te felicito, muy buen trabajo. Ahi me subscribo. Saludos desde Ushuaia, Argentina.

Dang. Cant find my rear spring anchor plates! Good looking truck.

nice looking truck

Mine doesn’t let me bolt down the springs with the drive shaft connected

Looks Great, good choice.

did you not have any driveshaft issues? Just installed a 4 inch lift on my 79 k10 and both front and rear are short

Looks way better than it did. And for once someone from California is lifting these trucks instead of butchering them and dropping them down to where they practically scrape the ground. It does them no justice and is ugly as shit. This 6 inch lift is perfect for the square bodies and yours looks sweet!

very nice truck

Hoping my BDS kit goes this smoothly, sitting next to the truck, a 78' K20 and a 6" lift kit watching you, trying to get my motivation up right now! Mine is a lot rustier but I had it all apart last year re-doing the front end and replacing spring stirrups and bushings so hopefully that makes this easier for me. I sprung the 2K for mine to get ALL the parts at one time instead of buying them later individually. Did you have to do anything with the drive shaft angle on yours? Mine has a carrier bearing that is making me nervous. It means more angle. How is yours rolling? Thanks for posting the vid.

Did ur front drive shaft hook right back up?

do you need to drop the transfer case or anything other than new springs, sway bar brackets, and extended brake lines? Looking at buying a 1990 k5 blazer and it will need new springs and tires anyway so why not go with a lift.

BADASS!!!!

I would have let the white lettering out To go with the 80’s theme. Especially with white paint. Looks awesome just the same

hey bro i have a 85 on 33's not sure if it has a 6 or 4 inch lift . its old dual front shocks . Can you tell me what the measurement is from center of hub to fender ?

Do you have to adjust the rear differential at all? I noticed you dropped the whole differential . I’m ready to purchase and do the same for my 83 K5. Last question, how is the ride and the flex?

I had a 6 inch suspension lift put on my 2001 Chevy and it didn’t stand half as tall as yours. That always bugged me. I dunno what it is about the older trucks but the same size lift stands them up a lot taller 🤷‍♂️

Please tell me you changed the sway bar bushings. Lol i need them and cant find the right set the eye bushing is hard to find

Nice video! Looks like your right side front is higher than your left side. Did you notice that as well?

You lift 6 inch... Dont have problem the transmission sistem? Or the Steering column?

Looks great man. I’m interested to know how are you liking the ride and overall lift of the Rough Country? I’m thinking about selling my 12” Super Lift and going with a setup like yours. I’m not getting any younger.

I’m 16 and I’m wondering is it very very hard to install one of these? Also what size tires do you have on it?

bom trabalho !!!

Bad ass!!!

Im a Ford guy, but that is a bad A truck 😎👍🏼

Been thinking about lifting my 87 GMC Jimmy with this same 6" lift. Were there any driveshaft issues? Also..i noticed you sold the truck...did it relate to an issue with the lift? looking for more info....thx

We’re did you get the break lines?

What size tires are on this truck

GMC Sierra 1500 1985 is what I have I’m going to get it painted black with a mirror finish and add a 3 inch lift I’ve already got a 2 inch lift on it I want bullet hole wheels and some bad ass mudders I got to get a new grill mines a little beat up then in need Leather seats

Where did you get the brake lines from

Do you have to get new drive shafts or do the original ones work?

Hello just curious what length you went with for front and back brake lines, Also nice rig.

Could you measure the bottom of the front frame height? I want the same setup but maine lift laws suck. Thanks great truck

Were did you get the break lines , thanks

Hey man what did you end up doing for the rear brake lines?

So you picked up better than 10 inches of lift

So it ended up being a 10in lift, because of the original sag.

Ya but no idea what your total lift was because you'r changed tires also

Nice blazer. What bracket did you end up having to purchase for your sway bar? I just bought the same lift.

what width are the wheels are they 12 or 8?

Porqué eliminó la barra de torció mr. Porque😵🍺

Nice truck. What size of tire did u put on

Let me have those Old Springs so I camped knives out of the.