Тёмный

1987 Foxbody Mustang | Idle surging Part 1 of 3 

Select Your Tools
Подписаться 1,8 тыс.
Просмотров 8 тыс.
50% 1

This is Part 1 of 3. They was multiple things going on and seem like all had similar symptoms. It would run just a little better after each repair. Stayed tuned on all 3 videos on running down all of the issues and maybe this may help someone. Thanks for watching!
Parts:
Full throttle body gasket kit: amzn.to/3ozDqzO
Idle Air Control valve gasket: amzn.to/3ozD1NO
Throttle body gasket (need 2): amzn.to/3z4uZ4I
EGR valve gasket: amzn.to/3J542lO
Throttle body cleaner: amzn.to/3S0k5Wd
Mass Air sensor cleaner: amzn.to/3J36FEK
Cleaning rags: amzn.to/3PGwj4b
Tools:
Screw Driver Set: amzn.to/3aMoQls
Torque bit set: amzn.to/3z8lNxl
Affordable socket set: amzn.to/3v1NtBm
1/4" Ratchet: amzn.to/3PcnHm4
3/8" Ratchet: amzn.to/3uVWSdY
1/2" Ratchet: amzn.to/3obekaC
Website: selectyourtools.com​​​​​​​
Facebook: / selectyourtools​. .
Instagram: / selectyourtools. .
Email: selectyourtoolshere@gmail.com...
Disclaimer: Links included in this description might be affiliated links. If you purchase a product with the links that I provided, I may receive a commission. There is no additional cost to you though! Thank you for supporting my channel so I can continue making free content and to help others!

Авто/Мото

Опубликовано:

 

24 июл 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 30   
@OrignalRobRobert
@OrignalRobRobert 21 день назад
I love honest videos
@selectyourtools
@selectyourtools 21 день назад
Thank you!
@MichaelHelfrich27
@MichaelHelfrich27 Год назад
This video along with swapping out my EGR valve seemed to solve pretty much all of my cold start idle issues. Thanks for sharing your journey as it helped me a ton!
@selectyourtools
@selectyourtools Год назад
Your welcome!! That’s awesome man! So glad it helped!
@covecreek3377
@covecreek3377 Год назад
Great work JJ
@selectyourtools
@selectyourtools Год назад
Thanks man!
@FootWedge68
@FootWedge68 10 месяцев назад
Great video on air intake cleaning steps 👍👍
@selectyourtools
@selectyourtools 10 месяцев назад
Thanks man!
@TekMan05
@TekMan05 Год назад
Commenting before finishing this series because I'm kind of dealing with essentially the same thing on my 5.0 Explorer so your video should be pretty helpful! ✌
@selectyourtools
@selectyourtools Год назад
Thanks! If your still having issues, don’t hesitate to comment the issues still having and maybe I can help! Thanks again!!
@paulrobinson5619
@paulrobinson5619 11 месяцев назад
Good job very helpful
@selectyourtools
@selectyourtools 11 месяцев назад
Thanks man!
@adamjustice6532
@adamjustice6532 Год назад
Good need to know information when working on EFI's. Even though it didn't totally fix it, I feel like that was something that needed to be done, certainly with all the carbon build up. Keep up the good work!!
@selectyourtools
@selectyourtools Год назад
Yeah, the build up was bad! Definitely needed it. Thanks man!
@karleck1119
@karleck1119 5 часов назад
Tps is adjustable
@Adrenacyde
@Adrenacyde 8 месяцев назад
Noticed that the gasket that went in between the upper intake and the EGR spacer was blocking off the EGR port...
@selectyourtools
@selectyourtools 8 месяцев назад
Your right! I took it back apart a day or two later and changed it out again. Thanks!
@dannyingamells6642
@dannyingamells6642 11 месяцев назад
Check the vacuum line to the MAP sensor. Mine was rotten and it had to be changed. In order to access the source, you must remove the plenum
@selectyourtools
@selectyourtools 11 месяцев назад
Thanks for the info man!
@CarbonPower
@CarbonPower 2 месяца назад
Mine idles great when cold right at 750 rpm. After i drive it 5 miles it starts surging like that at lights. I’ve cleaned everything and no change
@selectyourtools
@selectyourtools 2 месяца назад
May have bad sensor or possibly a bad voltage or no voltage to a sensor? Check voltage across the sensors. It may run ok until the computer starts trying to adjust after it’s warm. Just a guess though without knowing all the details. The wiring on these cars are getting brittle. I had broke wires running to EGR and TPS that wasn’t getting any reads.
@smallfry0764
@smallfry0764 Год назад
My car is idling rough at startup, but once it’s warm, and driving, it idles at 2000-2300rpm and will not come down. I hit the key back and forth and let it restart and it stays at 1,000 rpm. Just started last week. Can’t figure out why.
@selectyourtools
@selectyourtools Год назад
When you say you hit the key back and forth, are you referring to turning the car off and back on? If so, do you do that after it’s hot or is it still cold? When it says 1,000 rpm’s does it go back up after you start driving it again or does it stay around 1,000 rpm’s at idle after driving once you turn key off and on?
@bsalabao
@bsalabao Год назад
When mine did that it was a vacuum leak.
@selectyourtools
@selectyourtools Год назад
I thought the same thing at first, but I ended up doing a smoke test and never found any vac leaks.
@randybelcher6693
@randybelcher6693 Год назад
Where in Virginia are you? I'm in southwest VA, Martinsville
@selectyourtools
@selectyourtools Год назад
I’m in southwest VA too. I’m on the VA and TN line.
@randybelcher6693
@randybelcher6693 Год назад
@@selectyourtools hell yea! I have an 87 LX that I'm re-doing, gutted the whole interior and re sprayed everything and just got the dash back in, new carpet next
@selectyourtools
@selectyourtools Год назад
@@randybelcher6693 That’s awesome man! I plan on installing new carpet in mine too at some point. You’ll have to send me some pictures of it sometime!
@my88fox
@my88fox Год назад
Did you set your tps sensor to .94-.96 when you installed it? That plays a huge factor in idle/rpm as well.
Далее
1987 Foxbody Mustang | Idle issues Part 2 of 3
16:15
Просмотров 4,2 тыс.
1987 Foxbody Mustang GT | Heater core and Evaporator
40:44
1987 Foxbody Mustang | Idling issues Part 3 of 3
16:35
Просмотров 3,8 тыс.
Get Rid Of THIS Garbage in Your Foxbody Mustang 5.0
13:23
1987 Mustang GT Foxbody | 351w Swap Talk
17:12
Просмотров 7 тыс.
Fox Body Mustang IAC Test and Random Diagnosis Fails
19:58
Как вам такой Матиз?
0:15
Просмотров 646 тыс.